0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Research on Improved Equivalent Diagonal Strut Model for Masonry-Infilled RC Frame with Flexible Connection

Auteur(s):





Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-18
DOI: 10.1155/2019/3725373
Abstrait:

The reinforced concrete (RC) frame with masonry infill wall is one of the most common structural systems in many countries. It has been widely recognized that the infill wall has significant effects on the seismic performance of RC frame structure. During the Wenchuan earthquake (China 2008), a lot of infilled RC frame structures suffered serious damages due to the detrimental effects brought about by the infill wall rigidly connected to the surrounding frame. In order to solve this problem, flexible connection, introduced by Chinese designers, is recommended by the updated Chinese seismic design code, because of its effect to reduce the unfavorable interaction between infill wall and frame. Although infilled RC frame structure with flexible connection has a lot of advantages, but because of the lack of research, this structure type is seldom used in practical engineering. Therefore, it is of great significance to scientifically investigate and analyze the effects of flexible connection on structure behaviors of infilled RC frame. In this study, a macrofinite element numerical simulation method for infilled RC frame with flexible connection was investigated. Firstly, the effects of connection between infill wall and surrounding frame on in-plane behaviors of infilled RC frame were discussed. Secondly, based on deeply studying the equivalent diagonal strut models for infilled RC frame with rigid connection, an improved equivalent diagonal strut model for infilled RC frame with flexible connection was proposed. Employed with inversion analysis theory, the parameter in the proposed model was estimated through artificial fish swarm algorithm. Finally, applied with the existing experiment results, a case study was conducted to verify the effectiveness and feasibility of the proposed model.

Copyright: © 2019 Guang Yang et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10310152
  • Publié(e) le:
    05.03.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine