Shazim Ali Memon 
- (2024): Predictive Modeling and Experimental Validation for Assessing the Mechanical Properties of Cementitious Composites Made with Silica Fume and Ground Granulated Blast Furnace Slag. Dans: Buildings, v. 14, n. 4 (27 mars 2024).
- (2023): Novel indicators to evaluate PCM performance under different ventilation strategies by considering the impact of climate change. Dans: Journal of Building Engineering, v. 74 (septembre 2023).
- (2023): Study on the non-uniformity of rust layer and residual rebar caused by pitting corrosion in mortar. Dans: Construction and Building Materials, v. 406 (novembre 2023).
- (2023): Utilizing the Fanger thermal comfort model to evaluate the thermal, energy, economic, and environmental performance of PCM-integrated buildings in various climate zones worldwide. Dans: Energy and Buildings, v. 297 (octobre 2023).
- (2023): Forecasting energy demand of PCM integrated residential buildings: A machine learning approach. Dans: Journal of Building Engineering, v. 70 (juillet 2023).
- (2023): Sensitivity analysis and optimization of PCM integrated buildings in a tropical savanna climate. Dans: Journal of Building Engineering, v. 64 (avril 2023).
- (2022): Use of Processed Sugarcane Bagasse Ash in Concrete as Partial Replacement of Cement: Mechanical and Durability Properties. Dans: Buildings, v. 12, n. 10 (20 septembre 2022).
- (2022): A Review of Improvement of Interfacial Transition Zone and Adherent Mortar in Recycled Concrete Aggregate. Dans: Buildings, v. 12, n. 10 (20 septembre 2022).
- (2022): Influence of initial defects on the degradation of steel reinforced mortar exposed to cyclic wetting and drying environment based on 3D scanning. Dans: Construction and Building Materials, v. 325 (mars 2022).
- (2021): Methods of accelerating chloride-induced corrosion in steel-reinforced concrete: A comparative review. Dans: Construction and Building Materials, v. 289 (juin 2021).
- (2022): Glass fiber reinforced gypsum composites with microencapsulated PCM as novel building thermal energy storage material. Dans: Construction and Building Materials, v. 340 (juillet 2022).
- (2021): Strength, Hydraulic, and Microstructural Characteristics of Expansive Soils Incorporating Marble Dust and Rice Husk Ash. Dans: Advances in Civil Engineering, v. 2021 (janvier 2021).
- (2021): Machine Learning-Based Modeling with Optimization Algorithm for Predicting Mechanical Properties of Sustainable Concrete. Dans: Advances in Civil Engineering, v. 2021 (janvier 2021).
- (2021): Punching Shear Strength Model for Reinforced Concrete Flat Plate Slab–Column Connection without Shear Reinforcement. Dans: Journal of Structural Engineering (ASCE), v. 147, n. 3 (mars 2021).
- (2012): Verification and application of continuous surface temperature monitoring technique for investigation of nocturnal sensible heat release characteristics by building fabrics. Dans: Energy and Buildings, v. 53 (octobre 2012).
- (2013): Utilization of waste glass powder for latent heat storage application in buildings. Dans: Energy and Buildings, v. 66 (novembre 2013).
- (2013): Preparation, characterization and thermal properties of dodecanol/cement as novel form-stable composite phase change material. Dans: Energy and Buildings, v. 66 (novembre 2013).
- (2019): Influence of Acceleration Approaches on the Corrosion Behavior of Embedded Steel in Mortar. Dans: Advances in Civil Engineering Materials, v. 8, n. 3 (mars 2019).
- (2009): Production of low cost self compacting concrete using bagasse ash. Dans: Construction and Building Materials, v. 23, n. 2 (février 2009).
- (2011): Utilization of Rice Husk Ash as viscosity modifying agent in Self Compacting Concrete. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2012): Microstructure and reactivity of rich husk ash. Dans: Construction and Building Materials, v. 29 (avril 2012).
- (2012): Utilization of Pakistani bentonite as partial replacement of cement in concrete. Dans: Construction and Building Materials, v. 30 (mai 2012).
- (2013): Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures. Dans: Construction and Building Materials, v. 38 (janvier 2013).
- (2013): Qualitative and quantitative analysis and identification of flaws in the microstructure of fly ash and metakaolin blended high performance concrete after exposure to elevated temperatures. Dans: Construction and Building Materials, v. 38 (janvier 2013).
- (2014): The performance of Fly ash and Metakaolin concrete at elevated temperatures. Dans: Construction and Building Materials, v. 62 (juillet 2014).
- (2016): Nondestructive test methods for concrete bridges: A review. Dans: Construction and Building Materials, v. 107 (mars 2016).
- (2017): Investigating drying behavior of cement mortar through electrochemical impedance spectroscopy analysis. Dans: Construction and Building Materials, v. 135 (mars 2017).
- (2017): Recent research on cold-formed steel beams and columns subjected to elevated temperature: A review. Dans: Construction and Building Materials, v. 144 (juillet 2017).
- (2017): Three-dimensional characterization of steel corrosion embedded in cement paste. Dans: Construction and Building Materials, v. 143 (juillet 2017).
- (2017): Retrofitting of Full-Scale Confined Masonry Building Using Ferro-Cement Overlay. Dans: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 5 (octobre 2017).
Structurae coopère avec
