Journal of Constructional Steel Research - juin 2024

Publié:	juin 2024

Auteur(s)	Titre	Page(s)
Liu, Xue Chun / Liu, Yu Kun / Chen, Xuesen / Li, Chuan Hao	Axial compression behavior of prefabricated cruciform-section thin-concrete-encased steel short column	108640
Amali, D. / Anbarasu, M.	Behaviour and design of cold-formed steel built-up I-beams composed of four channels	108671
Tong, Lewei / Wang, Yifei / Gao, Liang / Shi, Weizhou / Gao, Feng	Comparative study of different strengthening methods for circular hollow section K-joints	108668
Huang, Xing / He, Song-Yang / Liu, Xiang-Yun / Han, Da-Gang / Pu, Fan / Yan, Hui-Qiang / Kang, Shao-Bo	Compression behaviour of Q355 steel equal-leg angles with simulated local defects at the mid-height	108673
He, Kang / Hu, Shujun / Liu, Jiahao / Miao, Yushun / Tang, Jiajun / Chen, Yu	Compressive performance of eccentrically double-cell concrete-filled circular steel tubular columns	108639
Nyabongo, Emmanuel / Li, Xiaohua	Development of energy-early-dissipated braces based on web buckling of low-yield I-section steel	108672
Chen, Zhi-peng / Hu, Shuling / Zhu, Songye / Wang, Bin	Development of novel two-level SMA-based self-centring steel columns for seismic resilience	108629
Li, Guochang / Liu, Runze / Fang, Chen / Li, Xiao	Dynamic responses of high-strength concrete-filled high-strength steel tubular column under lateral impact	108663
Ellobody, Ehab	Editorial article for the Special Issue on: “Behavior and design of steel bridges and its components”	108642
Tang, Zhaoyang / Zhang, Chuntao	Effects of corrosion and pre-fatigue damage on the mechanical properties of HRB400E rebars	108641
Lan, Chengming / Feng, Ao / Zhang, Yaoyao / Ma, Junming / Wang, Jianjun / Li, Hui	Evaluation of corrosion fatigue life for high-strength steel wires	108666
Zhang, Juhui / He, Jiacheng / Peng, Bin / Li, Hongwei / Li, Baixian / Yan, Bo / Zhang, Jia-Hui	An experimental investigation for corrosion resistance of stainless clad steel plate	108655
Alali, Ahmed Abdulla / Tsavdaridis, Konstantinos Daniel	Experimental investigation on flexural behaviour of prefabricated ultra-shallow steel concrete composite slabs	108632
Ma, Yu / Bai, Yongtao / Xiang, Dingzhu / Wang, Xuanding / Liu, Jiepeng	Experimental study on fatigue behavior of prefabricated high-strength steel-concrete composite bridge beams	108586
Qiao, Huiyun / Xie, Xinyu / Hu, Xianzhong / Wang, Wei / Hong, Fang	Experimental study on large deflections of beam–column joints with reinforced flange plates	108634
Ning, Keyang / Yang, Lu / Ma, Yuefei / Fan, Junwei	Experimental study on seismic performance of stainless steel full-scale frames: Global response	108658
Chen, Siying / Zhang, Wanpeng / Xu, Yuanyuan / Zhou, Xiaojun / Chen, Yu / Chen, Wei	Experimental study on the degradation of mechanical properties of H-shaped steel columns in the chloride salt environment	108670
Xu, Lueqin / Yue, Kefeng / Fan, Lei / Liu, Jie / Gan, Chao / Xu, Lihan	Failure prediction of butterfly-shaped steel plate shear keys under cyclic loadings	108631
Rajchel, Mateusz / Siwowski, Tomasz	Fatigue assessment of a 100-year-old riveted truss railway bridge	108662
Zhang, Chengcheng / Tousignant, Kyle / Sun, Min	Fillet and PJP groove welds in CHS-to-CHS moment T-connections: Finite element investigation	108680
Pang, Shiyun / Kodur, Venkatesh / Wang, Weiyong	Fire resistance of steel structures, incorporating HSS - review and recommendations	108677
Dong, Liguo / Zheng, Shansuo / Yang, Song / Tian, Zhongxiang / Mu, Changjun / Ming, Ming	Hysteretic behavior and cyclic constitutive model of corroded low-alloy steel in a corrosive environment	108622
Ban, Huiyong / Yang, Xiaofeng / Shi, Yongjiu / Chung, Kwok-Fai / Hu, Yi-Fei	Micro-macro properties of stainless-clad bimetallic steel welded connections with different configurations	108637
Peng, Zengli / Zhao, Haisheng / Li, Xin / Xiong, Furui / Zhu, Tong	New ultra-low cycle fatigue model for metal alloys	108650
Huang, Shiji / Li, Qiusheng / Cai, Chenzhi / Shu, Zhenru / Sun, Mengmeng	Non-uniform temperature fields in steel tubes with different inclinations under solar radiation	108651
Lama, Lalita / Gernay, Thomas / Thai, Huu-Tai / Ngo, Tuan / Uy, Brian	Nonlinear analysis and design of high-strength concrete filled steel tubular columns under nonuniform fires	108633
Bondapalli, Surya Chandan / natesan, vijayakumar / Madhavan, Mahendrakumar	Numerical investigation of cold formed steel sleeve connection for channel sections subjected to combined bending and shear	108588
Xu, Bo / Xia, Junwu / Chang, Hongfei / Chen, Xiaomiao / Yang, Chen / Zhang, Lihai	Numerical-analytical investigation on bending performance of laminated beams in modular steel buildings	108630
Qiu, Bin / Lan, Tong / Ji, Xuanzhe / Lei, Honggang / Zhang, Shujia	Optimizing fatigue life prediction of high strength bolts in bolted spherical joints	108635
Hu, Shuling / Zhang, Ruibin / Shahria Alam, M. / Ding, Zhenghao	Post-earthquake repairability enhancement of BRBFs considering isotropic hardening with self-centering braces	108638
Jindra, Daniel / Kala, Zdenek / Kala, Jiří	Probabilistically modelled geometrical imperfections for reliability analysis of vertically loaded steel frames	108627
Liang, Guiming / Hou, Chao / Tan, Qinghua	Probability model for SCF in CFST joints under axial loading and in-plane bending	108660
Phillips, Matthew / Slein, Ryan / Sherman, Ryan J. / White, Donald W.	Proposed Improvements to AISC 360-22 Chapter F for Built-Up I-Section Members	108657
Liu, Qing / Qiang, Bin / Xie, Yunjie / Xie, Qiang / Zou, Yongfeng / Yao, Changrong / Li, Yadong	PWHT influence on welding residual stress in 45 mm bridge steel butt-welded joint	108674
Simwanda, L. / Gatheeshgar, P. / Ikotun, B. D. / Bock, M. / Onyari, E. K. / Ilunga, F. M.	Reliability analysis of shear design provisions for cold formed steel sections	108656
Li, Cheng-yu / Huang, Sheng / Hu, Yan-Ping / Li, Tao / Chen, Yan-Zhou	Seismic performance of H-shaped steel columns with slip friction connections at column ends	108664
Fan, Min / Guo, Hongchao / Li, Shen / Wang, Zhenshan / Liu, YunHe	Seismic performance of vertex-rotation type self-centering link beam equipped with SMA bars	108624
Pourzeynali, Saeid / Sarmast, Seyed Mahdi	Seismic vibration control of steel buildings with irregular plan using linked column	108643
Hou, Yanguo / Guo, Yanlin / Wen, Chenbao / Sun, Haojun	Shear-bearing capacity design of transformed triangular corrugated plates with top stringers	108682
Zhu, Bo-Li / Guo, Yan-Lin / Liao, Hao-xiang	Stability capacity design of shuttle-shaped restrained-buckling braces with uniform cross-section at mid-span	108623
Fan, Weijie / Zhou, Yuanzhen / Cheng, Pengju / Peng, Wei	Study on fatigue properties and life prediction of corroded steel strands	108636
Yan, Banfu / Li, Lianran / Qiu, Minghong / Zhu, Yanping / Yang, Panjie / Qin, Guifang / Shao, Xudong	Study on transverse structural performance of large cantilever steel-UHPC composite bridge deck	108667
Li, Bu-Shuan / Zhang, Kun / Zhou, Wei / Chen, Ming / Liu, Xue-chun / Zhao, Gen-Tian	Synergistic working performance of PEC hidden columns and RC composite short_limb shear walls	108676
Jin, Xiao / Liu, Le / Yu, Shaobin / Wang, Peijun / Liu, Mei / Yan, Yang / Huang, Xiuzhen	Tensile behavior of TOBs bolted T-stub to circular steel tube with Reverse-Channel	108626
Qiang, Xuhong / Shu, Yue / Jiang, Xu / Zhang, Shiyou	Theoretical study and design recommendations on load-carrying capacity of Fe-SMA-to-steel bolted joints	108665
Shang, Mingxu / Yang, Hua / Xing, Jihui / Wan, Jun	A unified hardening and damage characterization of Q960 steel under reverse loading	108659

Auteur(s)

Titre

Page(s)

Liu, Xue Chun / Liu, Yu Kun / Chen, Xuesen / Li, Chuan Hao

Axial compression behavior of prefabricated cruciform-section thin-concrete-encased steel short column

108640

Amali, D. / Anbarasu, M.

Behaviour and design of cold-formed steel built-up I-beams composed of four channels

108671

Tong, Lewei / Wang, Yifei / Gao, Liang / Shi, Weizhou / Gao, Feng

Comparative study of different strengthening methods for circular hollow section K-joints

108668

Huang, Xing / He, Song-Yang / Liu, Xiang-Yun / Han, Da-Gang / Pu, Fan / Yan, Hui-Qiang / Kang, Shao-Bo

Compression behaviour of Q355 steel equal-leg angles with simulated local defects at the mid-height

108673

He, Kang / Hu, Shujun / Liu, Jiahao / Miao, Yushun / Tang, Jiajun / Chen, Yu

Compressive performance of eccentrically double-cell concrete-filled circular steel tubular columns

108639

Nyabongo, Emmanuel / Li, Xiaohua

Development of energy-early-dissipated braces based on web buckling of low-yield I-section steel

108672

Chen, Zhi-peng / Hu, Shuling / Zhu, Songye / Wang, Bin

Development of novel two-level SMA-based self-centring steel columns for seismic resilience

108629

Li, Guochang / Liu, Runze / Fang, Chen / Li, Xiao

Dynamic responses of high-strength concrete-filled high-strength steel tubular column under lateral impact

108663

Ellobody, Ehab

Editorial article for the Special Issue on: “Behavior and design of steel bridges and its components”

108642

Tang, Zhaoyang / Zhang, Chuntao

Effects of corrosion and pre-fatigue damage on the mechanical properties of HRB400E rebars

108641

Lan, Chengming / Feng, Ao / Zhang, Yaoyao / Ma, Junming / Wang, Jianjun / Li, Hui

Evaluation of corrosion fatigue life for high-strength steel wires

108666

Zhang, Juhui / He, Jiacheng / Peng, Bin / Li, Hongwei / Li, Baixian / Yan, Bo / Zhang, Jia-Hui

An experimental investigation for corrosion resistance of stainless clad steel plate

108655

Alali, Ahmed Abdulla / Tsavdaridis, Konstantinos Daniel

Experimental investigation on flexural behaviour of prefabricated ultra-shallow steel concrete composite slabs

108632

Ma, Yu / Bai, Yongtao / Xiang, Dingzhu / Wang, Xuanding / Liu, Jiepeng

Experimental study on fatigue behavior of prefabricated high-strength steel-concrete composite bridge beams

108586

Qiao, Huiyun / Xie, Xinyu / Hu, Xianzhong / Wang, Wei / Hong, Fang

Experimental study on large deflections of beam–column joints with reinforced flange plates

108634

Ning, Keyang / Yang, Lu / Ma, Yuefei / Fan, Junwei

Experimental study on seismic performance of stainless steel full-scale frames: Global response

108658

Chen, Siying / Zhang, Wanpeng / Xu, Yuanyuan / Zhou, Xiaojun / Chen, Yu / Chen, Wei

Experimental study on the degradation of mechanical properties of H-shaped steel columns in the chloride salt environment

108670

Xu, Lueqin / Yue, Kefeng / Fan, Lei / Liu, Jie / Gan, Chao / Xu, Lihan

Failure prediction of butterfly-shaped steel plate shear keys under cyclic loadings

108631

Rajchel, Mateusz / Siwowski, Tomasz

Fatigue assessment of a 100-year-old riveted truss railway bridge

108662

Zhang, Chengcheng / Tousignant, Kyle / Sun, Min

Fillet and PJP groove welds in CHS-to-CHS moment T-connections: Finite element investigation

108680

Pang, Shiyun / Kodur, Venkatesh / Wang, Weiyong

Fire resistance of steel structures, incorporating HSS - review and recommendations

108677

Dong, Liguo / Zheng, Shansuo / Yang, Song / Tian, Zhongxiang / Mu, Changjun / Ming, Ming

Hysteretic behavior and cyclic constitutive model of corroded low-alloy steel in a corrosive environment

108622

Ban, Huiyong / Yang, Xiaofeng / Shi, Yongjiu / Chung, Kwok-Fai / Hu, Yi-Fei

Micro-macro properties of stainless-clad bimetallic steel welded connections with different configurations

108637

Peng, Zengli / Zhao, Haisheng / Li, Xin / Xiong, Furui / Zhu, Tong

New ultra-low cycle fatigue model for metal alloys

108650

Huang, Shiji / Li, Qiusheng / Cai, Chenzhi / Shu, Zhenru / Sun, Mengmeng

Non-uniform temperature fields in steel tubes with different inclinations under solar radiation

108651

Lama, Lalita / Gernay, Thomas / Thai, Huu-Tai / Ngo, Tuan / Uy, Brian

Nonlinear analysis and design of high-strength concrete filled steel tubular columns under nonuniform fires

108633

Bondapalli, Surya Chandan / natesan, vijayakumar / Madhavan, Mahendrakumar

Numerical investigation of cold formed steel sleeve connection for channel sections subjected to combined bending and shear

108588

Xu, Bo / Xia, Junwu / Chang, Hongfei / Chen, Xiaomiao / Yang, Chen / Zhang, Lihai

Numerical-analytical investigation on bending performance of laminated beams in modular steel buildings

108630

Qiu, Bin / Lan, Tong / Ji, Xuanzhe / Lei, Honggang / Zhang, Shujia

Optimizing fatigue life prediction of high strength bolts in bolted spherical joints

108635

Hu, Shuling / Zhang, Ruibin / Shahria Alam, M. / Ding, Zhenghao

Post-earthquake repairability enhancement of BRBFs considering isotropic hardening with self-centering braces

108638

Jindra, Daniel / Kala, Zdenek / Kala, Jiří

Probabilistically modelled geometrical imperfections for reliability analysis of vertically loaded steel frames

108627

Liang, Guiming / Hou, Chao / Tan, Qinghua

Probability model for SCF in CFST joints under axial loading and in-plane bending

108660

Phillips, Matthew / Slein, Ryan / Sherman, Ryan J. / White, Donald W.

Proposed Improvements to AISC 360-22 Chapter F for Built-Up I-Section Members

108657

Liu, Qing / Qiang, Bin / Xie, Yunjie / Xie, Qiang / Zou, Yongfeng / Yao, Changrong / Li, Yadong

PWHT influence on welding residual stress in 45 mm bridge steel butt-welded joint

108674

Simwanda, L. / Gatheeshgar, P. / Ikotun, B. D. / Bock, M. / Onyari, E. K. / Ilunga, F. M.

Reliability analysis of shear design provisions for cold formed steel sections

108656

Li, Cheng-yu / Huang, Sheng / Hu, Yan-Ping / Li, Tao / Chen, Yan-Zhou

Seismic performance of H-shaped steel columns with slip friction connections at column ends

108664

Fan, Min / Guo, Hongchao / Li, Shen / Wang, Zhenshan / Liu, YunHe

Seismic performance of vertex-rotation type self-centering link beam equipped with SMA bars

108624

Pourzeynali, Saeid / Sarmast, Seyed Mahdi

Seismic vibration control of steel buildings with irregular plan using linked column

108643

Hou, Yanguo / Guo, Yanlin / Wen, Chenbao / Sun, Haojun

Shear-bearing capacity design of transformed triangular corrugated plates with top stringers

108682

Zhu, Bo-Li / Guo, Yan-Lin / Liao, Hao-xiang

Stability capacity design of shuttle-shaped restrained-buckling braces with uniform cross-section at mid-span

108623

Fan, Weijie / Zhou, Yuanzhen / Cheng, Pengju / Peng, Wei

Study on fatigue properties and life prediction of corroded steel strands

108636

Yan, Banfu / Li, Lianran / Qiu, Minghong / Zhu, Yanping / Yang, Panjie / Qin, Guifang / Shao, Xudong

Study on transverse structural performance of large cantilever steel-UHPC composite bridge deck

108667

Li, Bu-Shuan / Zhang, Kun / Zhou, Wei / Chen, Ming / Liu, Xue-chun / Zhao, Gen-Tian

Synergistic working performance of PEC hidden columns and RC composite short_limb shear walls

108676

Jin, Xiao / Liu, Le / Yu, Shaobin / Wang, Peijun / Liu, Mei / Yan, Yang / Huang, Xiuzhen

Tensile behavior of TOBs bolted T-stub to circular steel tube with Reverse-Channel

108626

Qiang, Xuhong / Shu, Yue / Jiang, Xu / Zhang, Shiyou

Theoretical study and design recommendations on load-carrying capacity of Fe-SMA-to-steel bolted joints

108665

Shang, Mingxu / Yang, Hua / Xing, Jihui / Wan, Jun

A unified hardening and damage characterization of Q960 steel under reverse loading

108659

Publicité

Journal of Constructional Steel Research - juin 2024

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Constructional Steel Research - juin 2024

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.