Construction and Building Materials - octobre 2023

Publié:	octobre 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Kristombu Baduge, Shanaka / Thilakarathna, Sadeep / Perera, Jude Shalitha / Ruwanpathirana, Gihan P. / Doyle, Lachlan / Duckett, Mitchell / Lee, Joel / Saenda, Jiratigan / Mendis, Priyan	Assessment of crack severity of asphalt pavements using deep learning algorithms and geospatial system	132684
Raza Khan, Ali / Ali, Ayman / Pandya, Harshdutta / Alfalah, Ahmad / Mehta, Yusuf / Elshaer, Mohamed / DeCarlo, Christopher	Assessment of the impact of binder grade on the laboratory performance of fiber reinforced asphalt mixtures	132735
Kanagaraj, Balamurali / Anand, N. / Jerry, Rohith / Samuvel Raj, R. / Lublóy, Éva	Axial compressive behaviour and physical characteristics of high strength self-compacting geopolymer concrete (HSGC) columns exposed to elevated temperature	132866
Yu, Jincheng / Qian, Jueshi / Chen, Huaxin / Ji, Yongan / Kuang, Dongliang / Jia, Xingwen / Guan, Bowen	Behavior of magnesium phosphate cement with addition of sulphoaluminate cement at elevated temperatures	132932
Deng, Rongsheng / Chen, Bao	Bentonite homogenization with technological voids upon hydration	132910
Zhou, Yaming / Zhang, Ru / Zhang, Jianhai / Li, Yonghong / Li, Zhiguo / Xing, Xianglin / Zhang, Qianjin / Feng, Gan	Brazilian splitting testing of the restorative properties of eco-friendly epoxy resin on cracked granite samples with various widths	132907
Chen, Ye / Li, Hongjun / Yu, Wen / Dong, Xinze / He, Guofeng / Wu, Tongda	Characterization of the micromorphology of asphalt surfaces using atomic force microscopy	132845
Chen, Lijie / Khan, Mahram / Deng, Xiaowei / Su, Ray K. L.	Chloride-induced corrosion propagation of alkali-activated slag mortar with pulverized fuel ash and metakaolin replacements	132707
Hou, Chen / Wang, Qing / Song, Wenhao / Xu, Shuangshuang / Li, Zhe / Zhuo, Xiaoya	Chlorine resistance of tannic acid anticorrosive coating on galvanized steel in simulated concrete pore solution	132657
Julián Rivera, J. / Battista, Nicolás D. / Oviedo, Adrián / Rebollo, Oscar R. / Zapata Ferrero, Ignacio / Fensel, Enrique A. / Luis Delbono, H. / Martìnez, Adriana H.	Cold mix asphalt with polymeric stone for low traffic volume roads	132714
Aseem, Ahmed / Ng, Ching Tai	Collinear nonlinear guided wave mixing for debonding detection in reinforced concrete beam using longitudinal and torsional wave modes	132876
Suh, Heongwon / Kim, Gyeongryul / Cho, Seongmin / Li, Peiqi / Son, Dong-Hee / Koo, Doheon / Lim, Jun / Choi, Chang-Sik / Seok, Seungwook / Bae, Sungchul	Comparative analysis of the synergistic effects of hybrid nanomaterial reinforcement in cementitious composites: A perspective for pore refinement and thermal resistance	132856
Ruan, Wenqiang / Zhang, Zhenguang / Cai, Mengmeng / She, Yimeng / Liu, Jiatai / Guo, Wenjie / Ma, Xiaoe / Liao, Jianguo / He, Xiaofang	Comparative study of the effects of magnesium aluminum silicate and bentonite clay on the properties of magnesium phosphate cement-based grouting material	132852
Soares, Augusto Cezar Maciel / Costa, Hugo / do Carmo, Ricardo / Rodrigues, Ana / Gaspar, Florindo / Júlio, Eduardo	Comprehensive design methodology for 3D printing mortars	132804
Lee, Hye-Jin / Yang, Keun-Hyeok	Compressive and flexural toughness indices of lightweight aggregate concrete reinforced with micro-steel fibers	132965
Liu, Ru-Rui / Ding, Ran / Fan, Jian-Sheng / Tao, Mu-Xuan	Constitutive laws of softened UHPC in biaxial tension–compression: Experimental study using a planar bi-directional element tester	132966
Montazeri, Fatima / Ahmadi, Hamid Reza / Ghahari, Mehdi	Creating anti-slip properties in porcelain floor tiles by recycling alumina rollers from tile kilns	132969
Rachman, Firmansyah / Yang, Shih-Hsien / Riadhotussolihah, Septia / Chintya, Hanna / Chen, Yin-Hong / Fini, Elham	Deagglomeration of Asphalt Binder Using Kraft Lignin: A Sustainable Valorization of Waste from the Pulping Industry	132725
Wei, Xueda / Qiao, Xiaolei / Chen, Tielin	Design framework for rehabilitation grout materials during metro operation period: A combination of improved central composite design modeling and multi-objective particle swarm optimization	132690
Ehsani, Mehrdad / Hajikarimi, Pouria / Esfandiar, Masoud / Rahi, Mohammad / Rasouli, Behzad / Yousefi, Yousef / Nejad, Fereidoon Moghadas	Developing deterministic and probabilistic prediction models to evaluate high-temperature performance of modified bitumens	132808
Cao, Feng / Qiao, Hongxia / Zhang, Yunsheng / Li, Shuangying / Cui, Lijun	Early-age performance and mechanism of magnesium oxychloride cement mortar mixed with highland barley straw ash	132979
Tian, Feiyu / Mao, Wei / Xu, Xinwu	Effect of a layered combination of APP and TBC on the mechanics and flame retardancy of poplar strandboards	132881
Luan, Yingcheng / Zhang, Weiguang / Ma, Tao / Cao, Jinde / Shi, Xinli / Tong, Zheng	Effect of existing pavement condition and overlaying strategy on the reflective cracking resistance of asphalt pavement	132620
Feng, Zhizhuo / Shen, Dejian / Huang, Quan / Zhang, Tingting	Effect of fly ash on early-age properties and viscoelastic behaviors of supersulfated cement concrete under different degrees of restraint	132895
Scherer, Camila / Felippi de Lima, Luiza / Eunice Zorzi, Janete	Effect of partial replacement of cement by fine powders on the corrosion resistance of concrete	132982
Wang, Zhongli / Xia, Tian / Xu, Jianhui / Li, Youbing / Wang, Min	Effect of polyurethane addition on the dynamic mechanical properties of cement emulsified asphalt	132693
Gong, Xiangbing / Huang, Xue / Qian, Guoping / Liu, Hongfu	Effect of thickness on the behavior of aggregate-asphalt-aggregate film subjected to dynamic shearing and uniaxial tension	132680
Das, Kunal Krishna / Sharma, Raju / Dutta, Sagar / Seo, Joonho / Jang, Jeong Gook	Effects of curing regime, cement type, and water-to-cement ratio on the physicochemical, mechanical, and hydraulic properties of pervious mortar	132897
Klima, K. M. / Luo, Y. / Brouwers, H. J. H. / Yu, Qingliang	Effects of mineral wool waste in alkali activated-artificial aggregates for high-temperature applications	132937
Li, Jingzhe / Zhan, Binggen / Gao, Peng / Hu, Li / Qiao, Min / Sha, Huiling / Yu, Qijun	Effects of recycled concrete powders on the rheology, setting and early age strength of cement paste	132899
Li, Jing / Tang, Fei	Effects of two metal nanoparticles on performance properties of asphalt binder and stone matrix asphalt mixtures containing waste high density polyethelene	132787
Daneshvari, Mohammad Hassan / Nourmohammadi, Ebrahim / Ameri, Mahmoud / Mojaradi, Barat	Efficient LBP-GLCM texture analysis for asphalt pavement raveling detection using eXtreme Gradient Boost	132731
He, Haijie / Shuang, E. / Wen, Tiande / Yao, Jun / Wang, Xiaogang / He, Chuang / Yu, Yang	Employing novel N-doped graphene quantum dots to improve chloride binding of cement	132944
Amjad, Hassan / Ahmad, Farhan / Qureshi, Muhammad Irshad	Enhanced mechanical and durability resilience of plastic aggregate concrete modified with nano-iron oxide and sisal fiber reinforcement	132911
Khan, Adnan / Huyan, Ju / Zhang, Runhua / Zhu, Yu / Zhang, Weiguang / Ying, Gao / Ahmad, Kamal Nasir / Shah, Syed Khaliq	An ensemble tree-based prediction of Marshall mix design parameters and resilient modulus in stabilized base materials	132833
Prusty, Jnyanendra Kumar / Pradhan, Bulu	Evaluation of durability and microstructure evolution of chloride added fly ash and fly ash-GGBS based geopolymer concrete	132925
Rambabu, Dadi / Sharma, Shashi Kant / Abdul Akbar, M.	Evaluation of roller compacted concrete for its application as high traffic resisting pavements with fatigue analysis	132977
Liao, Hui / Tavassoti, Pejoohan / Sharma, Aditi / Baaj, Hassan	Evaluation of rutting resistance and moisture susceptibility of high RAP content asphalt mixtures containing bio-based rejuvenators	132859
Ranatunga, Kavishan Sathsara / del Rey Castillo, Enrique / Toma, Charlotte Louise	Evaluation of the optimal concrete mix design with coconut shell ash as a partial cement replacement	132978
Ling, Senlin / Jelagin, Denis / Sun, Daquan / Fadil, Hassan	Experimental and numerical analyses on the fracture characteristics of cement-asphalt mastic-aggregate interface	132971
Li, Haifeng / Li, Yinglei / Xiong, Zhe / Shu, Zhi / Hong, Yiping / Chen, Saijian / Su, Yue	Experimental and theoretical study on elliptical rubber concrete filled double-skin GFRP short tubes under axial compression	132796
Pan, Gaofeng / Yuan, Shengyang / Zheng, Yixuan / Tian, Maocheng / Wang, Yibo / Liu, Xianfeng	Experimental investigation on the effect of initial structure on the water retention behavior of Mile clay	133000
Şimşek, Barış / Uygunoğlu, Tayfun / Uğur, Mücahit / Ceran, Özge Bildi / Dilmaç, Ömer Faruk	Experimental investigations of aluminum hydroxide nanoparticles on properties of cementitious composites using macro and micro scale tests	132955
Furtado, André / Rodrigues, Hugo / Arêde, António	Experimental study of the flexural strength of masonry brick walls strengthened with thermal insulation	132934
Qiang, Xuhong / Chen, Longlong / Jiang, Xu / Dong, Hao	Experimental study on anchorage and activation performance of Fe-SMA strips for structural reinforcements	132961
Jin, Hesong / Liu, Jun / Zhong, Daojun / Tang, Luping	Experimental study on chloride ion diffusion behavior and microstructure in concrete under alternating ambient humidity conditions	132886
Wang, Xiaodong / Li, Ningjing / Wang, Wenqi	Experimental study on crushing of concrete slabs by high-voltage pulse discharge	132951
Zhang, Jiqiang / Dong, Wei / Zhang, Binsheng	Experimental study on local crack propagation of concrete under three-point bending	132699
Yang, Yang / Xu, Cheng / Xia, Liujia / Tao, Qiyu	Experimental study on mechanical properties of new FRP trusses reinforced sleepers under the stacking condition	132816
Zeng, Cheng / Zhao, Guohan / Xie, Jiawei / Huang, Jinsong / Wang, Yankun	An explainable artificial intelligence approach for mud pumping prediction in railway track based on GIS information and in-service train monitoring data	132716
Prakash, Bhaskar / Saravanan, T. Jothi / Kabeer, K. I. Syed Ahmed / Bisht, Kunal	Exploring the potential of waste marble powder as a sustainable substitute to cement in cement-based composites: A review	132887
Abd-El-Raoof, F. / Youssef, H. F. / El-Sokkary, T. M. / Abd El-Shakour, Z. A. / Tawfik, A.	Fabrication and characterization of calcium aluminates cement via microwave-hydrothermal route: Mayenite, katoite, and hydrocalumite	132988
Chen, Qingsheng / Rong, Huiyang / Tao, Gaoliang / Nimbalkar, Sanjay / Xie, Kai	Fatigue characteristics of nano-SiO2 cemented soil under coupled effects of dry-wet cycle and seawater corrosion	132579
Zhang, Liying / Ding, Enjie / Bai, Ben / Wang, Xue / Zhang, Wenting / Liu, Wanshuang / Bi, Shuguang	Fe3O4 incorporated geopolymer nanocomposites for microwave absorption: Role of size, structure, and dispersion	132985
Zhao, Yuechao / Chen, Meizhu / Wu, Shaopeng / Zhu, Yunsheng / Zhou, Xinxing / Yang, Chao / Zhao, Zenggang / Zhang, Jianwei / Chen, Dongyu	Feasibility assessment of palmitamide derived from waste edible oil as a warm mix asphalt additive	132972
Sun, Zhigao / Wu, Yuan / Xie, Han / Jin, Siqingaowa / Zhang, Dongliang / Wang, Mitang	Feasibility of high-magnesium nickel slag-fly ash as precursor of magnesium phosphate cement and its hydration mechanism	132880
Traver, Celia / Ruiz-Pinilla, Joaquín G. / Monserrrat, Andrea / Montoya-Coronado, Luis A. / Miguel, Pedro F. / Ribas, Carlos / Cladera, Antoni / Bonet, José L.	Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges	132906
Yu, Liang / Bi, Haifeng / Wang, Zengyao / Wu, Fengnian / Hou, Pengkun / Wang, Shoude / Huang, Yongbo / Cheng, Xin	Feasibility of using iron-rich phosphoaluminate cement to prepare anti-corrosive coatings for rebars	132736
Zhang, Tingting / Lu, Yao / Lu, Zeguang	A flame-retardant corn straw brick (FRCSB): Thermal stability, flammability and flame-retardant mechanism	132927
Mostafa, Omar M. / Rahman, Muhammad K. / Al-Zahrani, Mesfer M. / Adekunle, Saheed K. / Al-Osta, Mohammed A. / Najamuddin, Syed K.	Flexural behavior and bond coefficient of BFRP bar reinforced normal and high strength concrete beams	132896
Dai, Xiaodi / Aydın, Serdar / Yardımcı, Mert Yücel / De Schutter, Geert	Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate/sodium hydroxide – Activated slag mixtures	132943
Mouzoun, Kaoutar / Bouyahyaoui, Azzeddine / Cherradi, Toufik / Zemed, Najib / Simou, Sana	From waste to strength: Experimental design and optimization of mechanical properties of concrete using reused PVC-U drainage pipes	132938
Gao, Yang / Kainuma, Shigenobu / Yang, Muye / Ishihara, Shuji / Inoue, Daichi	Galvanic corrosion behavior of hot-dip Al and 55Al–Zn coatings applied to steel bolted joints in atmospheric environments	132694
Gong, Xing / Liu, Quantao / Liu, Xuefei / Wan, Pei / Jiang, Peng / Chen, Shuaichao / Wang, Huan / Wu, Shaopeng	Green synthesis of end-capped polyurethane prepolymer with high storage stability and its effects on bitumen properties	132860
Yue, Yanan / Gao, Shuling / Li, Ning / Zhang, Rui	High-cycle fatigue performance of corroded Q690E high strength steel and Q690qENH high-strength weathering steel	132835
Gao, Yu / Gao, Jinrui / Rao, Meijuan / Wang, Fazhou / Yang, Lu	High-ferrite Portland cement with glass–ceramic aggregates: Mechanical properties, durability, and interfacial transition zone	132884
Hu, Jianying / Liu, Hao / Li, Yuwei / Ma, Tao	Highly reflective and fluorescent TiO2 quantum dots modified asphalt coating: Engineering characterizations and microclimatic modelling	132701
Lu, Chang / Zhang, Zhengqi / Qiang, Yakui / Zhao, Fuqiang / Wang, Dong	A hydrophobic and sustainable anti-icing sand fog seal for asphalt pavement: Its preparation and characterization	132918
Liu, Yuqing / Ding, Weijian / Dong, Peng / Okude, Nobuhiro / Asaue, Hisafumi / Shiotani, Tomoki	Identification of hydration stages: An innovative study of ultrasonic coda waves using integrated sensing element (ISE)	132764
Li, Lin / Ye, Tong / Li, Yizheng / Wang, Zhen / Feng, Zhe / Liu, Zhuangzhuang	Improvement of microporous structure and impermeability of cement mortars using fly ash and blast furnace slag under low curing pressures	132890
Shahat, M. Abdelhamid / Ahmed, Yasser M. Z. / Ghitas, Ahmed / El‑Shater, Abdel‑Hamid / Soliman, Wafaa	Improving the thermophysical aspects of innovative clay brick composites for sustainable development via TiO2 and rGO nanosheets	132981
Yang, Peijian / Tian, Wenling / Qing, Longbang	In-plane shear behavior of brick masonry walls strengthened with basalt textile-reinforced concrete	132732
Yang, Shuoyong / Luo, Peng / Wu, Yue	The influence of climatic factors on the sublimation and mechanical properties of paper fiber reinforced ice as building envelope	132967
Xu, Haiqin / Wu, Shaopeng / Chen, Anqi / Li, Zhenpeng / Zou, Yingxue / Cui, Peide	Influence of hybrid fibers on rheological properties of asphalt binders and its prediction with computing techniques	132904
Lu, Xiang / Tian, Ya / Jiskani, Izhar Mithal / Zhou, Wei / Zhao, Binyu / Ding, Xiaohua / Ao, Zhongchen	Innovate geopolymer synthesis for green mine road construction: Analysis of efflorescence behavior and strength analysis	132963
Zhang, Li / Sun, Luyi / Guan, Xuemao / Liu, Songhui	Insight into carbonation reactivity of polycrystalline CS by DFT simulation	133008
Karkoodi, Sadaf / Karampour, Hassan / Lyu, Chunhao / Gilbert, Benoit P. / McGavin, Robert L. / Gunalan, Shanmuganathan / Ghanbari-Ghazijahani, Tohid	An investigation of a novel wood fibre-filled steel tubular (FFST) systems for construction	132939
Zhang, Yao / Sang, Tianyi / Kang, Aihong / Wang, Benshuai / Wu, Xing / Zhao, Yulong	Investigation of fiber length distribution on crack resistance mechanism of basalt fiber asphalt mixture based on digital image processing technology	132753
Zhao, Qingxin / Shi, Yuxuan / Xue, Caihong / Jia, Yali / Guo, Weichao / Wang, Di / Wang, Shuai / Gao, Yongshuai	Investigation of various curing methods on the properties of red mud-calcium carbide slag-based artificial lightweight aggregate ceramsite fabricated through alkali-activated cold-bonded pelletization technology	132956
Ju, Zihao / Ge, Dongdong / Lv, Songtao / Xue, Yanhua / Duan, Defeng / Deng, Yajun / Chen, Jiafu	Investigation on fatigue characteristics of polyphosphoric acid modified high dosage bio-asphalt mixture under three-dimensional stress state	132749
Abdelmagid, Alaaeldin A. A. / Qiu, Yanjun / Yang, Enhui	Laboratory investigation of the impact of peanut husk ash as an asphalt binder modifier on physical and rheological properties	132920
Yu, Miao / Yang, Zhi / You, Zhanping / Luo, Yansheng / Li, Jue / Yang, Liming	Laboratory investigation of traffic effect on the long-term skid resistance of asphalt pavements	132642
Chen, Huayan / Wang, Fengxuan / Luo, Caisong / Yang, Mianyue / Fu, Chaojiang / Wang, Bizhen / Lin, Youfeng	Lateral impact test and inertial force of concrete-filled steel tube column	132928
Han, Lei / Liao, Yingying / Wang, Haoyu / Zhang, Hougui	Long-term prediction for railway track geometry based on an optimised DNN method	132687
Jiang, Kaidi / Wang, Xin / Ding, Lining / Chen, Zhiyuan / Huang, Huang / Liu, Xia / Liu, Jianxun / Wu, Zhishen	Mechanical properties of multi-scale mono/hybrid non-metallic fiber-reinforced ultra-high performance seawater sea-sand concrete	132922
Abd Ellatief, Mohamed / Abadel, Aref A. / Federowicz, Karol / Abd Elrahman, Mohamed	Mechanical properties, high temperature resistance and microstructure of eco-friendly ultra-high performance geopolymer concrete: Role of ceramic waste addition	132677
Xie, Huijun / Liu, Yizhou / Long, Zhengwu / Xu, Fu / You, Lingyun / Tang, Xianqing / Zhu, Chongzheng / Ding, Yanhuai	Micro-characterization of the adhesion properties and mechanisms at the asphalt-silica aggregate interface under combined thermal-oxygen aging and chloride salt erosion	132818
Ismail, Abdulmalik / Wang, Jialai / Salami, Babatunde Abiodun / Oyedele, Lukumon O. / Otukogbe, Ganiyu K.	Microencapsulated phase change materials for enhanced thermal energy storage performance in construction materials: A critical review	132877
Gu, Yushan / Machner, Alisa / De Weerdt, Klaartje / Šajna, Aljoša / Hanzic, Lucija / Müller, Arnaud / Bary, Benoît	Modeling the durability of novel cementitious materials prepared with CEM II/C-M exposed to drying and carbonation	132625
Mardmomen, Seyednavid / Chen, Hung-Liang (Roger)	Modeling the thermal and mechanical properties of early age concrete containing ground granulated blast furnace slag	132902
Dahal, Mandip / Park, Sungwoo / Pyo, Sukhoon	A modified approach for measuring the air permeability of ultra-high performance concrete (UHPC) under vacuum conditions	132933
Heydari, Soheil / Hajimohammadi, Ailar / Haji Seyed Javadi, Nioushasadat / Jeremy Kien Chung Ng, James / Emmanuel Kypreos, John / Khalili, Nasser	Modified asphalt by coffee cup Fibres: An optimum mix design using response surface method	133005
Zhu, Yimeng / Li, Wugang / Liu, Wenhua / Yang, Lanlan / Wang, Long	A new approach to improving the water resistance of MOC-solidified sludge using HCO3	132959
Wang, Lusong / Cao, Min / Li, Xianbo / Du, Weifan / Wang, Xianchen	A novel approach for improving the water resistance of gypsum plaster by internal mixing hypromellose and external coating waterproofing agent	132940
Shao, Wei / Li, Qingming / Zhang, Wenbing / Shi, Danda / Li, Hanhan	Numerical modeling of chloride diffusion in cement-based materials considering calcium leaching and external sulfate attack	132913
Wu, Zhengda / Ge, Dongdong / Ju, Zihao / Xue, Yanhua	The performance evaluation of extracted asphalt binder from dry process produced rubber modified asphalt mixture	131864
Yang, Dong / Li, Haitao / Hong, Chaokun / Lorenzo, Rodolfo	Performance of single-bolted laminated flattened-bamboo connection with steel plate under compression parallel to grain – An experimental and numerical study	132774
Yang, Pan / Liu, Lang / Suo, Yonglu / Xie, Geng / Sun, Weiji / Zhang, Caixin	Physical-chemical coupling excitation of low activity coal gasification slag solid waste and its application as a backfill cementitious material	132973
Günay, Taylan / Katanalp, Burak Yiğit / Taştan, Murat / Ahmedzade, Perviz	A posterior hybrid ML optimization to analyze the relationship between high temperature rheological factors of the Superpave PG and improved PG + asphalt specifications	132803
Wang, Xiaodong / Zeng, Jingyi / Qin, Changjin / Tang, Dingding / Yang, Jin / Zhao, Huang / Zhou, Yan / Ye, Hualiang / Zheng, Bijuan / He, Xingyang	Potential industrial approach for efficient dispersion of silica fume: Rapid wet-grinding dispersion technique	132893
Tanash, Alaa Omar / Muthusamy, Khairunisa / Yahaya, Fadzil Mat / Ismail, Mohamed A.	Potential of recycled powder from clay Brick, sanitary Ware, and concrete waste as a cement substitute for Concrete: An overview	132760
Wei, Shihua / Zheng, Keren / Chen, Lou / Zuo, Shenghao / Zhou, Xiaofeng	The prediction of alkali-silica reaction based on the alkali-Al ratio of pore solution using thermodynamic modeling	132929
Salehi, Safoura / Arashpour, Mehrdad / Golafshani, Emadaldin Mohammadi / Kodikara, Jayantha	Prediction of rheological properties and ageing performance of recycled plastic modified bitumen using Machine learning models	132728
Hu, Nanyan / Liu, Yujie / Ke, Lihua / Ye, Yicheng / Jia, Jinpeng / Sun, Zhenhao / Chen, Dunxi	Preparation and frothing mechanism of froth concrete based on solid waste: A review	132831
Wang, Yingbin / Wang, Jiafei / Wu, Yejun / Li, Yang / He, Xingyang / Su, Ying / Strnadel, Bohumír	Preparation of sustainable ultra-high performance concrete (UHPC) with ultra-fine glass powder as multi-dimensional substitute material	132857
Cai, Qiang / Li, Peizhen / Luo, Jingjing / Feng, Jiahui / Wu, Kai / Xu, Linglin	Production of green autoclaved bricks from waste quarry sludge: Mechanical and microstructural aspects	132874
Sadeghi, J. / Vasheghani, M. / Khajehdezfuly, A.	Propagation of structure-borne noise in building adjacent to subway lines	132765
Al-Taie, Asmaa / Yaghoubi, Ehsan / Gmehling, Ernie / Fragomeni, Sam / Disfani, Mahdi / Guerrieri, Maurice	Recycled aggregate blends for backfilling deep trenches in trafficable areas	132942
Zeng, Lan / Wu, Liqi / Li, Boqin / Fang, Shu / Mohamed, Hazem Samih / Fang, Zhuangcheng / Yuan, Hong	Recycled aggregate concrete-filled steel tube columns with small-diameter circular FRP-confined sea-sand concrete cores: Conceptual and experimental investigations	132853
Liu, Gang / Tang, Yanjie / Wang, Jianyun	Recycling and valorization of hydrated cement blends in mortars via semi-dry carbonation – The role of waste glass, granulated blast furnace slag and fly ash	132987
Rodulfo, Perla / Wang, Boyu / Gupta, Rishi / Sharma, Loveleen / Mukhopadhyaya, Phalguni	Relationship between electrical Conductivity, Half cell Potential, Linear polarization resistance and Macrocell current of cementitious repair materials	132733
Fu, Zhipeng / Song, Qiao / Wang, Xianfeng / Liu, Yuhong / Fang, Yuan / Xing, Feng	Repeatable self-healing with carbon sequestration function using ammonium bicarbonate	132916
Yu, Huanan / Dai, Wan / Qian, Guoping / Zhang, Chao / Ge, Jinguo / Xie, Tangxin	Research on microscopic contact characteristics of aggregates during compaction of asphalt mixtures	132678
Aivazyan, Ashot P. / Monteiro, Paulo J. M. / Kirchheim, Ana Paula / Prinz, Sebastian / Mkrtchyan, Vahram P. / Harutyunyan, Valeri S.	Residual stress on ettringite crystals in mature Type K shrinkage-compensating cement pastes	132892
Liu, Ziming / Sun, Lijun	A review of effect of compaction methods on cold recycling asphalt mixtures	132758
Fu, Yong / Qiao, Hongxia / Feng, Qiong / Chen, Kefan / Li, YanQi / Xue, Cuizhen / Zhang, Yunsheng	Review of new methods for resource utilisation of electrolytic manganese residue and its application in building materials	132901
Gutiérrez-Blandón, C. / Cuadri, A. A. / Tenorio-Alfonso, A. / Partal, P. / Navarro, F. J.	Rheological and phase behaviour of paraffin wax/bitumen blends with thermal storage characteristics	132826
Zhang, Xiuzhi / Hou, Jie / Sun, Hailong / Zhang, Chong / Huang, Jingli / Wang, Jinbang / Hou, Pengkun	Rheological property and stability of nano-silica modified self-compacting concrete with manufactured sand	132935
Xu, Q. Q. / Liu, Y. / Lin, J. Z. / Sun, X. D.	Seismic response of high-speed railway system under actions of ground motions from deterministic physics-based simulation	132775
Doostkami, Hesam / de Jesús Estacio Cumberbatch, Javier / Formagini, Sidiclei / Serna, Pedro / Roig-Flores, Marta	Self-healing capability of conventional, high-performance, and Ultra High-Performance Concrete with commercial bacteria characterized by means of water and chloride penetration	132903
Zhou, Xueyan / Zhu, Man / Ma, Biao / Li, Ning / Wang, Xiaoqing	Shape optimization of thermal shape memory epoxy resin and its mechanism for improving the self-healing of asphalt mixtures	132863
Dash, Bimalendu / Giri, Jyoti Prakash / Raju, P. Markandeya / Dora, D. T. K.	Simultaneous influence of processed cellulose acetate fiber reinforcement and recycled aggregate replacement on mechanical and durability performances of concrete	132950
Sui, Hao / Wang, Wei / Lin, Junlin / Qing Tang, Zhao / Yang, Der-Shen / Duan, Wenhui	Spatial correlation and pore morphology analysis of limestone calcined clay cement (LC3) via machine learning and image-based characterisation	132721
Pushp, Mohit / Chaudhari, Ojas Arun / Vikegard, Peter / Blomqvist, Per / Lönnermark, Anders / Nejad Ghafar, Ali / Hedenqvist, Mikael	Specific heat and excess heat capacity of grout with phase change materials using heat conduction microcalorimetry	132915
Hou, Dongshuai / Wang, Meng / Sun, Huiwen / Wang, Pan / Zhang, Jun / Wang, Muhan	Structural deterioration of calcium aluminosilicate hydrate by sulfate attack: Atomic processes of Al-Si chain breaking	132867
Du, Xiaobo / Liu, Shaohui / Lin, Hongwei / Xu, Xiuchen / Zheng, Zhixian / Zhang, Hongchao	Study on preparation technology and performance of polyethylene plastic concrete for road	132917
Huang, Xuewei / Yuan, Yilin / Ruan, Xiaohui / Zhang, Xiangcheng / Wei, Chenchen / Zhao, Jun	Study on ultra low cycle fatigue fracture behavior of Q690D high-strength steel after fire exposure	132668
Wang, Kai / Bai, Taoshuo / Xu, Jingmang / Ma, Qiantao / Wang, Ping / Chen, Rong / Qian, Yao / Li, Lu	Surface treatment of rail to enhance rolling contact fatigue and wear resistance: Combined spot laminar plasma quenching and tempering method	132832
Li, Zhihao / Zhou, Wei	Tensile behavior of UHPFRC made by a fiber orientation device with adjustable vibrational frequency	132914
Guo, Bingbing / Yu, Ruichang / Wang, Jing / Zhang, Zhidong / Wang, Yan / Niu, Ditao	Three-fold benefits of using CO2 to cure seawater sea sand concrete	132868
Abdoli, Mahshid / Mostofinejad, Davood	Torsional behavior of FRP-strengthened reinforced concrete members considering various wrapping configurations: Theoretical analysis and modeling	132636
Ting, Matthew Zhi Yeon / Li, Wentao / Yi, Yaolin	Two-phase changes in workability of sand-bentonite mixture triggered by seawater and binder during seepage cut-off wall construction in marine environment	132900
Xiao, Xi / Ho, Dion S. W. / Yang, En-Hua	The use of low alkalinity MgO-SiO2 formulation to encapsulate bacteria for self-healing concrete	132908

Informations
sur cette fiche
IssueID
70423
Publié(e) le:
02.09.2023
Modifié(e) le:
02.09.2023

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.