0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

B. W. Schafer ORCID

La bibliographie suivante contient toutes les publications répertoriées dans la base de données qui sont reliées à ce nom en tant qu'auteur, éditeur ou collaborateur.

  1. Schafer, B. W. / Glauz, R. S. / Chen, H. (2023): Revision of ASCE 8 - Design of cold-formed stainless steel structural members. Dans: Journal of Constructional Steel Research, v. 208 (septembre 2023).

    https://doi.org/10.1016/j.jcsr.2023.107986

  2. Yuan, H. X. / Gao, J. D. / Theofanous, M. / Yang, L. / Schafer, B. W. (2020): Initial stiffness and plastic resistance of bolted stainless steel T-stubs in tension. Dans: Journal of Constructional Steel Research, v. 173 (octobre 2020).

    https://doi.org/10.1016/j.jcsr.2020.106239

  3. Moen, Cristopher D. / Igusa, Takeru / Schafer, B. W. (2008): Prediction of residual stresses and strains in cold-formed steel members. Dans: Thin-Walled Structures, v. 46, n. 11 (novembre 2008).

    https://doi.org/10.1016/j.tws.2008.02.002

  4. Vieira, L. C. M. / Malite, M. / Schafer, B. W. (2010): Simplified models for cross-section stress demands on C-section purlins in uplift. Dans: Thin-Walled Structures, v. 48, n. 1 (janvier 2010).

    https://doi.org/10.1016/j.tws.2009.07.009

  5. Zeinoddini, V. M. / Schafer, B. W. (2012): Simulation of geometric imperfections in cold-formed steel members using spectral representation approach. Dans: Thin-Walled Structures, v. 60 (novembre 2012).

    https://doi.org/10.1016/j.tws.2012.07.001

  6. Li, Z. / Ádány, S. / Schafer, B. W. (2013): Modal identification for shell finite element models of thin-walled members in nonlinear collapse analysis. Dans: Thin-Walled Structures, v. 67 (juin 2013).

    https://doi.org/10.1016/j.tws.2013.01.019

  7. Amouzegar, H. / Schafer, B. W. / Tootkaboni, M. (2016): An incremental numerical method for calculation of residual stresses and strains in cold-formed steel members. Dans: Thin-Walled Structures, v. 106 (septembre 2016).

    https://doi.org/10.1016/j.tws.2016.03.019

  8. Schafer, B. W. / Graham-Brady, L. (2006): Stochastic Post-buckling of Frames Using Koiter's Method. Dans: International Journal of Structural Stability and Dynamics, v. 6, n. 3 (septembre 2006).

    https://doi.org/10.1142/s0219455406001976

  9. Schafer, B. W. (2008): Review: The Direct Strength Method of cold-formed steel member design. Dans: Journal of Constructional Steel Research, v. 64, n. 7-8 (juillet 2008).

    https://doi.org/10.1016/j.jcsr.2008.01.022

  10. Smith, B. H. / Szyniszewski, S. / Hajjar, J. F. / Schafer, B. W. / Arwade, S. R. (2012): Steel foam for structures: A review of applications, manufacturing and material properties. Dans: Journal of Constructional Steel Research, v. 71 (avril 2012).

    https://doi.org/10.1016/j.jcsr.2011.10.028

  11. Peterman, K. D. / Nakata, N. / Schafer, B. W. (2014): Hysteretic characterization of cold-formed steel stud-to-sheathing connections. Dans: Journal of Constructional Steel Research, v. 101 (octobre 2014).

    https://doi.org/10.1016/j.jcsr.2014.05.019

  12. Liu, P. / Peterman, K. D. / Schafer, B. W. (2014): Impact of construction details on OSB-sheathed cold-formed steel framed shear walls. Dans: Journal of Constructional Steel Research, v. 101 (octobre 2014).

    https://doi.org/10.1016/j.jcsr.2014.05.003

  13. Mirzaei, A. / Sangree, R. H. / Velchev, K. / Comeau, G. / Balh, N. / Rogers, C. A. / Schafer, B. W. (2015): Seismic capacity-based design of narrow strap-braced cold-formed steel walls. Dans: Journal of Constructional Steel Research, v. 115 (décembre 2015).

    https://doi.org/10.1016/j.jcsr.2015.08.023

  14. Meimand, V. Z. / Schafer, B. W. (2014): Impact of load combinations on structural reliability determined from testing cold-formed steel components. Dans: Structural Safety, v. 48 (mai 2014).

    https://doi.org/10.1016/j.strusafe.2013.10.006

  15. Schafer, B. W. / Bajpai, P. (2005): Stability degradation and redundancy in damaged structures. Dans: Engineering Structures, v. 27, n. 11 (septembre 2005).

    https://doi.org/10.1016/j.engstruct.2005.05.012

  16. Shama, A. A. / Zarghamee, M. S. / Ojdrovic, R. P. / Schafer, B. W. (2003): Seismic damage evaluation of a steel building using stress triaxiality. Dans: Engineering Structures, v. 25, n. 3 (février 2003).

    https://doi.org/10.1016/s0141-0296(02)00149-9

  17. Schafer, B. W. / Peköz, T. (1999): Laterally Braced Cold-Formed Steel Flexural Members with Edge Stiffened Flanges. Dans: Journal of Structural Engineering (ASCE), v. 125, n. 2 (février 1999).

    https://doi.org/10.1061/(asce)0733-9445(1999)125:2(118)

  18. Peterman, K. D. / Schafer, B. W. (2014): Sheathed Cold-Formed Steel Studs under Axial and Lateral Load. Dans: Journal of Structural Engineering (ASCE), v. 140, n. 10 (octobre 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0000966

  19. Schafer, B. W. / Ojdrovic, R. P. / Zarghamee, M. S. (2000): Triaxiality and Fracture of Steel Moment Connections. Dans: Journal of Structural Engineering (ASCE), v. 126, n. 10 (octobre 2000).

    https://doi.org/10.1061/(asce)0733-9445(2000)126:10(1131)

  20. Bian, G. / Chatterjee, A. / Buonopane, S. G. / Arwade, S. R. / Moen, C. D. / Schafer, B. W. (2017): Reliability of cold-formed steel framed shear walls as impacted by variability in fastener response. Dans: Engineering Structures, v. 142 (juillet 2017).

    https://doi.org/10.1016/j.engstruct.2017.03.072

  21. Schafer, B. W. (2002): Local, Distortional, and Euler Buckling of Thin-Walled Columns. Dans: Journal of Structural Engineering (ASCE), v. 128, n. 3 (mars 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:3(289)

  22. Schafer, B. W. (2002): Three Books for Cold-Formed Steel Design. Dans: Journal of Structural Engineering (ASCE), v. 128, n. 11 (novembre 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:11(1490)

  23. Shifferaw, Yared / Schafer, B. W. (2012): Inelastic Bending Capacity of Cold-Formed Steel Members. Dans: Journal of Structural Engineering (ASCE), v. 138, n. 4 (avril 2012).

    https://doi.org/10.1061/(asce)st.1943-541x.0000469

  24. Buonopane, S. G. / Schafer, B. W. (2006): Reliability of Steel Frames Designed with Advanced Analysis. Dans: Journal of Structural Engineering (ASCE), v. 132, n. 2 (février 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:2(267)

  25. Schafer, B. W. / Ayhan, D. / Leng, J. / Liu, P. / Padilla-Llano, D. / Peterman, K. D. / Stehman, M. / Buonopane, S. G. / Eatherton, M. / Madsen, R. / Manley, B. / Moen, C. D. / Nakata, N. / Rogers, C. / Yu, C. (2016): Seismic Response and Engineering of Cold-formed Steel Framed Buildings. Dans: Structures, v. 8 (novembre 2016).

    https://doi.org/10.1016/j.istruc.2016.05.009

Rechercher une publication...

Disponible seulement avec
Mon Structurae

Texte intégral
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine