Procedia Structural Integrity - 2019

Publié:	2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Violano, Guido / Afferrante, Luciano	Adhesion of compliant spheres: an experimental investigation	251-258
Iob, Francesco / Cortese, Luca / Di Schino, Andrea / Coppola, Tommaso	Analysis of the micro-voids fraction in structural steels and its evolution during plastic deformation until failure	319-323
Fargione, Giovanna / Giudice, Fabio	An approach to design for environmental sustainability of additive manufactured metal components	758-763
Bonaiti, Luca / Concli, Franco / Gorla, Carlo / Rosa, Francesco	Bending fatigue behaviour of 17-4 PH gears produced via selective laser melting	764-774
Panciroli, Riccardo / Nerilli, Francesca	Bistable morphing panels through SMA actuation	593-600
Porziani, Stefano / Scarpitta, Francesco / Costa, Emiliano / Ferrante, Edoardo / Capacchione, Biagio / Rochette, Michel / Biancolini, Marco Evangelos	CAE - Update of CAE models on actual manufactured shapes	775-787
Nalli, Filippo / D’Onofrio, Andrea / Broggiato, Giovanni B. / Cortese, Luca	Calibration and prediction assessment of different ductile damage models on Ti6Al4V and 17-4PH additive manufactured alloys	810-819
Corapi, Domenico / Morettini, Giulia / Pascoletti, Giulia / Zitelli, Chiara	Characterization of a Polylactic acid (PLA) produced by Fused Deposition Modeling (FDM) technology	289-295
Giannella, Venanzio / Lombardi, Riccardo / Pisani, Matteo Maria / Federico, Luigi / Barbarino, Mattia / Citarella, Roberto	Characterization of equivalent acoustic sources to reproduce the acoustic field generated by engines on an aircraft fuselage	559-568
Vangi, Dario / Virga, Antonio / Gulino, Michelangelo-Santo	Combined activation of braking and steering for automated driving systems: adaptive intervention by injury risk-based criteria	423-436
Masoni, Riccardo / Manes, Andrea / Giglio, Marco	A comparison of state-based peridynamics and solid mesh to SPH conversion techniques to reproduce fragmentation of a ceramic tile subject to ballistic impact	40-52
Castellani, Francesco / Astolfi, Davide / Natili, Francesco / Senin, Nicola / Landi, Luca	Condition monitoring techniques for machine bearings in non-stationary operation	483-494
Mirone, Giuseppe / Barbagallo, Raffaele	Coupling of temperature and strain in thermal softening of a stainless steel at low and high strain rates	259-266
Zonfrillo, Giovanni / Pero, Francesco Del / Delogu, Massimo	Design of a device for stress corrosion testing in pressurized chambers	296-309
Bracali, Andrea / Baldanzini, Niccolo’ / Barbani, Daniele / Pierini, Marco / Maffe’, Francesco	Design of an after-market lower limb protector for scooters: preliminary estimation of effectiveness	448-454
Ridolfi, Maria Rita / Folgarait, Paolo / Battaglia, Valerio / Vela, Tiziana / Corapi, Domenico / Di Schino, Andrea	Development and calibration of a CFD-based model of the bed fusion SLM additive manufacturing process aimed at optimising laser parameters	370-380
Montani, Margherita / Capitani, Renzo / Annicchiarico, Claudio	Development of a brake by wire system design for car stability controls	137-154
Bergonzi, Lorenzo / Vettori, Matteo / Pirondi, Alessandro	Development of a miniaturized specimen to perform uniaxial tensile tests on high performance materials	213-224
Ma, Dayou / Manes, Andrea / Giglio, Marco	The effect of mesh morphologies on the mesoscale Finite Element modelling of woven composites	80-90
Napoli, Giuseppe / Pietro, Orlando Di / Stornelli, Giulia / Di Schino, Andrea	Effect of thermo-mechanical processes on microstructure evolution in austenitic stainless steels	110-117
Morettini, Giulia / Razavi, Seyed Mohammad Javad / Zucca, Guido	Effects of build orientation on fatigue behavior of Ti-6Al-4V as-built specimens produced by direct metal laser sintering	349-359
Scazzosi, Riccardo / Manes, Andrea / Giglio, Marco	An Enhanced Material Model for the Simulation of High-Velocity Impact on Fiber-Reinforced Composites	53-65
Barsanti, M. / Ciulli, E. / Forte, P. / Libraschi, M. / Strambi, M.	Error analysis in the determination of the dynamic coefficients of tilting pad journal bearings	988-996
Olivito, Renato S. / Scuro, Carmelo / Porzio, Saverio / Codispoti, Rosamaria	Experimental and analytical analysis on a masonry arch strengthened with basalt FRCM	310-318
Fiumarella, Dario / Boria, Simonetta / Belingardi, Giovanni / Scattina, Alessandro	Experimental and numerical analysis of a thermoplastic lamina for composite material	11-27
Castriota, Alessandro / Dattoma, Vito / Gambino, Benedetto / Nobile, Riccardo / Saponaro, Andrea	Experimental behavior of a CFRP damaged panel subjected to compressive stress	279-288
Marta, De Giorgi / Riccardo, Nobile / Andrea, Saponaro	Experimental evaluation of artificial defects using SMArt thermography	866-874
Perrella, Michele / Berardi, Valentino Paolo / Cricrì, Gabriele / Esposito, Renato	Experimental evaluation of the long-term creep deformations of epoxy resin	601-611
Concli, Franco / Gonzalez-Jimenez, Alvaro / Manes, Andrea / Giglio, Marco	Experimental testing and Numerical modelling of a Kevlar woven – epoxy matrix composite subjected to a punch test	3-10
Dattoma, Vito / Panella, Francesco / Pirinu, Alessandra / Castriota, Alessandro	Fatigue damage on CFRP plates under bending by thermographic and UT analysis, aided with FEM-DIC prediction	978-987
Giudice, Fabio / La Rosa, Guido / Fargione, Giovanna / Barbagallo, Raffaele	Fatigue limit assessment by energetic analyses in static and cyclic tensile tests	706-711
Meneghetti, Giovanni / Campagnolo, Alberto / Berto, Daniele / Pullin, Elena / Masaggia, Stefano	Fatigue properties of austempered ductile iron-to-steel dissimilar arc-welded joints	190-203
Belardi, Valerio G. / Fanelli, Pierluigi / Vivio, Francesco	FE analysis of single-bolt composite bolted joint by means of a simplified modeling technique	888-897
Fanelli, Pierluigi / Stefanini, Chiara / Facci, Andrea L. / Ubertini, Stefano	Fluid-structure interaction problem of a deformable lamina solved with an original OpenFOAM code	939-948
Maccioni, L. / Concli, F.	Fracture locus of a CORTEN steel: Finite Element calibration based on experimental results	738-745
Nicoletto, Gianni / Gallina, Luigi / Riva, Enrica	Influence of as-built surfaces on the fatigue behavior of AlSi10Mg parts obtained by laser powder bed fusion	381-389
Fanelli, Pierluigi / Mercuri, Alessandro / Trupiano, Simone / Vivio, Francesco / Falcucci, Giacomo / Jannelli, Elio	Live reconstruction of global loads on a powerboat using local strain FBG measurements	949-960
Cantone, Luciano / Toubol, Armand	Marathon2Operation, a Shift2Rail project for radio communication and simulation of train dynamics for distributed power within long trains	437-447
Sesana, Raffaella / Delprete, Cristiana / Sangermano, Marco	Mechanical behavior of macadamia nutshells	829-836
Castellani, Francesco / Natili, Francesco / Astolfi, Davide / Cianetti, Filippo	Mechanical behaviour of wind turbines operating above design conditions	495-509
Ciardiello, Raffaele	Mechanical characterization and separation tests of a thermoplastic reinforced adhesive used for automotive applications	155-166
Collini, Luca / Pirondi, Alessandro	Microstructure-based RVE modeling of the failure behavior and LCF resistance of ductile cast iron	324-336
Gonzalez-Jimenez, Alvaro / Manes, Andrea / Beligni, Alessio / Dziendzikowski, Michał / Sbarufatti, Claudio / Giglio, Marco	Modelling and Experimental Testing of Thick CFRP Composites Subjected to Low Velocity Impacts	101-109
Vergori, Elena / Yu, Yifei	Monitoring of Li-ion cells with distributed fibre optic sensors	233-239
Bosso, Nicola / Gugliotta, Antonio / Magelli, Matteo / Zampieri, Nicolò	Monitoring of railway freight vehicles using onboard systems	692-705
Pascoletti, Giulia / Catelani, Daniele / Conti, Paolo / Cianetti, Filippo / Zanetti, Elisabetta M.	A multibody simulation of a human fall: model creation and validation	337-348
Groth, Corrado / Chiappa, Andrea / Porziani, Stefano / Biancolini, Marco E. / Jacoboni, Emanuele / Serioli, Elisa / Mastroddi, Franco	Multiphysics numerical investigation on the aeroelastic stability of a Le Mans Prototype car	875-887
Guglielmino, Eugenio / Risitano, Giacomo / Santonocito, Dario	A new approach to the analysis of fatigue parameters by thermal variations during tensile tests on steel	651-657
Barile, Claudia / Casavola, Caterina / Pappalettera, Giovanni / Paramsamy Kannan, Vimalathithan	Novel method of utilizing Acoustic Emission Parameters for Damage Characterization in Innovative Materials	636-650
Caputo, Francesco / Manzo, Mario / Perfetto, Donato / De Luca, Alessandro / Palma, Luigi Di / Chiariello, Antonio / Di Caprio, Francesco	Numerical Drop Test of a Full Composite Fuselage Section Having Two Components of Velocity	788-799
Braccesi, Claudio / Cianetti, Filippo / Ferri, Alberto	Numerical evaluation of internal heat generation of roller coaster polyurethane wheels	612-624
Colombo, Chiara / Ceresetti, Andrea / Dall’Acqua, Stefano / Vergani, Laura	Numerical investigation of wire-clamp contact for a drawing machine	225-232
Greco, A. / De Luca, A. / Lamanna, G. / Sepe, R.	Numerical Investigation on the Influence of Tightening in Bolted Joints	746-757
De Luca, Alessandro / Greco, Alessandro / Mazza, Paolo / Caputo, Francesco	Numerical investigation on the residual stresses in welded T-joints made of dissimilar materials	800-809
Cantone, Luciano / Arcidiacono, Gabriele	Numerical model for distributors of railway vehicles equipped with composite blocks	820-828
Beretta, Lorenzo / Marotta, Emanuele / Salvini, Pietro	Optical Method to measure mesh tensioning	267-278
Porziani, Stefano / Groth, Corrado / Mancini, Luca / Cenni, Riccardo / Cova, Matteo / Biancolini, Marco Evangelos	Optimisation of industrial parts by mesh morphing enabled automatic shape sculpting	724-737
Trupiano, Simone / Belardi, Valerio G. / Fanelli, Pierluigi / Vivio, Francesco / Gaetani, Luca	An original FE modelling of a longitudinal multi-passes seam welding	852-865
Maurizi, Marco / Cianetti, Filippo / Slavič, Janko / Zucca, Guido / Palmieri, Massimiliano	Piezoresistive dynamic simulations of FDM 3D-Printed embedded strain sensors: a new modal approach	390-397
Nisi, Jacopo De / Pozzi, Fabio / Folgarait, Paolo / Ceselin, Gabriele / Ronci, Mirco	Precipitation hardening stainless steel produced by powder bed fusion: influence of positioning and heat treatment	541-558
Pallacci, Thomas / Baldanzini, Niccolò / Barbani, Daniele / Pierini, Marco	Preliminary effectiveness assessment of an airbag-based device for riders’ leg protection in side impacts	240-250
Certosini, Cesare / Papini, Luca / Capitani, Renzo / Annicchiarico, Claudio	Preliminary study for motion sickness reduction in autonomous vehicles: an MPC approach	127-136
Bruzzone, Fabio / Maggi, Tommaso / Marcellini, Claudio / Rosso, Carlo / Delprete, Cristiana	Proposal of a novel approach for 3D tooth contact analysis and calculation of the static transmission error in loaded gears	178-189
Bruzzone, Fabio / Delprete, Cristiana / Rosso, Carlo	A proposal of a unique formula for computing compliance in bolted joints	167-177
Dattoma, Vito / Nobile, Riccardo / Panella, Francesco Willem / Saponaro, Andrea	Real-time monitoring of damage evolution by nonlinear ultrasonic technique	583-592
Battiato, G. / Firrone, C. M.	Reduced order modeling of large contact interfaces to calculate the non-linear response of frictionally damped structures	837-851
Berzi, Lorenzo / Dattilo, Caterina Antonia / Pero, Francesco Del / Delogu, Massimo / Gonzalez, Manuel Ignacio	Reduced use of rare earth elements for permanent magnet generators: preliminary results from NEOHIRE project	961-977
D’Addio, Vincenzo / Forte, Paola / Frendo, Francesco / Squarcini, Raffaele	Rotordynamic analysis of a centrifugal pump for automotive applications	510-525
Loi, Gabriela / Porcu, Maria Cristina / Pieczonka, Lukasz / Staszewski, Wieslaw Jerzy / Aymerich, Francesco	Scaling Subtraction Method for Damage Detection in Composite Beams	118-126
Cova, Matteo / Livieri, Paolo / Rizzoni, Raffaella / Tovo, Roberto	A simplified multiscale model of degenerate graphite clusters in grey cast iron	625-635
Braccesi, Claudio / Cianetti, Filippo / Goracci, Leonardo / Palmieri, Massimiliano	Sine-Sweep qualification test for engine components: The choice of simulation technique	360-369
Zonfrillo, Giovanni / Gulino, Michelangelo-Santo	Statistical evaluation of the softening or hardening behaviour of metallic materials	470-482
Pirondi, Alessandro / Gandhi, Yogesh / Collini, Luca	Strategies for modelling and optimization of bi-stable composite laminates actuated by embedded Shape Memory Alloy wires	455-469
Berzi, Lorenzo / Baldanzini, Niccolò / Barbani, Daniele / Barbieri, Riccardo / Locorotondo, Edoardo / Pierini, Marco / Pugi, Luca / Alessandrini, Adriano / Cignini, Fabio / Ortenzi, Fernando / Genovese, Antonino	Structural and energy storage retrofit of an electric bus for high-power flash recharge	408-422
Chiappa, Andrea / Zenobio, Aldo Di / Giorgetti, Francesco / Groth, Corrado / Muzzi, Luigi / Porziani, Stefano / Turtù, Simonetta / Regine, Domenico / Biancolini, Marco Evangelos	Structural assessment of TF superconducting magnet of the DTT device	898-905
Fanelli, Pierluigi / Trupiano, Simone / Belardi, Valerio Gioachino / Vivio, Francesco / Jannelli, Elio	Structural health monitoring algorithm application to a powerboat model impacting on water surface	926-938
Mocera, Francesco	Study of a Hardware-In-the-Loop bench for an electrified working vehicle	712-723
Fiorentini, Federica / Curcio, Pellegrino / Armentani, Enrico / Rosso, Carlo / Baldissera, Paolo	Study of two alternative cooling systems of a mold insert used in die casting process of light alloy components	569-582
Bosso, Nicola / Gugliotta, Antonio / Magelli, Matteo / Oresta, Italo Francesco / Zampieri, Nicolò	Study of wheel-rail adhesion during braking maneuvers	680-691
Baragetti, Sergio / Arcieri, Emanuele Vincenzo	Study on a new mobile anti-terror barrier	91-100
Ceccanti, Filippo / Giorgetti, Alessandro / Citti, Paolo	A Support Structure Design Strategy for Laser Powder Bed Fused Parts	667-679
Pero, Francesco Del / Delogu, Massimo / Berzi, Lorenzo / Dattilo, Caterina Antonia / Zonfrillo, Giovanni / Pierini, Marco	Sustainability assessment for different design solutions within the automotive field	906-925
Colombo, Chiara / Vergani, Laura	Thermographic applications for the rapid estimation of fatigue limit	658-666
Crescenzo, Francesco De / Salvini, Pietro	Two-Dimensional Discrete Model for Buckling of Helical Springs	28-39
Atzori, Bruno / Campagnolo, Alberto / Ricotta, Mauro / Meneghetti, Giovanni	Uniform scatter bands to analyse the fatigue strength of welded joints	66-79
Frascio, Mattia / Jilich, Michal / Pizzorni, Marco / Monti, Margherita / Avalle, Massimiliano / Zoppi, Matteo	The use of low pressure plasma surface modification for bonded joints to assembly a robotic gripper designed to be additive manufactured	204-212
Marques, Julian Marcell Enzveiler / Benasciutti, Denis / Tovo, Roberto	Variance of fatigue damage in stationary random loadings: comparison between time- and frequency-domain results	398-407
Cianetti, Filippo / Morettini, Giulia / Palmieri, Massimiliano / Zucca, Guido	Virtual qualification of aircraft parts: test simulation or acceptable evidence?	526-540

Informations
sur cette fiche
IssueID
60066
Publié(e) le:
10.01.2022
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.