Liang Gao 
- (2024): Comparative study of different strengthening methods for circular hollow section K-joints. Dans: Journal of Constructional Steel Research, v. 217 (juin 2024).
- (2023): Evolution of steel-mortar interface undergoing stray current. Dans: Construction and Building Materials, v. 409 (décembre 2023).
- (2024): Dynamic analysis of vibration response of track structure considering rail pads in low-temperature condition. Dans: Structures, v. 59 (janvier 2024).
- (2023): Dynamic impact behavior and notched fatigue life of GLARE laminates. Dans: Composite Structures, v. 323 (novembre 2023).
- (2016): In-situ measurement of viscoelastic properties of fresh cement paste by a microrheology analyzer. Dans: Cement and Concrete Research, v. 79 (janvier 2016).
- (2023): Experimental investigation of the quantified influence of gypsum plasterboard joints on the fire performance of cold-formed steel walls. Dans: Structures, v. 49 (mars 2023).
- (2023): Experimental study on barrier performance and durability under dry-wet cycles of fly ash based geopolymer cutoff wall backfill. Dans: Construction and Building Materials, v. 368 (mars 2023).
- (2023): Assessing the performances of parametric wind models in predicting storm surges in the Pearl River Estuary. Dans: Journal of Wind Engineering and Industrial Aerodynamics, v. 232 (janvier 2023).
- (2022): Evolution mechanism of interlayer fatigue properties of CRTS III slab track. Dans: Construction and Building Materials, v. 360 (décembre 2022).
- (2022): Design of multiphase auxetic metamaterials by a parametric color level set method. Dans: Composite Structures, v. 287 (mai 2022).
- (2022): A further understanding on the strength development of cement pastes in the presence of triisopropanolamine used in CRTS III slab track. Dans: Construction and Building Materials, v. 315 (janvier 2022).
- (2022): Deep-learning-based isogeometric inverse design for tetra-chiral auxetics. Dans: Composite Structures, v. 280 (janvier 2022).
- (2021): Failure analysis of bio-inspired corrugated sandwich structures fabricated by laser powder bed fusion under three-point bending. Dans: Composite Structures, v. 263 (mai 2021).
- (2019): Dynamic multiscale topology optimization for multi-regional micro-structured cellular composites. Dans: Composite Structures, v. 211 (mars 2019).
- (2019): Design of sandwich panels with truss cores using explicit topology optimization. Dans: Composite Structures, v. 210 (février 2019).
- (2020): Experimental study on seismic performance of steel‐reinforced recycled concrete frame with infill wall. Dans: The Structural Design of Tall and Special Buildings, v. 29, n. 10 (juillet 2020).
- (2020): Effects of Polymer Latex and Expansive Agent on the Resistance of Cement Asphalt Pastes to Sulfuric Acid Attacks. Dans: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 6 (juin 2020).
- (2020): Application of rubber mats in transition zone between two different slab tracks in high-speed railway. Dans: Construction and Building Materials, v. 243 (mai 2020).
- (2019): Improvement on the mechanical properties of CA mortar and concrete composite specimens in high-speed railway by modification of interlayer bonding. Dans: Construction and Building Materials, v. 228 (décembre 2019).
- (2016): Experimental and numerical studies on the frame-infill in-teraction in steel reinforced recycled concrete frames. Dans: Steel and Composite Structures, v. 20, n. 6 ( 2016).
- (2015): Cyclic test for beam-to-column abnormal joints in steel moment-resisting frames. Dans: Steel and Composite Structures, v. 18, n. 5 (mai 2015).
- (2014): Experimental study on mechanical performances of lattice steel reinforced concrete inner frame with irregular section columns. Dans: Steel and Composite Structures, v. 16, n. 3 (mars 2014).
- (2014): Cyclic test for solid steel reinforced concrete frames with special-shaped columns. Dans: Earthquakes and Structures, v. 7, n. 3 (septembre 2014).
- (2017): Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement. Dans: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 3 (mars 2017).
- (2019): Design of shell-infill structures by a multiscale level set topology optimization method. Dans: Computers & Structures, v. 212 (février 2019).
- (2013): An adaptive decoupling approach for reliability-based design optimization. Dans: Computers & Structures, v. 117 (février 2013).
- (2016): Characterization of the mesostructural organization of cement particles in fresh cement paste. Dans: Construction and Building Materials, v. 124 (octobre 2016).
- (2017): Effects of comb-shaped superplasticizers with different charge characteristics on the microstructure and properties of fresh cement pastes. Dans: Construction and Building Materials, v. 155 (novembre 2017).
- (2017): Homotopy method for inverse design of the bulbous bow of a container ship. Dans: China Ocean Engineering, v. 31, n. 1 (janvier 2017).
- (2018): Effect of daily changing temperature on the curling behavior and interface stress of slab track in construction stage. Dans: Construction and Building Materials, v. 185 (octobre 2018).
Structurae coopère avec
