0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Particle Swarm Optimization of Support Vector Machine Inversion Model for Overhead Upright Piers Damage-Inducing Factor

Auteur(s):
ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2023
Page(s): 1-17
DOI: 10.1155/2023/8871629
Abstrait:

In the Three Gorges reservoir area, the overhead upright pier is the primary structural form. For intelligent monitoring of existing terminals, this research chooses Chongqing Xintian Port as the study object and proposes a support vector machine (SVM) damage-inducing factor (DIF) inversion model based on particle swarm optimization (PSO). To apply the finite element method to analyze the stress distribution characteristics of quay pile groups under three main DIFs, including the stacking effect, ship impact load effect, and bank slope effect. After characterizing the stress data, it becomes evident that there exists a correlation between stress and each DIF parameter. Before generating the training sample set, principal component analysis is employed to reduce dimensionality and eliminate a substantial amount of redundant data. The model has an accuracy of 0.999 for the identification of the type of DIF and 0.975 for the identification of the location of the action of the DIF with F1 coefficients of 0.999 and 0.978, respectively. For the strength of DIF predictions, MAE and MSE were 4.871 and 1.202, respectively, R2 was 0.986, NSE was 0.986, WI was 0.996, and PBIAS was 0.095. After extracting every sample, the relative error for the ship impact load effect is 0.05, and the highest relative error for the bank slope effect is 0.02; the error for the stacking effect is limited to 0.08. The results suggest that the damage inducement inversion model of the SVM optimized by the PSO algorithm can effectively identify the DIF of the overhead upright pier.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1155/2023/8871629.
  • Informations
    sur cette fiche
  • Reference-ID
    10752180
  • Publié(e) le:
    14.01.2024
  • Modifié(e) le:
    14.01.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine