Structures - août 2019

Publié:	août 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Rahmani, A. Y. / Bourahla, N. / Bento, R. / Badaoui, M.	Adaptive upper-bound pushover analysis for high-rise moment steel frames	912-923
Pachideh, Ghasem / Gholhaki, Majid / Daryan, Amir Saedi	Analyzing the damage index of steel plate shear walls using pushover analysis	437-451
Simonetti, Hélio Luiz / Almeida, Valério S. / Leitão, Vitor Manuel A. / de Assis das Neves, Francisco	Application of evolutionary structural optimization based on the boundary element method using initial stress fields	550-559
Bock, Marina / Theofanous, Marios / Dirar, Samir / Raybone, Paul	Assessment of web crippling design provisions for application to proprietary soldier beams	147-156
Lee, Adam D. / Alimanza, Jed A. / Shepherd, Paul / Evernden, Mark C.	Axial Rotation and Lateral Torsional Buckling of Extruded Aluminium Mullions in Curtain Wall Facades	658-675
Shaikh, Faiz Uddin Ahmed / Alishahi, Reza	Behaviour of CFRP wrapped RC square columns under eccentric compressive loading	309-323
Ataria, R. B. / Wang, Y. C.	Bending and shear behaviour of two layer beams with one layer of rubber recycled aggregate concrete in tension	214-225
Sridhar, Radhika / Prasad, D. Ravi	Damage assessment of functionally graded reinforced concrete beams using hybrid fiber engineered cementitious composites	832-847
Khan, Ayaz / Gupta, Rishi / Garg, Mohit	Determining material characteristics of "Rammed Earth" using Non-Destructive Test methods for structural design	399-410
Nagavinothini, R. / Chandrasekaran, S.	Dynamic analyses of offshore triceratops in ultra-deep waters under wind, wave, and current	279-289
Gümüş, Muhammed / Arslan, Abdussamet	Effect of fiber type and content on the flexural behavior of high strength concrete beams with low reinforcement ratios	1-10
Vakili, S. Ehsan / Homami, Peyman / Esfahani, M. Reza	Effect of fibers and hybrid fibers on the shear strength of lightweight concrete beams reinforced with GFRP bars	290-297
Tasri, Adek / Susilawati, Anita	Effect of material of post-cooling pipes on temperature and thermal stress in mass concrete	204-212
Mustafa, Maher Al-Tayeb / Hanafi, Ismail / Mahmoud, Rade / Tayeh, B. A.	Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation	519-526
Abd-Elhamed, M. K. / Owida, M. E.	Effect of stirrups densification on ultimate capacity of rectangular reinforced concrete columns	728-764
Shiravand, M. R. / Rasouli, M.	Effects of substructure mass participation on natural period of multi-column base isolated bridges	88-104
Sagadevan, R. / Rao, B. N.	Experimental and analytical investigation of punching shear capacity of biaxial voided slabs	340-352
Abed, Farid / El Refai, Ahmed / Abdalla, Suliman	Experimental and finite element investigation of the shear performance of BFRP-RC short beams	689-701
Yapıcı, Orhan / Gündüz, A. Necmettin / Aksoylar, Cenk	Experimental and numerical investigation of material non-linearity in steel elements under different loading protocols	74-87
Christoforou, Eftychios G. / Phocas, Marios C. / Matheou, Maria / Müller, Andreas	Experimental implementation of the 'effective 4-bar method' on a reconfigurable articulated structure	157-165
Newell, Shane / Goggins, Jamie	Experimental study of hybrid precast concrete lattice girder floor at construction stage	866-885
Huo, Jingsi / Zhang, Xiaofei / Yang, Jin / Xiao, Yan	Experimental study on dynamic behavior of CFRP-to-steel interface	465-475
Ardila-Giraldo, Oscar A. / Pujol, Santiago	Failure mechanisms of small-scale reinforced concrete beams impacted by soft missiles	620-634
Elchalakani, M. / Patel, V. I. / Karrech, A. / Hassanein, M. F. / Fawzia, S. / Yang, B.	Finite element simulation of circular short CFDST columns under axial compression	607-619
Pouladi, Pouya / Ronaldson, John / Clifton, G. Charles / Ingham, Jason M. / Wrzesien, Andrzej M. / Lim, James B. P.	Finite-element assisted design of eaves joint of cold-formed steel portal frames having single channel-sections	452-464
Hama, Sheelan Mahmoud / Mahmoud, Akram Shakir / Yassen, Mohamed Mahir	Flexural behavior of reinforced concrete beam incorporating waste glass powder	510-518
Conrad, Kyle / Phillips, Adam R.	Full scale testing and development of wood-steel composite shear walls	268-278
Russell, J. M. / Sagaseta, J. / Cormie, D. / Jones, A. E. K.	Historical review of prescriptive design rules for robustness after the collapse of Ronan Point	365-373
Kotoky, Needhi / Dutta, Anjan / Deb, Sajal K.	Hybrid testing for evaluation of seismic performance of highway bridge with pier made of HyFRC	848-865
Maheri, Mahmoud R. / Khajeheian, M. K. / Vatanpour, F.	In-plane seismic retrofitting of hollow concrete block masonry walls with RC layers	425-436
BaniAsad, E. / Dehestani, M.	Incorporation of corrosion and bond-slip effects in properties of reinforcing element embedded in concrete beams	105-115
Motwani, Prashant / Laskar, Arghadeep	Influence of excessive end slippage on transfer length of prestressing strands in PC members	676-688
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	Investigation on sheathing-fastener connection failures in cold-formed steel wall panels	176-188
Narendra, Perumalla V. R. / Prasad, Kartik / Krishna, Ede Hari / Kumar, Vikas / Singh, Konjengbam Darunkumar	Low-Cycle-Fatigue (LCF) behavior and cyclic plasticity modeling of E250A mild steel	594-606
Zampieri, Paolo / Amoroso, Marco / Pellegrino, Carlo	The masonry buttressed arch on spreading support	226-236
Sherman, Ryan J. / Collins, William N. / Connor, Robert J.	Material characterization of high-toughness steel	33-41
Achintha, Mithila / Balan, Bogdan	Mechanical prestressing of annealed glass beams using pretensioned GFRP: Characterisation and potentiality	11-19
Carrillo, Julian / Sánchez, Martha / Bojórquez, Edén	Minimum wall-area index for low-rise concrete housing	903-911
Dong, Minhao / Lokuge, Weena / Elchalakani, Mohamed / Karrech, Ali	Modelling glass fibre-reinforced polymer reinforced geopolymer concrete columns	813-821
van der Spuy, Pierre / Lenner, Roman / de Wet, Tertius / Caprani, Colin	Multiple lane reduction factors based on multiple lane weigh in motion data	543-549
Yang, Yaqiang / Fahmy, Mohamed F. M. / Cui, Jing / Pan, Zhihong / Shi, Jianzhe	Nonlinear behavior analysis of flexural strengthening of RC beams with NSM FRP laminates	374-384
Momeni, Mohammad / Hadianfard, Mohammad Ali / Bedon, Chiara / Baghlani, Abdolhossein	Numerical damage evaluation assessment of blast loaded steel columns with similar section properties	189-203
Roy, Krishanu / Lim, James B. P.	Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression	42-73
Saleh, Zein / Sheikh, M. Neaz / Remennikov, Alex M. / Basu, Abheek	Numerical investigations on the flexural behavior of GFRP-RC beams under monotonic loads	255-267
Jumaa, Ghazi Bahroz / Yousif, Ali Ramadhan	Numerical modeling of size effect in shear strength of FRP-reinforced concrete beams	237-254
Li, Zhejian / Chen, Wensu / Hao, Hong	Numerical study of blast mitigation performance of folded structure with foam infill	581-593
Nasrin, Sabreena / Ibrahim, Ahmed	Numerical study on the low-velocity impact response of ultra-high-performance fiber reinforced concrete beams	570-580
Akın, Emre	Open ground story in properly designed reinforced concrete frame buildings with shear walls	822-831
Girão Coelho, Ana M. / Lawson, R. Mark / Aggelopoulos, Eleftherios S.	Optimum use of composite structures for demountable construction	116-133
Saranya, P. / Nagarajan, Praveen / Shashikala, A. P.	Performance evaluation of geopolymer concrete beams under monotonic loading	560-569
Siam, Ahmad S. / Ezzeldin, Mohamed / El-Dakhakhni, Wael	Reliability of displacement capacity prediction models for reinforced concrete block shear walls	385-398
Shoaei, Parham / Mahsuli, Mojtaba	Reliability-based design of steel moment frame structures isolated by lead-rubber bearing systems	765-778
Graciano, Carlos / Loaiza, Nelson / Casanova, Euro	Resistance of slender austenitic stainless steel I- girders subjected to patch loading	924-934
Dehghani, Ayoub / Aslani, Farhad	A review on defects in steel offshore structures and developed strengthening techniques	635-657
Areiza-Hurtado, Mauricio / Aristizabal-Ochoa, J. Dario	Second-order analysis of a beam-column on elastic foundation partially restrained axially with initial deflections and semirigid connections	134-146
Attari, Nassereddine / Youcef, Youcef Si / Amziane, Sofiane	Seismic performance of reinforced concrete beam–column joint strengthening by frp sheets	353-364
Kumar, M. Suneel / Senthilkumar, R. / Sourabha, L.	Seismic performance of special concentric steel braced frames	166-175
Kabir, Mohammad Z. / Rezaifar, Omid	Shaking table examination on dynamic characteristics of a scaled down 4-story building constructed with 3D-panel system	411-424
Ahmed, Ghafur H. / Aziz, Omar Q.	Shear strength of joints in precast posttensioned segmental bridges during 1959–2019, review and analysis	527-542
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	Sheathing braced design of cold-formed steel structural members subjected to torsional buckling	489-509
Abdelrahman, A. H. A. / Du, Zuo-Lei / Liu, Yao-Peng / Chan, Siu-Lai	Stability design of single angle member using effective stress-strain method	298-308
Areiza-Hurtado, Mauricio / Vega-Posada, Carlos A. / Aristizabal-Ochoa, J. Dario	Stiffness matrix and loading vector of a two-layer Timoshenko composite beam	20-32
Hosseini, Alireza Sadat / Bahaari, Mohammad Reza / Lesani, Mohammad	Stress concentration factors in FRP-strengthened offshore steel tubular T-joints under various brace loadings	779-793
Tang, Gan / Yin, Lingfeng / Li, Zhanjie / Li, Yong / You, Liguo	Structural behaviors of bolted connections using laminated bamboo and steel plates	324-339
Alrebeh, Salih K. / Ekmekyapar, Talha	Structural performance of short concrete-filled steel tube columns with external and internal stiffening under axial compression	702-716
natesan, vijayakumar / Madhavan, Mahendrakumar	Structural performance on bolted sleeved connections between two CFS channel sections subjected to combined bending and shear	794-812
Govindan, Senthil kumar / Madhavan, Mahendrakumar	Study on cold-formed and hot rolled steel composite panel system	886-902
Yalciner, Hakan / Kumbasaroglu, Atila / Turan, Ahmet İhsan	Torsional behavior of reinforced concrete beams with corroded reinforcement	476-488
Keyvani, Sharare / Hoseini Vaez, Seyed Rohollah	Using DLO procedure to investigate the effect of openings on ultimate load and collapse pattern of slabs	717-727

Informations
sur cette fiche
IssueID
28267
Publié(e) le:
02.03.2019
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - août 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - août 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.