Composite Structures - février 2022

Publié:	février 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Choi, Eunsoo / Jeon, Jong-Su / Lee, Jong-Han	Active action of prestressing on direct tensile behavior of mortar reinforced with NiTi SMA crimped fibers	115119
Pidou-Brion, Véronique / Le Guilloux, Yann	Active yarn meshes for segmentation on X-ray computed tomography of textile composite materials at the mesoscopic scale	115084
Sako, Ryota / Aoki, Ryoma / Higuchi, Ryo / Ueda, Masahito / Urushiyama, Yuta / Yokozeki, Tomohiro	Analysis of mode II strain energy release rates in end-notched flexure tests of carbon fiber-reinforced plastic curved beams	115038
Sirach, Nicholas / Smith, Scott T. / Yu, Tao / Mostafa, Ahmed	Axial compressive behaviour of circular FRP-confined multi-tube concrete columns	114972
Mishra, Vagish D. / Mishra, Ashish / Singh, Avinash / Verma, Luv / Rajesh, G.	Ballistic impact performance of UHMWP fabric impregnated with shear thickening fluid nanocomposite	114991
Liao, JinJing / Zeng, Jun-Jie / Bai, Yu-Lei / Zhang, Lihai	Bond Behavior between GFRP Bars and High Strength and Ultra-High Strength Fiber Reinforced Seawater Sea-sand Concrete (SSC) under Pullout Loading	115013
Eltantawi, Islam / Alnahhal, Wael / El Refai, Ahmed / Younis, Adel / Alnuaimi, Nasser / Kahraman, Ramazan	Bond performance of tensile lap-spliced basalt-FRP reinforcement in high-strength concrete beams	114987
Alhajahmad, Ahmad / Mittelstedt, Christian	Buckling capacity of composite panels with cutouts using continuous curvilinear fibres and stiffeners based on streamlines	114974
Jang, Min-Su / Jang, Woo-Hyeok / Jin, Do-Hyeon / Choi, Won-Ho / Kim, Chun-Gon	Circuit-analog radar absorbing structures using a periodic pattern etched on Ni-coated glass fabric	115099
Xian, Guijun / Guo, Rui / Li, Chenggao	Combined effects of sustained bending loading, water immersion and fiber hybrid mode on the mechanical properties of carbon/glass fiber reinforced polymer composite	115060
Wang, S. / Stratford, T. / Reynolds, T. P. S.	A comparison of the influence of nonlinear and linear creep on the behaviour of FRP-bonded metallic beams at warm temperatures	115117
Zeng, Jun-Jie / Ye, Yu-Yi / Quach, Wai-Meng / Lin, Guan / Zhuge, Yan / Zhou, Jie-Kai	Compressive and transverse shear behaviour of novel FRP-UHPC hybrid bars	115001
Wei, Yang / Zhu, Chao / Miao, Kunting / Chai, Jile / Zheng, Kaiqi	Compressive behavior of rectangular concrete-filled fiber-reinforced polymer and steel composite tube columns with stress-release grooves	114984
Zhang, Hanqi / Wu, Qi / Xu, Wuke / Xiong, Ke	Damage evaluation of complex composite structures using acousto-ultrasonic detection combined with phase-shifted fiber Bragg grating and dual-frequency based data processing	115000
Liang, Chaofeng / Fu, Yangyan / Wang, Chunhui / Gao, Yueqing / Zhao, Jiangxia	Damping of rubberized recycled aggregate concrete and damping estimation of its elements by finite element analysis	114967
Hazwani, Fatin / Todo, Mitsugu	Deformation mechanism of porous composite sandwich beam for orthopaedical application under three-point bending	114983
Zhang, Yi / Sun, Long / Ren, Xin / Zhang, Xiang Yu / Tao, Zhi / Xie, Yi Min	Design and analysis of an auxetic metamaterial with tuneable stiffness	114997
Shahabad, Peiman Khandar / Anamagh, Mirmeysam Rafiei / Bediz, Bekir	Design of laminated conical shells using spectral Chebyshev method and lamination parameters	114969
Long, Shuchang / Chen, Cong / Wang, Heran / Yao, Xiaohu / Zhang, Xiaoqing	Distribution and propagation of matrix cracks within composite laminates under impact	115005
Liu, Rui / Chen, Peng-Wan / Kang, Ge / Zhu, Shun-Peng / Carpinteri, Andrea / Guo, Yan-song	Dynamic mesoscale cracking modeling of energetic composite materials in Hopkinson bar test	114989
Zhang, Yidong / Huang, Kai / Sun, Rongqing / Liao, Feng / Guo, Licheng / Zhang, Li	Effect of embedded delamination on the compression performance of carbon fiber reinforced composites	115063
Wang, Shuo / Cao, Meng / Wang, Gongdong / Cong, Fanglin / Xue, Hongqian / Meng, Qingshi / Uddin, Mohammad / Ma, Jun	Effect of graphene nanoplatelets on water absorption and impact resistance of fibre-metal laminates under varying environmental conditions	114977
Tang, Hong / Dai, Hong-Liang / Du, Yi	Effect of hygrothermal load on amplitude frequency response for CFRP spherical shell panel	114978
Ke, Yanan / Huang, Shuwei / Guo, Jinhui / Han, Chaofeng / Sun, Baozhong / Gu, Bohong	Effects of thermo-oxidative aging on 3-D deformation field and mechanical behaviors of 3-D angle-interlock woven composites	115116
Jena, Priyanka / Gupta, Rajesh	Estimation of delamination thickness in a multi-layered thermally thin structure by step heating thermography	114988
Yin, Han / Iannucci, Lorenzo	An experimental and finite element investigation of compression-after-impact (CAI) behaviour of biaxial carbon fibre non-crimp-fabric (NCF) based composites	115057
Abushanab, Abdelrahman / Alnahhal, Wael / Farraj, Murad	Experimental and finite element studies on the structural behavior of BFRC continuous beams reinforced with BFRP bars	114982
Hu, Changzhi / Sang, Lin / Jiang, Kai / Xing, Jianing / Hou, Wenbin	Experimental and numerical characterization of flexural properties and failure behavior of CFRP/Al laminates	115036
Tijs, B. H. A. H. / Doldersum, M. H. J. / Turon, A. / Waleson, J. E. A. / Bisagni, C.	Experimental and numerical evaluation of conduction welded thermoplastic composite joints	114964
Zhang, Qinghua / Mortazavi, Bohayra / Zhuang, Xiaoying / Aldakheel, Fadi	Exploring the mechanical properties of two-dimensional carbon-nitride polymer nanocomposites by molecular dynamics simulations	115004
Quan, Dong / Murphy, Neal / Ivanković, Alojz / Zhao, Guoqun / Alderliesten, René	Fatigue delamination behaviour of carbon fibre/epoxy composites interleaved with thermoplastic veils	114903
Guo, Chenchen / Liu, Tao / Bin, Qin / Wang, Qingshan / Wang, Ailun	Free vibration analysis of coupled structures of laminated composite conical, cylindrical and spherical shells based on the spectral-Tchebychev technique	114965
Liu, Shuo / Wang, KaiFa / Wang, Baolin / Li, Jine / Zhang, Chunwei	A geometrically nonlinear isogeometric model for multilayered microplates under thermo-mechanical load and its application to flexible organic solar cells	114912
Tumarkin, Andrey / Tyurnina, Natalya / Mukhin, Nikolay / Tyurnina, Zoya / Sinelshchikova, Olga / Gagarin, Alexander / Sapego, Eugeny / Kretser, Yriy	Glass-ceramic ferroelectric composite material BaTiO3/KFeSi for microwave applications	114992
Koshuro, Vladimir / Fomina, Marina / Fomin, Aleksandr	High-hardness carbide coatings and their production on X82WMoCrV6-5-4 steel using induction physical vapor deposition	115045
Papa, Ilaria / Manco, Emanuele / Epasto, Gabriella / Lopresto, Valentina / Squillace, Antonino	Impact Behaviour and Non Destructive Evaluation of 3d Printed Reinforced Composites	115112
Papa, Ilaria / Donadio, Federica / Langella, Antonio / Lopresto, Valentina / Russo, Pietro	Influence of the impactor mass on the dynamic behaviour of woven carbon/vinylester laminates	115089
Trauth, A. / Lohr, C. / Lallinger, B. / Weidenmann, K. A.	Interface characterization of hybrid biocompatible fiber-metal laminates after laser-based surface treatment	115054
Barouni, Antigoni / Lupton, Colin / Jiang, Chulin / Saifullah, Abu / Giasin, Khaled / Zhang, Zhongyi / Dhakal, Hom N.	Investigation into the fatigue properties of flax fibre epoxy composites and hybrid composites based on flax and glass fibres	115046
Guo, Guodong / Alam, Shah / Peel, Larry D.	An investigation of deformation and failure mechanisms of fiber-reinforced composites in layered composite armor	115125
Rimašauskas, Marius / Jasiūnienė, Elena / Kuncius, Tomas / Rimašauskienė, Rūta / Cicėnas, Vaidotas	Investigation of influence of printing parameters on the quality of 3D printed composite structures	115061
Jakubczak, Patryk / Podolak, Piotr	The issue of CAI assessment of Fibre Metal Laminates	114959
Liu, Lulu / Liu, Airong / Yang, Jie / Fu, Jiyang	Lateral-torsional buckling of functionally graded porous arches with graphene platelets reinforcements under an arbitrary radial concentrated load	114973
Xie, Junbo / Fang, Jing / Chen, Lei / Jiao, Wei / Yang, Zhi / Chen, Li	Micro-scale modeling of 3D needled nonwoven fiber preforms	114995
Sepasdar, Reza / Shakiba, Maryam	Micromechanical study of multiple transverse cracking in cross-ply fiber-reinforced composite laminates	114986
Vinciguerra, Vincenzo / Malgioglio, Giuseppe Luigi / Landi, Antonio	Modelling the Elastic Energy of a Bifurcated Wafer: a Benchmark of the Analytical Solution vs. The ANSYS Finite Element Analysis	114996
Wang, Qinyu / Senatore, Gennaro / Jansen, Kaspar / Habraken, Arjan / Teuffel, Patrick	Multi-scale experimental testing on variable stiffness and damping components for semi-active structural control	114976
Wu, Zengwen / Zhang, Zhenya / Wu, Jianguo / Liang, Jun / Ge, Jingran / Liu, Xiaoli / Fang, Guodong	A new time-frequency domain simulation method for damage accumulation and life prediction of composite thin-wall structures under random cyclic loadings	114999
Cho, J. R.	Nonlinear free vibration of functionally graded CNT-reinforced composite plates	115101
Gómez-Silva, F. / Zaera, R.	Novel Enriched Kinetic Energy continuum model for the enhanced prediction of a 1D lattice with next-nearest interactions	115003
Ekhtiyari, Amin / Shokrieh, Mahmood M.	A novel rate-dependent cohesive zone model for simulation of mode I dynamic delamination in laminated composites	114962
Li, Shipeng / Zhang, Shiguang / Li, Hao / Qin, Xuda / Wu, Xiaozhong / Gui, Linjing	Numerical and experimental investigation of fitting tolerance effects on bearing strength of CFRP/Al single-lap blind riveted joints	115022
Gao, Y. S. / Zhang, S. Q. / Zhao, G. Z. / Schmidt, R.	Numerical modeling for cantilever sandwich smart structures with partially covered constrained viscoelastic layer	114981
Huang, Yifan / Wang, Xin	On the fracture toughness testing for single-edge notched bend specimen of orthotropic materials	114970
Yao, Jianfei / Su, Yongfei / Scarpa, Fabrizio / Li, Yan	An optimization approach to design deformation patterns in perforated mechanical metamaterials using distributions of Poisson’s ratio-based unit cells	115015
Chen, Yiwei / Shan, Zhongde / Yang, Xujing / Song, Yaxing / Zou, Ailing	Preparation of CCF/PEEK filaments together with property evaluation for additive manufacturing	114975
Jalali, S. K. / Beigrezaee, M. J. / Pugno, Nicola M.	Reporting a Misunderstanding in Definition of Functionally Graded Porosity	115007
Choi, Jeong-Il / Park, Se-Eon / Nguyễn, Huy Hoàng / Lee, Yun / Lee, Bang Yeon	Resistance of hybrid layered composite panels composed of fiber-reinforced cementitious composites against high-velocity projectile impact	114993
Russo, Angela / Riccio, Aniello / Sellitto, Andrea	A robust cumulative damage approach for the simulation of delamination under cyclic loading conditions	114998
Wang, Jingze / Cui, Weicheng	Simplified hygromechanical coupling model and numerical simulation analysis of fibre reinforced composite deep-sea and underwater structures	115006
Zhang, Shun-Qi / Zhao, Ya-Fei / Wang, Xiang / Chen, Min / Schmidt, Rüdiger	Static and dynamic analysis of functionally graded magneto-electro-elastic plates and shells	114950
Cabboi, Alessandro / Harrass, Othman / Sanchez Gómez, Sergio / Luković, Mladena	Static and dynamic testing of delamination in hybrid SHCC/concrete beams	114961
Priyanka, Richa / Pitchaimani, Jeyaraj	Static stability and free vibration characteristics of a micro laminated beam under varying axial load using modified couple stress theory and Ritz method	115028
Ghannadpour, S. A. M. / Mahmoudi, M. / Hossein Nedjad, K.	Structural behavior of 3D-printed sandwich beams with strut-based lattice core: experimental and numerical study	115113
Guo, Yuqin / Chen, Zhanfu / Li, Fuzhu / Xu, Xingming / Chen, Jing / Ren, Yi / Wang, Yun	Study on formability and failure modes of steel/CFRP based FMLs consisting of carbon fiber reinforced polymer prepreg and steel sheet	114980
Arjun, K.P / de Barros, S. / Budhe, S.	Theoretical determination of elastic and flexural modulus for inter-ply and intra-ply hybrid composite material	114971
Ou, Zhihua / Xiao, Xinhui / Liu, Yang / Bu, Guobin / Li, Zhaochao	Thermal and mechanical behaviors of the composite polyhedral arches	115067
Zhang, Kun / Zhao, Da / Chen, Wei / Zheng, Liangang / Yao, Lan / Qiu, Yiping / Xu, Fujun	Three-dimensional woven structural glass fiber/polytetrafluoroethylene (PTFE) composite antenna with superb integrity and electromagnetic performance	115096
Dorduncu, Mehmet / Kutlu, Akif / Madenci, Erdogan	Triangular C0 continuous finite elements based on refined zigzag theory {2,2} for free and forced vibration analyses of laminated plates	115058
Wu, Tianmei / Wang, Guannan / Wang, Jinfeng / Wang, Yun / Xu, Rongqiao	Variational Principles of Laminated Plates Considering Interlayer Slip	114937
Zhang, Ying / Shi, Dongyan	Vibration analysis of laminated composite coupled double cylindrical shell-annular-rectangular plate system	115020

Informations
sur cette fiche
IssueID
60262
Publié(e) le:
18.12.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - février 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - février 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.