Yue Yin
- (2024): Calibration of GTN model for fracture analysis of steel plates with holes. Dans: Journal of Constructional Steel Research, v. 215 (avril 2024).
- (2024): Characterization of Mechanical Properties of Welds of Q355D Steel by DSI Technique. Dans: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (mars 2024).
- (2024): Effects of Temperature Drop on Ultralow Cycle Fatigue of G20Mn5QT Cast Steel. Dans: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (mars 2024).
- (2023): OPV-PCM-ETFE foils in use for public buildings: electrical performance and thermal characteristics. Dans: Journal of Building Engineering, v. 71 (juillet 2023).
- (2024): Behaviour of axially-restrained slender steel tubes exposed to fire. Dans: Journal of Constructional Steel Research, v. 212 (janvier 2024).
- (2023): Thermal Simulation and Fracture Resistance Evaluation of Coarse-Grain Heat-Affected Zone in Welds of Q355D Steel. Dans: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (octobre 2023).
- (2023): Experimental study on the calcium carbonate production rates and crystal size of EICP under multi-factor coupling. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2023): Comparative Study of the Effects of Natural and Synthetic Fibers on the Mechanical Properties of Sand Treated with Enzyme-Induced Calcium Carbonate Precipitation. Dans: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (mai 2023).
- (2023): Predictive modeling of loader's working resistance measurement based on multi-sourced parameter data. Dans: Automation in Construction, v. 149 (mai 2023).
- (2022): A Simplified Strategy to Address Effects of the Drop of Temperature on the Gurson-Tvergaard-Needleman Model for G20Mn5QT Cast Steels. Dans: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 11 (novembre 2022).
- (2022): A New Micromechanical Criterion for Ductile Fracture of G20Mn5QT Cast Steels Under Shear Stress. Dans: International Journal of Steel Structures, v. 22, n. 5 (septembre 2022).
- (2022): Enzyme-induced carbonate precipitation (EICP) combined with lignin to solidify silt in the Yellow River flood area. Dans: Construction and Building Materials, v. 339 (juillet 2022).
- (2020): LMDI Model-Based Analysis of Direct Carbon Emission Accounting and Influencing Factors of China’s Building industry. Dans: IOP Conference Series: Materials Science and Engineering, v. 768, n. 5 (1 mars 2020).
- (2022): Cyclic constitutive models for G20Mn5QT cast steel at low temperatures. Dans: Journal of Constructional Steel Research, v. 193 (juin 2022).
- (2021): Effect of Carbon Source on Biological Nutrient Removal in an Anaerobic, Hypoxic, Anoxic, or Aerobic Sequencing Batch Reactor. Dans: Journal of Environmental Engineering (ASCE), v. 147, n. 12 (décembre 2021).
- (2022): Material Parameters in the GTN Model for Ductile Fracture Simulation of G20Mn5QT Cast Steels. Dans: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 1 (janvier 2022).
- (2022): Thermal environment analysis of enclosed dome with double-layered PTFE fabric roof integrated with aerogel-glass wool insulation mats: On-site test and numerical simulation. Dans: Energy and Buildings, v. 254 (janvier 2022).
- (2021): Fire-Induced Failure of Long-Term Service and Fresh Concrete Beams Subjected to Fire. Dans: KSCE Journal of Civil Engineering, v. 25, n. 10 (juillet 2021).
- (2020): Photothermal-structural-fluid behaviors of PV-ETFE cushion roof in summer: Numerical analysis using three-dimensional multiphysics model. Dans: Energy and Buildings, v. 228 (décembre 2020).
- (2020): Building performance monitoring and analysis of a large-span aerogel-membrane airport terminal. Dans: Engineering Structures, v. 219 (septembre 2020).
- (2020): Material parameters in void growth model for G20Mn5QT cast steel at low temperatures. Dans: Construction and Building Materials, v. 243 (mai 2020).
- (2020): Material Parameters in Void Growth Model for G20Mn5QT Cast Steel: Calibration and Verification. Dans: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (mars 2020).
- (2006): Axisymmetric Nonlinear Stability of a Shallow Conical Shell with a Spherical Cap of Arbitrary Variable Shell Thickness. Dans: Journal of Engineering Mechanics (ASCE), v. 132, n. 10 (octobre 2006).
- (2019): Ductile Fracture Analysis of Welded Hollow Spherical Joints Subjecting Axial Forces with Micromechanical Fracture Models. Dans: International Journal of Steel Structures, v. 19, n. 6 ( 2019).
- (2018): Stress concentration factor for tubular CHS-to-RHS Y-joints under axial loads. Dans: Journal of Constructional Steel Research, v. 148 (septembre 2018).
- (2016): Fatigue behaviour of G20Mn5QT cast steel and butt welds with Q345B steel. Dans: International Journal of Steel Structures, v. 16, n. 1 ( 2016).
- (2009): Study on the Accuracy of Response Spectrum Method for Long-span Reticulated Shells. Dans: International Journal of Space Structures, v. 24, n. 1 (mars 2009).
- (2018): Structural Behaviour of an Assembled Steel Joint Composed of CHS KK-Joint and Doubler Plate for Connection with Steel Tensile Rods. Dans: International Journal of Steel Structures, v. 18, n. 2 ( 2018).
- (2017): Electrical, thermal and mechanical properties of organic photovoltaic cells for buildings integrated photovoltaics (BIPV). Présenté pendant: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae coopère avec
