0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Prediction of Ultimate Bearing Capacity of Pile Foundation Based on Two Optimization Algorithm Models

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 5, v. 13
Page(s): 1242
DOI: 10.3390/buildings13051242
Abstrait:

The determination of the bearing capacity of pile foundations is very important for their design. Due to the high uncertainty of various factors between the pile and the soil, many methods for predicting the ultimate bearing capacity of pile foundations focus on correlation with field tests. In recent years, artificial neural networks (ANN) have been successfully applied to various types of complex issues in geotechnical engineering, among which the back-propagation (BP) method is a relatively mature and widely used algorithm. However, it has inevitable shortcomings, resulting in large prediction errors and other issues. Based on this situation, this study was designed to accomplish two tasks: firstly, using the genetic algorithm (GA) and particle swarm optimization (PSO) to optimize the BP network. On this basis, the two optimization algorithms were improved to enhance the performance of the two optimization algorithms. Then, an adaptive genetic algorithm (AGA) and adaptive particle swarm optimization (APSO) were used to optimize a BP neural network to predict the ultimate bearing capacity of the pile foundation. Secondly, to test the performance of the two optimization models, the predicted results were compared and analyzed in relation to the traditional BP model and other network models of the same type in the literature based on the three most common statistical indicators. The models were evaluated using three common evaluation metrics, namely the coefficient of determination (R2), value account for (VAF), and the root mean square error (RMSE), and the evaluation metrics for the test set were obtained as AGA-BP (0.9772, 97.8348, 0.0436) and APSO-BP (0.9854, 98.4732, 0.0332). The results show that compared with the predicted results of the BP model and other models, the test set of the AGA-BP model and APSO-BP model achieved higher accuracy, and the APSO-BP model achieved higher accuracy and reliability, which provides a new method for the prediction of the ultimate bearing capacity of pile foundations.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10728373
  • Publié(e) le:
    30.05.2023
  • Modifié(e) le:
    01.06.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine