Yunsheng Zhang 
- (2024): Hydration behavior and cementitious properties of steel slag: From an early age to a long-term. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024).
- (2024): An investigation of the source of calcium carbonate from the carbonated Portland cement: Based on the transformation of hydrates. Dans: Construction and Building Materials, v. 425 (avril 2024).
- (2024): A mechanistic model of the degradation of cement-based materials subjected to sulfate attack. Dans: Construction and Building Materials, v. 421 (mars 2024).
- (2024): Mechanical properties and microstructure of waterborne polyurethane-modified cement composites as concrete repair mortar. Dans: Journal of Building Engineering, v. 84 (mai 2024).
- (2024): Investigations on Water Vapor Adsorption–Desorption of Cementitious Materials and Its Induced Permeability under Isothermal Steady-State Flow. Dans: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (janvier 2024).
- (2023): Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically. Dans: Construction and Building Materials, v. 399 (octobre 2023).
- (2023): Influence of gradation on extrusion-based 3D printing concrete with coarse aggregate. Dans: Construction and Building Materials, v. 403 (novembre 2023).
- (2024): Improved predictions of permeability properties in cement-based materials: A comparative study of pore size distribution-based models. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2024): The mechanical strength, microstructure, and transport properties of steel slag reinforced loess soil system. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024).
- (2024): Long-Term Performance of Sulphoaluminate Cement Blended with Different Contents of Limestone. Dans: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (janvier 2024).
- (2023): In situ visualization of water transport in cement mortar with an ultra-low w/b ratio under the coupling conditions of osmotic pressure, confining pressure, and temperature. Dans: Materials and Structures, v. 56, n. 4 (13 avril 2023).
- (2023): Investigations on atmospheric carbonation corrosion of concrete structure beam exposed to real marine-environment for 7 years. Dans: Journal of Building Engineering, v. 71 (juillet 2023).
- (2023): Mechanical properties of seawater-mixed steel fiber reinforced concrete. Dans: Journal of Building Engineering, v. 73 (août 2023).
- (2020): Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization. Dans: Cement and Concrete Research, v. 138 (décembre 2020).
- (2004): The influence of mineral admixtures on resistance to corrosion of steel bars in green high-performance concrete. Dans: Cement and Concrete Research, v. 34, n. 10 (octobre 2004).
- (2022): Investigation on the influence of modified waste rubber powder on the abrasion resistance of concrete. Dans: Construction and Building Materials, v. 357 (novembre 2022).
- (2022): Mechanical properties and antifreeze performance of cement-based composites with liquid paraffin/diatomite capsule low-temperature phase change. Dans: Construction and Building Materials, v. 341 (juillet 2022).
- (2021): Microscopic Modelling of Permeability in Cementitious Materials: Effects of Mechanical Damage and Moisture Conditions. Dans: Journal of Advanced Concrete Technology, v. 19, n. 11 (20 novembre 2021).
- (2021): Investigation on preparation and multifunctionality of reduced graphene oxide cement mortar. Dans: Construction and Building Materials, v. 275 (mars 2021).
- (2020): Influence of Initial Damage Degree on the Degradation of Concrete Under Sulfate Attack and Wetting–Drying Cycles. Dans: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 janvier 2020).
- (2020): Influence of damage degree on the degradation of concrete under freezing-thawing cycles. Dans: Construction and Building Materials, v. 260 (novembre 2020).
- (2020): Meso-damage evolution analysis of magnesium oxychloride cement concrete based on X-CT and grey-level co-occurrence matrix. Dans: Construction and Building Materials, v. 255 (septembre 2020).
- (2020): Investigation on parameters optimization for gas permeability testing of concrete: Inlet-gas pressure and confining pressure. Dans: Construction and Building Materials, v. 250 (juillet 2020).
- (2018): In situ observing the erosion process of cement pastes exposed to different sulfate solutions with X-ray computed tomography. Dans: Construction and Building Materials, v. 176 (juillet 2018).
- (2018): Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds. Dans: Construction and Building Materials, v. 170 (mai 2018).
- (2019): Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials. Dans: Construction and Building Materials, v. 200 (mars 2019).
- (2011): In situ continuously monitoring the early age microstructure evolution of cementitious materials using ultrasonic measurement. Dans: Construction and Building Materials, v. 25, n. 10 (octobre 2011).
- (2012): Investigation of the influence of curing temperature and silica fume content on setting and hardening process of the blended cement paste by an improved ultrasonic apparatus. Dans: Construction and Building Materials, v. 33 (août 2012).
- (2015): Material characteristics of ancient Chinese lime binder and experimental reproductions with organic admixtures. Dans: Construction and Building Materials, v. 84 (juin 2015).
- (2018): Hydration kinetics, pore structure, 3D network calcium silicate hydrate, and mechanical behavior of graphene oxide reinforced cement composites. Dans: Construction and Building Materials, v. 190 (novembre 2018).
Structurae coopère avec
