Structures - mai 2023

Publié:	mai 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Harris, Muhammad / Raza, Ali / Potgieter, Johan / Imdad, Aaqib / Rimašauskienė, Rūta / Arif, Khalid Mahmood	3D printed biodegradable polymer reinforced concrete with high structural stability	1609-1621
Bozyigit, Baran / Bozyiğit, İrem / Prendergast, Luke J.	Analytical approach for seismic analysis of onshore wind turbines considering soil-structure interaction	226-241
Jain, Monika / Khapre, Rajendra	Analytical investigation and experimental validation of anchorage zone to improve bursting force equation for post-tensioned concrete members	303-310
Li, Zhengqi	Analytical study on influence of subsurface voids on moment capacity of singly reinforced concrete beam – Inspired by a project case study	1821-1832
Zhu, Zhengrong / Zhou, Yun / Tan, Zhongkun / He, Hui / Zhou, Xiaofeng	Application of tuned viscous mass damper isolation systems for equipment-induced vibration control of industrial buildings	1934-1943
Gouda, Ahmed / ElSayed, Mostafa / Salem, Hamed / Attia, Walid / Elansary, Ahmed	Applied element modelling of unreinforced and reinforced concrete masonry walls under blast loading	828-845
Zhou, Tonglai / Li, Shuang / Fu, Zhipeng / Dong, Changsong	Assessment of contact interface on seismic response of tunnels by the modified response acceleration method	1384-1401
Schanck, Andrew / Davids, William G. / Pinkham, Jon / Berube, Keith	Assessment of web shear stresses and shear capacity of FRP composite tub girders for highway bridges	880-894
Lu, Linhan / Zhang, Tianhe / Liang, Tao / Ren, Qingxin	Axial compressive behavior of circular concrete-filled steel tube stub columns with steel slag coarse aggregate	1893-1905
Ran, Jinlin / Li, Tingchun / Wang, Hongshan / Zhu, Qingwen / Zhang, Hao / Du, Yiteng / Li, Weiteng	Behavior and design of circular concrete columns strengthened with textile-reinforced mortar subjected to eccentric compression	242-257
Liu, Zhong-Hua / Shu, Gan-Ping / Zhu, Hao / Qin, Ying	Behavior of double-skin truss-reinforced composite walls under eccentric compression	718-733
Chen, Hongbing / Zeng, Jiajin / Zhao, He / Liu, Xiaogang	Bond-slip effect in novel steel box-concrete composite structures part Ⅰ: Short-term loading	1450-1460
Ren, Yongan / Huo, Ruili / Zhou, Ding	Buckling analysis of non-uniform Timoshenko columns under localised fire	1245-1256
Wang, Zhanwen / Chen, Jianwei / Zhang, Rui	Calculation method for the interface contact stress of steel tube-to-sleeve grouted connections subjected to bending moments	1095-1108
Palagala, V. Y. / Bhanushali, J. D. / Nithyadharan, M.	Characterization studies on calcium silicate boards and fibre cement boards used as sheathing in light gauge steel framed systems	684-706
Miao, Xinwei / Huang, Wei / Quan, Wenli / An, Yongjiannan / Zhang, Jiarui	Comparative study on the seismic behaviour of assembled composite walls with vertical joint rigid connections and ductility connections	1553-1563
Nguyen, Thanh-Hung / Nguyen, Tan / Truong, Tam T. / Doan, Dinh Thien Vuong / Tran, Duc-Hoc	Corrosion effect on bond behavior between rebar and concrete using Bayesian regularized feed-forward neural network	1525-1538
Liu, Yifeng / Cai, Honghao / Liu, Xiaoguang / Zhao, Junxian / Zhang, Chuntao	Cyclic performance of fully assembled joints between H-Beam and CFST shear wall	1655-1669
Nick, Hooman / Ashrafpoor, Asgar / Aziminejad, Armin	Damage identification in steel frames using dual-criteria vibration-based damage detection method and artificial neural network	1833-1851
Cakiroglu, Celal / Islam, Kamrul / Bekdaş, Gebrail / Nehdi, Moncef L.	Data-driven ensemble learning approach for optimal design of cantilever soldier pile retaining walls	1268-1280
Abu-Salma, Deema / Vollum, Robert L. / Macorini, Lorenzo	Derivation of shear enhancement factor β used in FprEN1992 to calculate design shear force at corner columns of flat slabs	602-614
Laudage, Steven / Guenther, Ethan / Siegmund, Thomas	Design and analysis of a lightweight beam-type topologically interlocked material system	1402-1413
Qiu, Tong / Zhang, Jiqing / Chen, Xiangsheng / Xu, Zhenyan / Su, Dong / Song, Ran / Cui, Tao	Design and testing of multischeme horizontal joints for prefabricated two-walls-in-one diaphragm wall	1354-1371
Caprani, Colin C. / Ngan, Jun Wei / Ahmadi, Ehsan / Zhang, Shao Hua / Bai, Yu / Satasivam, Sindu	Design, construction and performance of the Monash pultruded glass fibre-reinforced polymer footbridge	970-984
Zhang, Wen-Ming / Zhang, Xiao-yi / Tian, Gen-min	Determining the hanger force of the suspension bridge with short extended spans: An analytical algorithm	1645-1654
Farahpour, Hengameh / Hejazi, Farzad	Development of integrated semi-active adaptive vibration control system for bridges subjected to traffic loads	1773-1794
Peng, Fei / Deng, Jidong / Fang, Zhi / Tang, Zilong	Ductility evaluation and flexural failure mode recognition of reinforced Ultra-High performance concrete flexural members	1881-1892
Khademi, Mohsen / Tehranizadeh, Mohsen / Shirkhani, Amir / Hajirasouliha, Iman	Earthquake-induced loss assessment of steel dual concentrically braced structures subjected to near-field ground motions	1123-1139
Han, Guohui / Su, Chao / Wang, Wenjun / Yu, Hui	Effect of incident angle of P-wave on seismic response of underground cavern	1757-1772
Dadkhah, Hamed / Mohebbi, Mohtasham	Effect of stand-off distance on blast fragility of steel moment-resisting buildings	1694-1705
Li, Chuanjing / Aoude, Hassan	Effect of UHPC jacketing on the shear and flexural behaviour of high-strength concrete beams	1972-1996
Tang, Jiachang / Lei, Yong / Zhang, Taolin / Yao, Qishui / Fu, Chunming / Zhan, Lina / Mi, Chengji	An effective nonlinear interval sequential quadratic programming method for uncertain inverse problems	615-627
Ravanbakhshian Habibabadi, Mahdi / Izadinia, Mohsen / Tajmir Riahi, Hossein / Hasan Meisami, Mohammad	Effects of geometric characteristics of U-shaped flexural plates on their cyclic performance	351-371
Vu, Quoc-Anh / Cao, Truong-Son / Nguyen, Thi-Thanh-Thuy / Nguyen, Huu-Hue / Truong, Viet-Hung / Ha, Manh-Hung	An efficient differential evolution-based method for optimization of steel frame structures using direct analysis	67-78
Shamsaddinlou, Amir / Shirgir, Sina / Hadidi, Ali / Farahmand Azar, Bahman	An efficient reliability-based design of TMD & MTMD in nonlinear structures under uncertainty	258-274
Ou, Jiajia / Long, Weiguo / Jin, Han / Li, Zheng / Sun, Xiaofeng / He, Minjuan	Embedment strength of dowel-type fasteners for the case of cross-laminated timber plane side insertion	1257-1267
Zhang, Shangrong / He, Jiaman / Liu, Liangkun / Li, Shihao / Tan, Ping	Energy research of three-adjacent structures connected by Kelvin-type dampers based on power flow	1670-1683
Whiteley, J. / Liew, A. / He, L. / Gilbert, M.	Engineering design of optimized reinforced concrete floor grillages	1292-1304
Majidi, Noorollah / Tajmir Riahi, Hossein / Mahdi Zandi, Sayed	Evaluating the performance of different mother wavelet functions for down-sampling of earthquake records	846-879
Sun, Bochao / Li, Peichen / Wang, Dianchao / Ye, Jun / Liu, Gaoyang / Zhao, Weijian	Evaluation of mechanical properties and anisotropy of 3D printed concrete at different temperatures	391-401
Li, Zhixing / Chen, Wensu / Hao, Hong / Xu, Cheng / Pham, Thong M.	Experimental and analytical study on structural performance of reinforced lightweight geopolymer composites panels	1219-1229
Bolina, Fabricio L. / Schallenberger, Matheus / Carvalho, Hermes	Experimental and numerical evaluation of RC ribbed slabs in fire conditions	747-759
Higgoda, Thumitha Mandula / Elchalakani, Mohamed / Kimiaei, Mehrdad / Wittek, Adam / Yang, Bo	Experimental and numerical investigation on the effect of concrete infill in pultruded GFRP CHS intermediate and long columns under axial and eccentric compression	137-157
Liu, Shen / Feng, Ruoqiang / Zhong, Yuting	Experimental and numerical studies of screwed connections with hot-rolled steel plate and cold-formed steel sheet	311-319
Liu, Jianfei / An, Yi / Cheng, Xin / Lei, Honggang	Experimental and numerical studies on seismic behavior of new cross square hollow column-truss beam connections	657-668
Zhang, Xiaowei / Rong, Xian / Shi, Xiaona / Zhang, Jianxin	Experimental evaluation on the seismic performance of high-strength reinforcement beam-column joints with different parameters	1591-1608
Kaya, Serap Altın / Yalcin, Cem / Kaya, Osman	Experimental investigation of full-scale reinforced concrete beams under reversed-cyclic pure torsion	734-746
Fu, Guoqiang / Quan, Yong / Gu, Ming / Huang, Peng	Experimental investigation of wind effects on a 282-meter-high tower with complex aerodynamic shapes based on a rigid model and multi-degree-of-freedom aeroelastic model	25-41
Gao, Danying / Luo, Feifei / Yan, Yongming / Tang, Jiyu / Yang, Lin	Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete	1205-1218
Zhang, Zejun / Liu, Yongjian / Liu, Jiang / Xin, Gongfeng / Long, Guanxu / Zhang, Tiantao	Experimental study and analysis for the long-term behavior of the steel–concrete composite girder bridge	1305-1327
Zhao, Tong-de / Li, Qing / Yu, Bing-bing / Huang, Chen / Gao, Zheng-Hua / Wang, Kai	Experimental study on dynamic mechanical properties of mortar-sandstone composite under impact load	1061-1070
Mary Williams, P. / Menon, Devdas / Prasad, A. Meher	Experimental study on long-term behavior of PSC beams	560-572
Huang, Xiangdong / Zeng, Zhiping / Wang, Di / Luo, Xinwei / Li, Ping / Wang, Weidong	Experimental study on the vibration reduction characteristics of the floating slab track for 160 km/h urban rail transit	1230-1244
White, R. E. / Macdonald, J. H. G. / Horseman, T. R. / Alexander, N. A.	Exploring interactions between a human rhythmic jumper and an oscillating structure using experimental force–displacement analysis	1172-1188
Trimech, Mahmoud / Annan, Charles Darwin / Walbridge, Scott / Maljaars, Johan	Fatigue behaviour of butt-lap friction stir welded joints used with aluminum bridge decks	1795-1805
Zhang, Shujia / Lei, Honggang / Zhou, Zichun / Wang, Guoqing / Qiu, Bin	Fatigue life analysis of high-strength bolts based on machine learning method and SHapley Additive exPlanations (SHAP) approach	275-287
Li, Qiyu / Xu, Congbai / Luo, Zhicheng / Huang, Fenghua / Zang, Xiangsheng / Zhang, Dachang	Fatigue performance of Q420C steel fillet-welded joints at low temperatures	1341-1353
Izadi, Amin / Teh, Lip H. / Ahmed, Aziz / Polak, Maria Anna	Finite element analysis of square FRP-concrete-steel columns under eccentric compression	79-90
Ban, Huiyong / Wei, Jiatian / Luo, Jiawei / Wang, Yuanqing	Flexural behaviour of deconstructable composite beams	669-683
Liu, Hao / Tang, Zhenyun / Chen, Yanjiang / Du, Xiuli	Frequency domain transfer function based multimodal design method for seismic mitigation of building structures	1539-1552
Gkantou, Michaela / Georgantzia, Evangelia / Kadhim, Abdullah / Kamaris, George S. / Sadique, Monower	Geopolymer concrete-filled aluminium alloy tubular cross-sections	528-543
Xu, Bo / Wang, Shida / Xia, Hui / Zhu, Zhenhao / Chen, Xudong	A global sensitivity analysis method for safety influencing factors of RCC dams based on ISSA-ELM-Sobol	288-302
Xiao, Lin / Wei, Xing / Zhao, Junming / Wu, Chentai	Hot spot stress concentration factor of CFST T/Y joints based on modified equivalent thickness	910-925
Kong, Qingzhao / He, Chang / Liao, Lijia / Xu, Jia / Yuan, Cheng	Hyperparameter optimization for interfacial bond strength prediction between fiber-reinforced polymer and concrete	573-601
Song, Dejun / Xue, Jianyang / Wu, Chenwei	Hysteretic behaviors of Pingshenke Dou-Gong brackets of ancient timber buildings under different loading directions	1944-1958
Zhou, Kang / Zhi, Lun-Hai / Wang, Jing-Feng / Hong, Xu / Xu, Kang / Shu, Zhen-Ru	An improved stochastic subspace modal identification method considering uncertainty quantification	1083-1094
Li, Yong / Li, Yanlong / Zhou, Binpeng / Wen, Lifeng / Liu, YunHe / Zhou, Heng / Li, Weimei	Influence of complex geological conditions on core arching of earth - rock dam	1564-1578
Liu, Xuchen / Li, Xiaojun / Li, Zaixian / Wang, Xiaohui / Zhang, Youjia / Wang Supervison, Ning	Influence of heavy concrete on seismic response of transfer and purging rooms of nuclear power plant	1372-1383
Karagöz Işleyen, Ümmü / Ghoroubi, Rahim / Mercimek, Ömer / Anil, Özgür / Erdem, R. Tuğrul	Investigation of impact behavior of glulam beam strengthened with CFRP	196-214
Bu, Liang-Tao / Hou, Qi / Zhou, Jing	Mechanical behaviour of H-shaped steel columns reinforced with bonded steel plates and anchor bolts	544-559
Liu, Jiatong / Peng, Quan / Li, Wei / Wang, Jiejun	Mechanical properties of BFRP-reinforced glued laminated wood hollow round column under eccentric pressure	1140-1152
Lin, Pengzhen / Hou, Shuailong / Wang, Yapeng	Mechanical properties of large-diameter semi-grouted sleeve connections for railway platform canopies	171-184
Truong, Quynh Chau / El Soueidy, Charbel-Pierre / Hawchar, Lara / Li, Yue / Bastidas-Arteaga, Emilio	Modelling two-dimensional chloride diffusion in repaired RC structures for sustainable maintenance management	895-909
Luo, Da / Li, Bing	Moment redistribution capacity of continuous RC beams with High-Strength steel reinforcement	13-24
Xu, Guoshan / Jiang, Yutong / Yang, Ge / Ning, Xizhan / Yu, Tianyu	Multi-axial material constitutive model updating based online numerical simulation method for seismic performance evaluation of shear wall structures	1153-1171
Wang, Zhangming / Zhang, Nan / Cheng, Qian	Multi-objective optimization-based reasonable finished state in long-span cable-stayed bridge considering counterweights	1497-1506
Joseph, Lakshmi / Chakravarthi, Eluri Kalyana / Sarath Kumar, P. / Jayanarayanan, Karingamanna / Mini, K. M.	Nano filler incorporated epoxy based natural hybrid fiber confinement of concrete systems: Effect of fiber layers and nano filler addition	320-331
Xue, Cheng / Li, Yanbin / Jiang, Dong / Fei, Qingguo	Nonlinear analysis of a typical nonlinear beam structure based on experimentally extracted dynamical characteristics	791-799
Wang, Lei / Xu, Hanying / Liu, Yaru	A novel dynamic load identification approach for multi-source uncertain structures based on the set-theoretical wavelet transform and layered noise reduction	91-104
Xie, Zilu / Qian, Zengzhen / Lu, Xianlong / Zhao, Ziye	Numerical analysis of circular-steel-tube with anchor-plates embedded in concrete-columns under uplift load	1742-1756
Wang, Guo-Jue / Jiang, Shi-Yong / Wang, Guo-Tao / Ingham, Jason M.	Numerical investigation of precast concrete frames with grouted sleeves and intermediate connections	1474-1496
Damghani, Mahdi / Matthews, Jason / Murphy, Adrian / Featherston, Carol	Numerical shape, thickness and stacking sequence optimisation and experimental study of hybrid composite plates under in-plane shear loading	372-390
Lu, Wei-Bo / Chen, Ming / Shi, Yu / Li, Bu-Shuan	Numerical simulation and specification provisions for cruciform cold-formed steel built-up columns	484-497
Dai, Xianghe / Yang, Jie / Zhou, Kan / Sheehan, Therese / Lam, Dennis	Numerical study of steel–concrete composite cellular beam using demountable shear connectors	1328-1340
Kong, Weiming / Yang, Shanglin / Wang, Shufei / Liu, Zhicheng / Zhang, Run / Zhong, Wei / Yao, Xiaohu	On dynamic response and damage evaluation of bridge piers under far-field explosion loads	985-1003
Oualid Mghazli, Mohamed / Zoubir, Zineb / Nait-Taour, Abdellah / Cherif, Seifeddine / Lamdouar, Nouzha / El Mankibi, Mohamed	Optimal sensor placement methodology of triaxial accelerometers using combined metaheuristic algorithms for structural health monitoring applications	1959-1971
Ni, Pinghe / Yin, Zhangyao / Han, Qiang / Du, Xiuli	Output-only structural identification with random decrement technique	55-66
Shen, Min-Hui / Chung, Kwok-Fai / Elghazouli, Ahmed Y.	Performance of stud shear connections under combined shear and pull-out forces	415-434
Dorri, Farshad / Hooman Ghasemi, Seyed. / Jalilkhani, Maysam	Performance-based system reliability analysis for steel moment frames	472-483
Parsa-Sharif, Mohammad / Nematzadeh, Mahdi / Bahrami, Amirreza	Post-fire load-reversed push-out performance of normal and lightweight concrete-filled steel tube columns: Experiments and predictions	1414-1437
Wang, Zhaoyao / Liang, Xingwen / Zhai, Tianwen	Predicting the flexural behavior of steel-PVA hybrid fiber reinforced cementitious composite	1189-1204
Gan, Yiping / Chen, Jun / Li, Yang / Xu, Zekun	Prediction of progressive collapse resistance of RC frames using deep and cross network model	800-813
Huang, Xinheng / Elchalakani, Mohamed / Yu, Peng / Lin, Rui / Nie, Yongchao / He, Sheng	Progressive collapse resistance of steel frame with beam to column transfer structure under a middle column-removal scenario	1-12
Xu, Wenlei / Miao, Hailin / Chen, Yuzhi	Pull-out behavior and damage assessment of core concrete of Full-scale prestressed High-strength hollow square piles	1906-1918
Feng, Yan / Xu, Ming / Xu, Yao / Tu, Liuhui / Chen, Sunyue	Pull-out strength of the glued-in joint in laminated bamboo structure	1052-1060
Li, Fuhai / Liu, Menghui / Liu, Gengyuan / Yang, Zongchi / Chen, Zhao / Wen, Tao / Cai, Chang	Pullout performance of headed anchor studs in Engineered Cementitious Composites (ECC) with Polyvinyl Alcohol fibers	1919-1933
Palanci, Mehmet / Demir, Ahmet / Kayhan, Ali Haydar	Quantifying the effect of amplitude scaling of real ground motions based on structural responses of vertically irregular and regular RC frames	105-123
Gao, Jing / Zhang, Xintao / Wang, Huakun / Chen, Longyun	Random corrosion characteristics of high strength steel wire after 18 years of service and the numerical reconstruction method	498-512
Xu, Yichi / Liu, Xiaoling / Wang, Bing / Yi, Xiyan	Residual mechanical properties of composite beams with PBL connectors under fatigue loads	185-195
Yahya Mohammed Almajhali, Khalil	Review on passive energy dissipation devices and techniques of installation for high rise building structures	1019-1029
Alsomiri, Mujahed / Liu, Zhao / Abadel, Aref A. / Li, Ming	Revision and development of material models of ultra-high performance concrete containing coarse aggregate and applications in structural-level flexural response predictions	332-350
Wei, Biao / Wan, Kecheng / Wang, Weihao / Hu, Zhangliang / Jiang, Lizhong / Li, Shanshan	Seismic isolation effect of a new type of friction pendulum bearing in high-speed railway girder bridge	776-790
Si, Mingfei / Wu, Yifeng / Xu, Hong / Li, Aiqun / Xu, Yubo / Lu, Song / Wang, Hao	The seismic performance evaluation of unbonded laminated rubber bearings with end rotation	926-935
Zhu, Hongping / Tang, Zian / Luo, Hao	Seismic performance of a base-isolated flexible liquid storage tank equipped with a novel rate-independent damping device	215-225
Alotta, Gioacchino / Biondo, Chiara / Giaralis, Agathoklis / Failla, Giuseppe	Seismic protection of land-based wind turbine towers using the tuned inerter damper	640-656
Wan, Feng / Zhou, Wangwang / Liu, Dewen / Huo, Yiran / Li, Hui / Luo, Xiaoxuan / Yao, Shunzhong	Seismic response of a stilted mid–story isolated structure in mountainous areas based on variable parameters soil–structure–interaction effect	707-717
Zhou, Xuhong / Huang, Xuesi / Liu, Jiepeng / Cheng, Guozhong / Wang, Lufeng / Hu, Jiahao / Liu, Pengkun / Chen, Y.Frank	Semi-automatic generation of shear wall structural models	42-54
Dang, Viet-Hung / Le-Nguyen, Khuong / Nguyen, Truong-Thang	Semi-supervised vibration-based structural health monitoring via deep graph learning and contrastive learning	158-170
Imjai, Thanongsak / Garcia, Reyes / Kim, Boksun / Hansapinyo, Chayanon / Sukontasukkul, Piti	Serviceability behaviour of FRP-reinforced slatted slabs made of high-content recycled aggregate concrete	1071-1082
Lu, Shasha / Zhang, Yanan / Zhao, Dongxu / Xu, Hong / Ma, Runbo / Li, Miaomiao	Shaking table test research on short-distance side-piercing bridge piles in tunnel structures	124-136
Jin, Liu / Miao, Liyue / Du, Xiuli	Shear failure of geometrically similar RC shear walls: Mesoscopic modellings and analysis	1109-1122
Campione, Giuseppe	Simplified calculation model for offshore wind tower founded on monopile member	962-969
Li, Zhejian / Wen, Yufeng / Wen, Xianlong / Hao, Hong / Chen, Wensu	Single and double-layered kirigami corrugated sandwich panels against impact loads	402-414
Saadatfar, Saman / Emami, Fereshteh / Khatibinia, Mohsen / Eliasi, Hussein	Sliding sector–based adaptive controller for seismic control of structures equipped with active tuned mass damper	1507-1524
Zheng, Kaikai / Yuan, Jian / Yang, Kangkang / Qu, Yiwen / Gao, Chengqiang / Shi, Jun	Static load identification of nonlinear structure based on internal force estimation exemplified by underground straight-wall arch structure	950-961
Li, Gongchan / Liu, Meng / Pan, Zheren / Lu, Limin / Yuan, Guanglin	Strengthening effect of steel plates on seismic behaviors of RC shear walls with various size post-openings	814-827
Gupta, Akshay / Meena, Gaurav Kumar / Singhal, Vaibhav	Strengthening of autoclaved aerated concrete (AAC) masonry wallettes with fabric reinforced cementitious matrix for in-plane shear and out-of-plane loads	1869-1880
Heydari, Pooria / Mostofinejad, Davood / Mostafaei, Hasan / Ahmadi, Hajar	Strengthening of deep RC coupling beams with FRP composites: A numerical study	435-454
Iqbal, S. M. / Hejazi, Farzad / Mafaileh, Ala M. A.	Strengthening of Reinforced Concrete slabs using macro and micro synthetic fibers	1579-1590
Shan, Yulin / Chen, Yuli / Zong, Zhouhong / Li, Jiaqi / Li, Zhuo / Xu, Yousheng	Structural performance of orthotropic Steel-Concrete continuous composite decks with larger U-ribs and PBL shear connectors	1030-1051
Lizhong, Jiang / Shaohui, Liu / Wangbao, Zhou / Jian, Yu / Xiang, Liu / Kang, Peng / Lingzhi, Zu	Study on power spectral density curves of track dynamic irregularity caused by earthquake-induced damage	1281-1291
Jiang, J. / Ye, M. / Chen, L. Y. / Zhu, Z. W. / Wu, M.	Study on static strength of Q690 built-up K-joints under axial loads	760-775
Sitong, Wei / Jinghua, Zhang / Chao, Zhao / Xueming, Wang / Qing, Sun	Study on the analytical model for load distribution of multiple-ring-stiffened tube-gusset joints considering ring stiffness	1852-1868
Guo, Shengqi / Wang, Mengfu	Study on the equivalent plastic hinge length of superimposed RC shear walls with embedded bracings	455-471
Zhang, Jinfeng / Zhu, Zixu / Zhu, Xueyan / Meng, Yichen / Chu, Weihong	Study on the influence of uneven settlement and small curve radius on metro train running safety and riding comfort	1806-1820
Song, Guoqing / Zhi, Xudong / Li, Zheng / Fan, Feng / Jin, Xiaofei	Study on the layout methods of stiffening rings for steel cooling towers	1438-1449
Tang, Ruo-Yang / Nie, Xin / Ding, Ran / Sun, Yun-Lun / Fan, Jian-Sheng	Tensile behaviour of transverse reinforcement with different connection methods in single steel-plate concrete composite structures	936-949
Li, Xiang / Liu, Jiepeng / Wang, Xuanding / Chen, Y. Frank	Test and design of eccentrically-loaded slender circular tubed columns filled with high-strength concrete and reinforcement	1461-1473
Chandrasekaran, Srinivasan / Shah, Bharat / Chauhan, Yogesh J.	Tether response of offshore Triceratops under hurricane conditions	513-527
Hashlamon, Ibrahim / Nikbakht, Ehsan	Theoretical and numerical investigation of bridge frequency identification employing an instrumented vehicle in stationary and moving states	1684-1693
Wang, Ruizheng / Ji, Wei / Li, Xitong / Peng, Kai / Peng, Chen / Wang, Changhao	Thermal load models for the static design of steel-concrete composite girders	1004-1018
Zhou, Peng / Wan, Shui / Wang, Xiao / Fu, Jundong / Li, Shuli	Topology optimization of the periodic pile barrier with initial stresses arranged in rectangular and equilateral triangular lattices	628-639
Elshazli, Mohamed T. / Ibrahim, Ahmed / Abdel-Rahim, Ahmed	Truck platooning impact on existing Bridges’ load ratings	1706-1721
Bisheh, Hossein	Vibration characteristics of smart laminated carbon nanotube-reinforced composite cylindrical shells resting on elastic foundations with open circuit	1622-1644
Gao, Danying / Ji, Dongdong / Gu, Zhiqiang / Yan, Huanhuan / Zhang, Yu	Workability and mechanical properties analysis of hybrid fibers reinforced self-compacting concrete incorporating recycled aggregates based on acoustic emission technique	1722-1741

Informations
sur cette fiche
IssueID
69374
Publié(e) le:
21.03.2023
Modifié(e) le:
21.03.2023

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - mai 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - mai 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.