Yunsheng Zhang 
- (2024): Clinkerization of carbonatable belite–melilite clinker using solid waste at low temperature. Dans: Construction and Building Materials, v. 418 (mars 2024).
- (2024): Experimental study on eco-friendly one-part alkali-activated slag-fly ash-lime composites under CO2 environment: Reaction mechanism and carbon capture capacity. Dans: Construction and Building Materials, v. 421 (mars 2024).
- (2024): Corrosion characteristics of basalt-polypropylene hybrid fiber concrete under the compound salt and drying-wetting cycles. Dans: Construction and Building Materials, v. 419 (mars 2024).
- (2024): Ethylene Vinyl Acetate Copolymer Emulsion-Modified Alkali-Activated Slag Repair Material: Mechanical Strength and Durability Linked to Microstructural Properties. Dans: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (juillet 2024).
- (2023): Early-age performance and mechanism of magnesium oxychloride cement mortar mixed with highland barley straw ash. Dans: Construction and Building Materials, v. 401 (octobre 2023).
- (2023): Dynamic mechanical properties and constitutive model of specified density concrete reinforced by waste incineration tailings. Dans: Construction and Building Materials, v. 371 (mars 2023).
- (2023): Comparative study on material properties of ancient fired clay bricks of China. Dans: Case Studies in Construction Materials, v. 19 (décembre 2023).
- (2023): 3D Printed concrete with coarse aggregates: Built‒in‒Stirrup permanent concrete formwork for reinforced columns. Dans: Journal of Building Engineering, v. 70 (juillet 2023).
- (2018): Application of organic- and nanoparticle-modified foams in foamed concrete: Reinforcement and stabilization mechanisms. Dans: Cement and Concrete Research, v. 106 (avril 2018).
- (2023): Degradation of mortar fully buried in saline soil containing sodium sulfate or magnesium sulfate. Dans: Construction and Building Materials, v. 369 (mars 2023).
- (2023): Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials. Dans: Construction and Building Materials, v. 363 (janvier 2023).
- (2021): Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance. Dans: Construction and Building Materials, v. 296 (août 2021).
- (2021): Analyzing the filler and activity effect of fly ash and slag on the early hydration of blended cement based on calorimetric test. Dans: Construction and Building Materials, v. 276 (mars 2021).
- (2022): Chloride diffusion behavior and microstructure of basalt-polypropylene hybrid fiber reinforced concrete in salt spray environment. Dans: Construction and Building Materials, v. 324 (mars 2022).
- (2021): Experimental and Simulation Study of Water Absorption in Unsaturated Concrete. Dans: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (décembre 2021).
- (2021): Atmospheric drying preparation and microstructure characterization of fly ash aerogel thermal insulation material with superhydrophobic. Dans: Construction and Building Materials, v. 303 (octobre 2021).
- (2020): Experimental and molecular dynamics studies on the durability of sustainable cement-based composites: Reinforced by graphene. Dans: Construction and Building Materials, v. 257 (octobre 2020).
- (2021): Analytical Equations and Numerical Simulation Describing the Pore and Solid Phase Distributions of Interfacial Transition Zones in Cement-Based Materials. Dans: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (mars 2021).
- (2020): Damage evolution of cement mortar with high volume slag exposed to sulfate attack. Dans: Construction and Building Materials, v. 247 (juin 2020).
- (2020): A comparable study on the deterioration of limestone powder blended cement under sodium sulfate and magnesium sulfate attack at a low temperature. Dans: Construction and Building Materials, v. 243 (mai 2020).
- (2020): Effects of fly ash on Portland limestone cement under sulfate attack at low temperature. Dans: Magazine of Concrete Research, v. 72, n. 3 (février 2020).
- (2018): Biomimetic superhydrophobic surface of concrete: Topographic and chemical modification assembly by direct spray. Dans: Construction and Building Materials, v. 181 (août 2018).
- (2018): Fresh properties of a novel 3D printing concrete ink. Dans: Construction and Building Materials, v. 174 (juin 2018).
- (2018): Experimental study on the performance of lime-based low carbon cementitious materials. Dans: Construction and Building Materials, v. 168 (avril 2018).
- (2019): Conservation of disappearing traditional manufacturing process for Chinese grey brick: Field survey and laboratory study. Dans: Construction and Building Materials, v. 212 (juillet 2019).
- (2013): An analytical model for determining the relative electrical resistivity of cement paste and C–S–H gel. Dans: Construction and Building Materials, v. 48 (novembre 2013).
- (2014): Continuous tracking of the relationship between resistivity and pore structure of cement pastes. Dans: Construction and Building Materials, v. 53 (février 2014).
- (2016): Corrosion behavior of steel submitted to chloride and sulphate ions in simulated concrete pore solution. Dans: Construction and Building Materials, v. 115 (juillet 2016).
- (2008): Carbonation depth prediction of fly ash concrete subjected to 2-and 3-dimensional CO2 attack. Dans: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 4 (octobre 2008).
- (2008): Cracking resistance performance of super vertical-distance pumped SFRC. Dans: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 2 (mai 2008).
Structurae coopère avec
