Journal of Building Engineering - mai 2023

Publié:	mai 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Navaratnam, Satheeskumar / Selvaranjan, Kajanan / Jayasooriya, Darshana / Rajeev, Pathmanathan / Sanjayan, Jay	Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment	105835
Nguyen, Tien-Dung / Cherif, Rachid / Mahieux, Pierre-Yves / Lux, Jérôme / Aït-Mokhtar, Abdelkarim / Bastidas-Arteaga, Emilio	Artificial intelligence algorithms for prediction and sensitivity analysis of mechanical properties of recycled aggregate concrete: A review	105929
Ensafi, Mahnaz / Thabet, Walid / Afsari, Kereshmeh / Yang, Eunhwa	Challenges and gaps with user-led decision-making for prioritizing maintenance work orders	105840
Isa, Muhammad Nura / Awang, Hanizam	Characteristics of palm oil fuel ash geopolymer mortar activated with wood ash lye cured at ambient temperature	105851
Turgeon-Malette, Vicky / Chen, Xuande / Bah, Abdoul Salam / Conciatori, David / Sanchez, Thomas / Teguedy, Mohamed Cheikh / Sorelli, Luca	Chloride ion permeability of Ultra-high-performance fiber-reinforced concrete under sustained load	105842
Hussan, Ali / Levacher, Daniel / Mezazigh, Salim / Jardin, Louis	Co-valorization of sediments incorporating high and low organic matter with alkali-activated GGBS and hydraulic binder for use in road construction	105848
Requena-Garcia-Cruz, M. V. / Cattari, S. / Bento, R. / Morales-Esteban, A.	Comparative study of alternative equivalent frame approaches for the seismic assessment of masonry buildings in OpenSees	105877
Wang, Jilin / Xiang, Yu / Li, Yirui / Dong, Rongzhen / Xiao, Qiyuan / Cai, Yuxin / Ren, Xin / Long, Guangcheng	A comparative study on the properties and environmental impact of mortar with the different paste-to-aggregate ratios under direct electrical and steam curing	105918
Li, Ning	Comparison of the characteristics of the control strategies based on artificial neural network and genetic algorithm for air conditioning systems	105830
Khan, Kashan / Chen, Zhihua / Liu, Jiadi / Javed, Khadija / Tsavdaridis, Konstantinos Daniel / Poologanathan, Keerthan	Compressive behaviors of modular steel shear-keyed grouped tubular columns	105861
Li, Chaozhong / Meng, Xiaokai / Zhu, Jincai	Corrosion resistance of magnesium phosphate cement under long-term immersion in different solutions	105879
Ferreira, Ana / Pinheiro, Manuel Duarte / de Brito, Jorge / Mateus, Ricardo	A critical analysis of LEED, BREEAM and DGNB as sustainability assessment methods for retail buildings	105825
Dou, Chao / Xie, Cheng / Wang, Yan / Yang, Na	Cyclic loading test and lateral resistant behavior of flat-corrugated steel plate shear walls	105831
Kükrer, Ergin / Aker, Tuğçe / Eskin, Nurdil	Data-driven building energy benchmark modeling for bank branches under different climate conditions	105915
Xiao, Jianzhuang / Zeng, Liang / Ding, Tao / Xu, Hui / Tang, Haocheng	Deconstruction evaluation method of building structures based on digital technology	105901
Zhang, Bai / Zhu, Hong	Durability of seawater coral aggregate concrete under seawater immersion and dry-wet cycles	105894
Qin, Qinglong / Meng, Qingshan / Mei, Qinghai / Wu, Kai / Wang, Chi / Zhang, Jiwang	Dynamic response characteristics of coral reef sand concrete under impact loading	105847
Zedan Khalel, Hamad Hasan / Khan, Muhammad / Starr, Andrew	Dynamic response-based crack resistance analysis of fibre reinforced concrete specimens under different temperatures and crack depths	105865
John, Shaise K. / Nadir, Yashida / Cascardi, Alessio / Arif, M. Muhammed / Girija, K.	Effect of addition of nanoclay and SBR latex on fly ash-slag geopolymer mortar	105875
Liu, Xiao / Luo, Qifeng / Xie, Hui / Li, Shiyu / Zhang, Jiale / Xia, Chunlei / Ding, Yungchin / Chen, Yichen / Gao, Ruijun / Wei, Zhongyuan / Zhou, Wu / Wang, Ziming / Cui, Suping	Effect of calcium alumina silicate hydrate nano-seeds on the hydration of low clinker cement	105844
Chen, Zhe / Liu, Yushi / Wang, Mingzhi / Zhang, Boyi / Wang, Wei	Effect of coarse aggregate grading optimization on temperature, thermal stress and compressive strength of carbon fiber-reinforced concrete by ohmic heating curing	105882
Xiong, Yuanliang / Hu, Zhongshuai / Jia, Zijian / Liu, Chao / Ma, Liguo / Liu, Zhiyong	Effect of formic acid as an accelerator on foam-stability, compressive strength, and pore size distribution of foam concrete	105923
Hao, Ji / Yu, Bo / Li, Yue / Mu, Jinlei / Sui, Chune / Cui, Yan	Effect of high pump pressure on chloride migration in ITZ of concrete	105926
Dai, Jing / Gong, Chenchen / Wang, Yanfei / Huo, Liuqing / Lu, Lingchao	Effect of nano-silica on structure and properties of high sulfate resistant Portland cement mixed with mineral powder or fly ash	105843
Li, Biao / Yu, Shiting / Gao, Benhao / Li, Yang / Wu, Fanghong / Xia, DongTao / Chi, Yin / Wang, Songbo	Effect of recycled aggregate and steel fiber contents on the mechanical properties and sustainability aspects of alkali-activated slag-based concrete	105939
Liu, Ziqing / Dong, Zhiqiang / Sun, Yu / Zhu, Hong / Wu, Gang / Sun, Changjun / Soh, Chee-Kiong	Effect of resistive heating on the bond properties between iron-based shape memory bars and cement mortar	105895
Xu, Mengze / Chen, Xiaoyang / Han, Lu	Effect of tartaric acid on the early hydration process and water resistance of magnesium oxychloride cement	105838
Sharma, Himanshu / Sharma, Sanjay Kumar / Ashish, Deepankar Kumar / Adhikary, Suman Kumar / Singh, Gulab	Effect of various bio-deposition treatment techniques on recycled aggregate and recycled aggregate concrete	105868
Ray, Saikat Sinha / Peddinti, Pranav R. T. / Soni, Ritesh / Kim, Byungmin / Park, You-In / Kim, In-Chul / Lee, Chang Young / Kwon, Young-Nam	Effectiveness of nanoparticles-based ultrahydrophobic coating for concrete materials	105799
Chen, Sung-Ching / Zeng, Wang / Gu, Lian-Sheng / Lin, Wei-Ting / Wu, Bo / Xue, Kai-Xi / Hsu, Hui-Mi	Effects of combining binary mineral admixtures and manufactured basalt sand on the microscopic properties of mortar	105873
Diao, Yu / Li, Pengjin / Huang, Jianyou / Liu, Shi / Guo, Xin / Hu, Qingsong	Effects of environmental factors on mechanical properties of biomimetic mineralized mortar	105850
Pang, Yuyang / Li, Zhenqi / Wang, Qiang / Qi, Biao	Effects of the liquid rubber modified adhesive on the bond-slip response of the CFRP-steel interface	105857
Olarinoye, I. O. / Kolo, M. T. / Shittu, H. O. / Anumah, A. S.	Estimation of indoor gamma radiation dose rate from concrete blocks constructed from tin mine tailings	105934
Perez-Diaz, Edgar D. / Reyes-Araiza, José L. / Millan-Malo, Beatriz M. / Londoño-Restrepo, Sandra M. / Rodríguez-García, Mario E.	Evaluation of bamboo cortex ash as supplementary cementitious material: Comparative analysis with sugarcane bagasse ash and natural pozzolan	105846
Neusser, Maximilian / Dolezal, Franz / Wurm, Markus / Müllner, Herbert / Bednar, Thomas	Evaluation of the acoustic and environmental performance of different wall structures with particular emphasis on straw	105922
Zhou, Linli / Tan, Ping / Teng, Xiaofei	Experiment and analysis of self-centering semicircular corrugated steel plate shear walls with edge stiffeners	105876
Zhou, Yingwu / Zhang, Ruyin / Zhu, Ran / Guan, Zhipei / Xing, Feng / Guo, Menghuan / Cao, Wanlin / Hu, Biao	Experimental and numerical investigation on the microstructure and failure characteristics of concrete using strengthened recycled coarse aggregate	105880
Wang, Jiawei / Zhou, Wei	Experimental and numerical response of unbonded post-tensioned rocking wall under lateral cyclic loading	105827
Wang, Longlong / Song, Yanchen / Han, Qiang / Wang, Zeyu	Experimental investigation on the dynamic behavior of grouted splice sleeve connector under fast tensile loading	105927
Liu, Wenguang / Wang, Kun / Gong, Zuping / Yang, Sen / Gong, Xuhua	Experimental study on joint’s seismic performance of a PCSW with thermal insulation elements	105886
Wang, Xijun / He, Minjuan / Li, Zheng	Experimental testing of platform-type and balloon-type cross-laminated timber (CLT) shear walls with supplemental energy dissipators	105943
Gołaszewski, Jacek / Klemczak, Barbara / Gołaszewska, Małgorzata / Smolana, Aneta / Cygan, Grzegorz	The feasibility of using a high volume of non-clinker binders in self-compacting concrete related to its basic engineering properties	105893
Kim, Hyeon-Jin / Park, Hong-Gun	Flexural test for steel-concrete composite walls (aspect ratio 2.0) with steel U-Section boundary element	105824
Tagayi, Roland Kobla / Baek, Jongbok / Kim, Jonghoon	Flower pollination global peak search algorithm for partially shaded solar photovoltaic system	105818
Essam, Yara / El-Faramawy, Nabil / Ramadan, Wageeh / Ramadan, M.	From dangerous wastes to green construction materials, as thermally stable-radiation blocker, in presence of meso-porous magnesia and alumina	105896
Feltes, Júlio / Borsoi, Giovanni / Caiado, Pedro / Dionísio, Amélia / Parracha, João / Flores-Colen, Inês	Graffiti removal on external thermal insulation composite systems through chemical-mechanical methods: A feasible protocol?	105872
Liu, Junxia / Yan, Yimeng / Li, Zhongyu / Yang, Fei / Hai, Ran	Hardening and microstructural properties of red mud modified magnesium ammonium phosphate cements	105849
Zhi, Yuan / Yang, Xudong	Household solid desiccant dehumidifier with multiple operating modes: Concept and prototype device	105964
Adesanya, Elijah / Ezu, Amarachi / Nguyen, Hoang / Rößler, Christine / Sreenivasan, Harisankar / Ohenoja, Katja / Kinnunen, Paivo / Illikainen, Mirja	Hydration of blended ladle slag and calcium aluminate cement	105855
Jaroš, P. / Vertaľ, M. / Slávik, R.	Hygric and thermal properties of Slovak building sandstones	105891
Kaczorek, Dobrosława / Basińska, Małgorzata / Koczyk, Halina	Hygrothermal behaviour of a room with different occupancy scenarios	105928
Kang, Hyunuk / Lee, Yangwoo / Lee, Jihoon / Moon, Juhyuk	Importance of amorphous content, surface energy, and preferred orientation on the accurate quantification of cement minerals in clinkers	105887
Hatami, Ladan / Jamshidi, Masoud / Yavari, Mahnaz	Improving mechanical/colorimetric properties of self-compacting mortar using an intensively colored-nanoparticle containing polymeric paste	105841
Elizalde, Joan Stephanie G. / Chiou, Yun-Shang	Improving the detectability and confirmation of hidden surface corrosion on metal sheets using active infrared thermography	105931
Zahra, Tatheer / Dorji, Jigme / Thamboo, Julian / Asad, Mohammad / Kasinski, Wojtek / Nardone, Arlene	In-plane and out-of-plane shear characteristics of reinforced mortarless concrete block masonry	105938
Taj, Khalilullah / Akturk, Busra / Ulukaya, Serhan	Influence of carbonation curing and nano-silica incorporation on compressive strength and micro-structural development of binary RMC-based systems	105856
Xing, Jiarui / Zhou, Yang / Peng, Zechuan / Wang, Jiawei / Jin, Yanji / Jin, Ming	The influence of different kinds of weak acid salts on the macro-performance, micro-structure, and hydration mechanism of the supersulfated cement	105937
Thanh Tran, Duc / Lee, Han-Seung / Singh, Jitendra Kumar	Influence of phosphate ions on passive film formation in amino acid-containing concrete pore solutions with chloride ions	105834
Liu, Xiaoqiang / Xu, Chengxiang / Peng, Sheng / Zhou, Bingyang	Influence of staggered floor and unequal height of left and right beam on seismic behavior of CFSST column-to-HSS beam composite frames	105878
Genuardi, Marco Daniele / Wiegand, Marlies / Opel, Oliver	Installation of an ultrafiltration plant in a multi-family house to reduce the hot-water temperature and energy demand: A case study in Germany	105898
Ling, Dickson Chuan Hao / Abd Razak, Rafiza / Yahya, Zarina / Abdullah, Mohd Mustafa Al Bakri / Chaiprapa, Jitrin / Phan, Vu To-Anh / Mohamed, Rosnita / Aziz, Ikmal Hakem	Investigation of influence factors and surface treatment on palm oil boiler ash (POBA) based geopolymer artificial aggregate: Impregnation vs. coating method	105936
Dong, Hongying / Qin, Jia / Cao, Wanlin / Wang, Hao	Investigation on axial compressive behavior of pentagonal section steel-reinforced concrete columns	105954
Majumder, Arnas / Stochino, Flavio / Frattolillo, Andrea / Valdes, Monica / Mancusi, Geminiano / Martinelli, Enzo	Jute fiber-reinforced mortars: mechanical response and thermal performance	105888
Bošković, Ilija / Radivojevic, Ana	Life cycle greenhouse gas emissions of hemp-lime concrete wall constructions in Serbia: The impact of carbon sequestration, transport, waste production and end of life biogenic carbon emission	105908
Neri, M.	Limiting the temperature at the chimney-roof penetration: Innovative roof passage with fins and case to meet the latest European standards and enhance heat recovery	105902
Chen, Wenguang / Xu, Jinjun / Li, Zhipeng / Huang, Xinliang / Wu, Yuntian	Load-carrying capacity of circular recycled aggregate concrete-filled steel tubular stub columns under axial compression: Reliability analysis and design factor calibration	105935
Mahmood, Wajeeha / Ayub, Tehmina / Khan, Asad-ur-Rehman	Mechanical properties and corrosion resistance of recycled aggregate concrete exposed to accelerated and natural marine environment	105867
Hou, Yongqiang / Yin, Shenghua / Yang, Shixing / Chen, Xin / Du, Huihui	Mechanical properties, damage evolution and energy dissipation of cemented tailings backfill under impact loading	105912
Fang, Guohao / Chen, Jieting / Dong, Biqin / Liu, Bing	Microstructure and micromechanical properties of interfacial transition zone in green recycled aggregate concrete	105860
Bianchini, Nicoletta / Mendes, Nuno / Calderini, Chiara / Lourenço, Paulo B.	Modelling of the dynamic response of a reduced scale dry joints groin vault	105826
Zhang, Huan / Zhao, Hui / Liu, Faqi / Yang, Hua / Geng, Yue / Pan, Kainan	Models for uniaxial stress-strain relationship and thermal properties of fine recycled aggregate concrete exposed to elevated temperatures	105869
Huang, Wenjie / Wang, Qing / Ma, Yuwei / Lai, Mianheng / Ho, J. C. M.	Mortar film thickness on the autogenous shrinkage of concrete: Test and simulation	105833
Kudela, Libor / Špiláček, Michal / Pospíšil, Jiří	Multicomponent numerical model for heat pump control with low-temperature heat storage: A benchmark in the conditions of Central Europe	105829
Kosson, Michael / Brown, Lesa / Sanchez, Florence	Nanomechanical characterization of 3D printed cement pastes	105874
Ma, Wenzhuo / Wang, Yutong / Huang, Liang / Yan, Libo / Kasal, Bohumil	Natural and recycled aggregate concrete containing rice husk ash as replacement of cement: Mechanical properties, microstructure, strength model and statistical analysis	105917
Salsbury, Timothy I. / Rogers, Austin P. / Yoder, Tim A. / Johnson, Stephanie R. / Duan, Xiaoli	A new control score concept for building performance assessment	105770
Dong, Enlai / Chen, Ziao / Wu, Chiqiu / Lv, Wei / Fan, Dingqiang / Feng, Yuan / Yu, Rui	New insights into determining the “time zero” of autogenous shrinkage in low water/binder cement-based composites (LW/B-CC) system based on relaxation theory	105852
Zhong, Wei-hui / Tan, Zheng / Meng, Bao / Chou, Ying-zhao / Zheng, Yu-hui / Duan, Shi-chao	Numerical investigation of collapse behavior of steel–concrete composite frames containing corrugated webs with and without openings	105889
Ren, Fangzhou / Zhou, Chunsheng / Zeng, Qiang / Wang, Zhendi / Wang, Wei	Numerical investigations into the physical significance of sorptivity for cement-based materials considering water sensitivity	105952
Yu, Xiaoniu / Xu, Yidong	OAs and CAB capture CO2 and conversion to carbonates and its potential applications in civil engineering	105904
Nguyễn, Phương Hoàng / Nguyễn, Huy Hoàng / Lương, Quang-Hiếu / Bolander, John E. / Lee, Bang Yeon	Optimization of fly ash-based polyethylene fiber-reinforced engineered cement-free composites with low-density and ultra-ductility using Taguchi robust design method	105946
Liu, Ying / Gao, Yafeng / Zhuang, Chaoqun / Shi, Dachuan / Xu, Yang / Guan, Jingxuan / Di, Yanqiang	Optimization of top-floor rooms coupling cool roofs, natural ventilation and solar shading for residential buildings in hot-summer and warm-winter zones	105933
Li, Hao / Wang, Libin / Wei, Yang / Semple, Katherine E. / Dai, Chunping	Out-of-plane bending behavior of cross-laminated timber members enhanced with fiber-reinforced polymers	105862
Ashraf, Muhammad Jawad / Idrees, Maria / Akbar, Arslan	Performance of silica fume slurry treated recycled aggregate concrete reinforced with carbon fibers	105892
Tomei, Valentina / Zucconi, Maria / Ferracuti, Barbara	Post-tensioned rocking dissipative timber wall systems: Numerical prediction	105897
Manjunath, Balasubramanya / Ouellet-Plamondon, Claudiane M. / Das, B. B. / Bhojaraju, Chandrasekhar	Potential utilization of regional cashew nutshell ash wastes as a cementitious replacement on the performance and environmental impact of eco-friendly mortar	105941
Zhou, Gang / Li, Shuailong / Zhang, Qingtao / Liang, Yuntao / Song, Shuanglin / Sun, Biao / Wang, Qi	Preparation and properties of bio-based self-healing fire prevention gel reinforced with expanded graphite ligand	105845
Iranfar, Soha / Karbala, Mohammad Mehdi / Shahsavari, Mohammad Hossein / Vandeginste, Veerle	Prioritization of habitat construction materials on Mars based on multi-criteria decision-making	105864
Miah, Md Jihad / Pei, Junjie / Kim, Hyeju / Sharma, Raju / Jang, Jeong Gook / Ahn, Jiwhan	Property assessment of an eco-friendly mortar reinforced with recycled mask fiber derived from COVID-19 single-use face masks	105885
Wang, Jun / Dong, Hao	PVA fiber-reinforced ultrafine fly ash concrete: Engineering properties, resistance to chloride ion penetration, and microstructure	105858
Ahmed, Ghafur H.	A review of “3D concrete printing”: Materials and process characterization, economic considerations and environmental sustainability	105863
Ma, Danan / Zhang, Maohua / Cui, Jiyin	A review on the deterioration of mechanical and durability performance of marine-concrete under the scouring action	105924
Uzdil, Oguz / Cosgun, Turgay / Sayin, Baris / Akcay, Cemil	Seismic performance evaluation and strengthening proposal for a reconstruction project of a historic masonry building demolished in the 1940s	105914
Kim, Jong-Hwan / Park, Young-Jun / Yi, Chang-Yong / Lee, Dong-Eun	Stochastic flame locating method hybridizing Kalman filter and deep neural network for rapid fire response at construction sites	105967
Li, Ning / Jin, Zuquan / Shen, Kai / Long, Guangcheng / Yu, Yong / Fu, Qiang / Xiong, Chuansheng / Pang, Bo / Zhang, Xiaoying	Strategies to improve the impact resistance of self-compacting concrete (SCC) after freeze-thaw cycles	105854
Ishak, Shafiq / Mandal, Soumen / Lee, Han-Seung / Lee, Dong-Eun / Chen, Zhengxin	Structure-property correlation of thermally activated nano-size phase change material in the cementitious system	105871
Li, Zehao / Di, Zhenzhen / Chang, Miao / Zheng, Ji / Tanaka, Toshio / Kuroi, Kiyoshi	Study on the influencing factors on indoor PM2.5 of office buildings in beijing based on statistical and machine learning methods	105240
Wang, Xingxing / Wei, Wang / Wenchao, Nie	Study on the load-carrying capacity of an innovative cold-formed steel floor system	105819
Jiang, Lu / Han, Qiangqiang / Wang, Wenjing / Zhang, Yu / Lu, Wei / Li, Zhu	A sugar-coated microbial agent for self-healing cracks in concrete	105890
Raza, Ali / Ouni, Mohamed Hechmi El / Khan, Qaiser Uz Zaman / Azab, Marc / Khan, Dawood / Elhadi, Khaled Mohamed / Alashker, Yasser	Sustainability assessment, structural performance and challenges of self-healing bio-mineralized concrete: A systematic review for built environment applications	105839
Zhang, Yating / Sun, Xiangwei	Synergistic effects of nano-silica and fly ash on the mechanical properties and durability of internal-cured concrete incorporating artificial shale ceramsite	105905
Wang, Sen / Gainey, Lloyd / Mackinnon, Ian D. R. / Allen, Charlotte / Gu, Yuantong / Xi, Yunfei	Thermal behaviors of clay minerals as key components and additives for fired brick properties: A review	105802
Zhao, Yifan / Li, Wei / Jiang, Changwei	Thermal sensation and occupancy-based cooperative control method for multi-zone VAV air-conditioning systems	105859
Bahman-Zadeh, Farnaz / Zolfagharnasab, Arash / Pourebrahimi, Mohammadreza / Mirabrishami, Mahdi / Ramezanianpour, Ali Akbar	Thermodynamic and experimental study on chloride binding of limestone containing concrete in sulfate-chloride solution	105940
Dong, Yemin / Liu, Yedongyang / Hu, Chuanlin	Towards greener ultra-high performance concrete based on highly-efficient utilization of calcined clay and limestone powder	105836
Ge, Yaping / Tian, Xiang / Huang, Dunwen / Zhong, Qingyu / Yang, Yiwei / Peng, Hui	Understanding efflorescence behavior and compressive strength evolution of metakaolin-based geopolymer under a pore structure perspective	105828
Martins, Ana Carolina Pereira / Franco de Carvalho, José Maria / Duarte, Matheus do Nascimento / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes / Fiorotti Peixoto, Ricardo André	Use of steel slag and LAS-based modifying admixture in obtaining highly eco-efficient precast concrete products	105884
Hsu, Hsieh-Chih / Pan, Chen-Yu / Wu, I-Cheng / Liu, Che-Cheng / Zhuang, Zheng-Yun	Using the big data analysis and basic information from lecture Halls to predict air change rate	105817
Sathiparan, Navaratnarajah / Anburuvel, Arulanantham / Selvam, Virgin Vinusha	Utilization of agro-waste groundnut shell and its derivatives in sustainable construction and building materials – A review	105866
Qv, Dehu / Duan, Xiangjie / Wang, Jijin / Wang, Luyang / Yao, Yang	Visualization of physical-field structural evolution: Characteristic curve based on the non-equilibrium potential differences in an air-conditioning environment	105561
Peng, H. Y. / Dai, S. F. / Liu, H. J.	Wind loading characteristics and roof zoning of solar arrays mounted on flat-roofed tall buildings	105823

Informations
sur cette fiche
IssueID
68982
Publié(e) le:
20.02.2023
Modifié(e) le:
20.02.2023

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - mai 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - mai 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.