Qingxin Zhao 
- (2024): Preparation of calcium sulphoaluminate cement-Portland cement-gypsum based sleeve grouting material: Performance optimization and tensile properties of sleeve connector. Dans: Construction and Building Materials, v. 418 (mars 2024).
- (2024): A novel coal gasification coarse slag-based geopolymer: Influences of physico-chemical coupling activation on its properties, microstructure, and hazardous material immobilization. Dans: Construction and Building Materials, v. 420 (mars 2024).
- (2024): Preparation and mix proportion optimization of red mud-fly ash-based cementitious material synergistic activated by carbide slag and MSWIFA. Dans: Construction and Building Materials, v. 415 (février 2024).
- (2023): Performance deterioration of municipal solid waste incineration fly ash-based geopolymer under sulfuric acid attack. Dans: Construction and Building Materials, v. 391 (août 2023).
- (2023): Strength formation mechanism and curing system optimization of low-carbon cementitious materials prepared by synergistic activation of multiple alkaline solid wastes. Dans: Construction and Building Materials, v. 402 (octobre 2023).
- (2023): Preparation of foam concrete from solid wastes: Physical properties and foam stability. Dans: Construction and Building Materials, v. 408 (décembre 2023).
- (2023): Properties and mechanism of Cu(OH)2 nanoarray reinforced cement composites. Dans: Construction and Building Materials, v. 408 (décembre 2023).
- (2024): Whole solid waste inorganic lightweight material: Preparation and effects of various parameters on its properties. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2024): Preparation of low-carbon and environmentally friendly non-sintered ceramsite (NSC) employing steel slag, GGBS and fly ash: Experiment and performance regulation. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2023): A numerical framework for the ITZ percolation, effective fraction and diffusivity of concrete systems considering the nonuniform ITZ. Dans: Journal of Building Engineering, v. 77 (octobre 2023).
- (2023): Triaxial compression failure criterion and constitutive relation of concrete containing multiple solid wastes. Dans: Construction and Building Materials, v. 386 (juillet 2023).
- (2023): A novel binder prepared from municipal solid waste incineration fly ash and phosphogypsum. Dans: Journal of Building Engineering, v. 71 (juillet 2023).
- (2023): Preparation and characterization of mortar specimens based on municipal solid waste incineration fly ash-activated slag. Dans: Journal of Building Engineering, v. 69 (juin 2023).
- (2022): Strength development and microstructure of sustainable geopolymers made from alkali-activated ground granulated blast-furnace slag, calcium carbide residue, and red mud. Dans: Construction and Building Materials, v. 356 (novembre 2022).
- : Preparation and properties of ultra-high performance lightweight concrete. Dans: Magazine of Concrete Research.
- (2022): Mechanical properties and compressive constitutive relation of solid waste-based concrete activated by soda residue-carbide slag. Dans: Construction and Building Materials, v. 333 (mai 2022).
- (2022): Strength development and microstructure of recycled gypsum-soda residue-GGBS based geopolymer. Dans: Construction and Building Materials, v. 331 (mai 2022).
- (2022): Stress-strain behavior of low-carbon concrete activated by soda residue-calcium carbide slag under uniaxial and triaxial compression. Dans: Journal of Building Engineering, v. 55 (septembre 2022).
- (2022): Study on the kinetic characteristics of indoor air pollutants removal by ventilation. Dans: Building and Environment, v. 207 (janvier 2022).
- (2021): Mesomechanical creep model of fly ash-contained cement mortar considering the interfacial transition zone and its influential factors. Dans: Construction and Building Materials, v. 308 (novembre 2021).
- (2021): Mechanical performance and microstructure improvement of soda residue–carbide slag–ground granulated blast furnace slag binder by optimizing its preparation process and curing method. Dans: Construction and Building Materials, v. 302 (octobre 2021).
- (2021): A new analytical solution of vibration response of orthotropic composite plates with two adjacent edges rotationally-restrained and the others free. Dans: Composite Structures, v. 266 (juin 2021).
- (2020): Removal of formaldehyde in urban office building by the integration of ventilation and photocatalyst-coated window. Dans: Sustainable Cities and Society, v. 55 (avril 2020).
- (2018): The use of the interval Pareto sorting method in simulation-based design of an indoor environment. Dans: Science and Technology for the Built Environment, v. 24, n. 4 (mars 2018).
- (2021): Mechanical properties and microstructure of binding material using slag-fly ash synergistically activated by wet-basis soda residue-carbide slag. Dans: Construction and Building Materials, v. 269 (février 2021).
- (2020): Study on frost resistance and vegetation performance of seashell waste pervious concrete in cold area. Dans: Construction and Building Materials, v. 265 (décembre 2020).
- (2020): Optimal design of building environment with hybrid genetic algorithm, artificial neural network, multivariate regression analysis and fuzzy logic controller. Dans: Building and Environment, v. 175 (mai 2020).
Structurae coopère avec
