0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

H. H. Snijder

La bibliographie suivante contient toutes les publications répertoriées dans la base de données qui sont reliées à ce nom en tant qu'auteur, éditeur ou collaborateur.

  1. Shahiditabar, Akbar / Moharrami, Hamid / Snijder, H. H. (2022): Quantification of seismic performance factors of self-centered y-shaped braced frames. Dans: Journal of Constructional Steel Research, v. 194 (juillet 2022).

    https://doi.org/10.1016/j.jcsr.2022.107304

  2. Dijkstra, Onno D. / Snijder, H. H. / van Rongen, H. J. M. (1990): Assessment of the remaining fatigue life of defective welded joints. Présenté pendant: IABSE Workshop: Remaining Fatigue Life of Steel Structures, Lausanne, Switzerland, 1990.

    https://doi.org/10.5169/seals-45715

  3. Snijder, H. H. / Rolf, F. H. (1996): Comparative research to establish load factors for railway bridges. Présenté pendant: IABSE Colloquium: Basis of Design and Actions on Structures - Background and application of Eurocode 1, Delft, The Netherlands, 1996.

    https://doi.org/10.5169/seals-56094

  4. Maljaars, J. / Soetens, F. / Snijder, H. H. (2009): Local buckling of aluminium structures exposed to fire. Dans: Thin-Walled Structures, v. 47, n. 11 (novembre 2009).

    https://doi.org/10.1016/j.tws.2008.06.003

  5. Hoenderkamp, J. C. D. / Snijder, H. H. / Hofmeyer, H. (2015): Racking shear resistance of steel frames with corner connected precast concrete infill panels. Dans: Steel and Composite Structures, v. 19, n. 6 (décembre 2015).

    https://doi.org/10.12989/scs.2015.19.6.1403

  6. Teeuwen, P. A. / Kleinman, C. S. / Snijder, H. H. / Hofmeyer, H. (2010): Experimental and numerical investigations into the composite behaviour of steel frames and precast concrete infill panels with window openings. Dans: Steel and Composite Structures, v. 10, n. 1 (janvier 2010).

    https://doi.org/10.12989/scs.2010.10.1.001

  7. Snijder, H. H. / Bijlaard, F. S. K. (1985): The influence of end restraints on the maximum strength of centrally loaded steel columns in braced frames. Dans: Journal of Constructional Steel Research, v. 5, n. 2 (janvier 1985).

    https://doi.org/10.1016/0143-974x(85)90011-2

  8. Verstappen, I. / Snijder, H. H. / Bijlaard, F. S. K. / Steenbergen, H. M. G. M. (1998): Design rules for steel arches—In-plane stability. Dans: Journal of Constructional Steel Research, v. 46, n. 1-3 (avril 1998).

    https://doi.org/10.1016/s0143-974x(98)00022-4

  9. van Keulen, D. C. / Nethercot, D. A. / Snijder, H. H. / Bakker, M. C. M. (2003): Frame analysis incorporating semi-rigid joint action: Applicability of the half initial Secant stiffness approach. Dans: Journal of Constructional Steel Research, v. 59, n. 9 (septembre 2003).

    https://doi.org/10.1016/s0143-974x(03)00031-2

  10. Hofmeyer, H. / Kerstens, J. G. M. / Snijder, H. H. / Bakker, M. C. M. (2002): Combined web crippling and bending moment failure of first-generation trapezoidal steel sheeting. Dans: Journal of Constructional Steel Research, v. 58, n. 12 (décembre 2002).

    https://doi.org/10.1016/s0143-974x(02)00004-4

  11. Snijder, H. H. / Hoenderkamp, J. C. D. (2008): Influence of end plate splices on the load carrying capacity of columns. Dans: Journal of Constructional Steel Research, v. 64, n. 7-8 (juillet 2008).

    https://doi.org/10.1016/j.jcsr.2008.01.020

  12. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2011): Finite element simulations of residual stresses in roller bent wide flange sections. Dans: Journal of Constructional Steel Research, v. 67, n. 1 (janvier 2011).

    https://doi.org/10.1016/j.jcsr.2010.07.004

  13. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2010): Experimental investigation of residual stresses in roller bent wide flange steel sections. Dans: Journal of Constructional Steel Research, v. 66, n. 6 (juin 2010).

    https://doi.org/10.1016/j.jcsr.2010.01.017

  14. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2011): Proposed residual stress model for roller bent steel wide flange sections. Dans: Journal of Constructional Steel Research, v. 67, n. 6 (juin 2011).

    https://doi.org/10.1016/j.jcsr.2011.01.009

  15. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2012): Mechanical properties of roller bent wide flange sections — Part 2: Prediction model. Dans: Journal of Constructional Steel Research, v. 68 (janvier 2012).

    https://doi.org/10.1016/j.jcsr.2011.07.005

  16. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2012): Mechanical properties of roller bent wide flange sections — Part 1: Experimental investigation. Dans: Journal of Constructional Steel Research, v. 68 (janvier 2012).

    https://doi.org/10.1016/j.jcsr.2011.07.003

  17. La Poutré, D. B. / Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2013): Out-of-plane stability of roller bent steel arches — An experimental investigation. Dans: Journal of Constructional Steel Research, v. 81 (février 2013).

    https://doi.org/10.1016/j.jcsr.2012.11.004

  18. Spoorenberg, R. C. / Snijder, H. H. / Cajot, L.-G. / May, M. S. (2013): Experimental investigation on residual stresses in heavy wide flange QST steel sections. Dans: Journal of Constructional Steel Research, v. 89 (octobre 2013).

    https://doi.org/10.1016/j.jcsr.2013.06.009

  19. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. / Beg, D. (2012): Design rules for out-of-plane stability of roller bent steel arches with FEM. Dans: Journal of Constructional Steel Research, v. 79 (décembre 2012).

    https://doi.org/10.1016/j.jcsr.2012.07.027

  20. Spoorenberg, R. C. / Snijder, H. H. / Cajot, L.-G. / Popa, N. (2014): Buckling curves for heavy wide flange QST columns based on statistical evaluation. Dans: Journal of Constructional Steel Research, v. 101 (octobre 2014).

    https://doi.org/10.1016/j.jcsr.2014.05.017

  21. Spoorenberg, R. C. / Snijder, H. H. / Hoenderkamp, J. C. D. (2013): Plastic Collapse Load of Crown-Hinged Steel Circular Arches: A Theoretical Method. Dans: Advances in Structural Engineering, v. 16, n. 4 (avril 2013).

    https://doi.org/10.1260/1369-4332.16.4.721

  22. Hoenderkamp, J. C. D. / Snijder, H. H. / Hofmeyer, H. (2012): High-Rise Structures with Belt Bracing Subject to Lateral Load. Dans: Advances in Structural Engineering, v. 15, n. 1 (janvier 2012).

    https://doi.org/10.1260/1369-4332.15.1.65

  23. Delrue, S. F. / Snijder, H. H. / Bijlaard, F. S. K. / Steenbergen, H. M. G. M. (1999): Out-of-Plane Inelastic Buckling and Strength of Steel Arches. Dans: Journal of Structural Engineering (ASCE), v. 125, n. 3 (mars 1999).

    https://doi.org/10.1061/(asce)0733-9445(1999)125:3(352)

  24. Hoenderkamp, J. C. D. / Snijder, H. H. (2003): Preliminary Analysis of High-Rise Braced Frames with Facade Riggers. Dans: Journal of Structural Engineering (ASCE), v. 129, n. 5 (mai 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:5(640)

  25. Maljaars, J. / Soetens, F. / Snijder, H. H. (2010): Local Buckling of Fire-Exposed Aluminum Members: New Design Model. Dans: Journal of Structural Engineering (ASCE), v. 136, n. 1 (janvier 2010).

    https://doi.org/10.1061/(asce)st.1943-541x.0000091

  26. Snijder, H. H. (2018): Effective second moment of area of uniform built-up members. Dans: Stahlbau, v. 87, n. 4 (avril 2018).

    https://doi.org/10.1002/stab.201810586

  27. Snijder, H. H. / van der Aa, R. P. / Hofmeyer, H. / van Hove, B. W. E. M. (2018): Lateral torsional buckling design imperfections for use in non-linear FEA. Dans: Steel Construction, v. 11, n. 1 (février 2018).

    https://doi.org/10.1002/stco.201810015

  28. da Silva, Luís Simões / Tankova, Trayana / Marques, Liliana / Kuhlmann, Ulrike / Kleiner, Andreas / Spiegler, Jennifer / Snijder, H. H. / Dekker, Rianne / Taras, Andreas / Popa, Nicoleta (2017): 13.02: Safety assessment across modes driven by plasticity, stability and fracture. Dans: ce/papers, v. 1, n. 2-3 (septembre 2017).

    https://doi.org/10.1002/cepa.425

  29. Snijder, H. H. / Dekker, R. W. A. / Teeuwen, P. A. (2017): 13.01: Net cross-section failure of steel plates at bolt holes: Numerical work and statistical assessment of design rules. Dans: ce/papers, v. 1, n. 2-3 (septembre 2017).

    https://doi.org/10.1002/cepa.424

  30. Hoenderkamp, J. C. D. / Snijder, H. H. (2000): Approximate analysis of high-rise frames with flexible connections. Dans: The Structural Design of Tall Buildings, v. 9, n. 3 ( 2000).

    https://doi.org/10.1002/1099-1794(200006)9:3<233::aid-tal156>3.0.co;2-o

Rechercher une publication...

Disponible seulement avec
Mon Structurae

Texte intégral
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine