0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Optimization of Operations of Air Purifiers for Control of Indoor PM2.5 Using BIM and CFD

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 1, v. 13
Page(s): 77
DOI: 10.3390/buildings13010077
Abstrait:

Prevention of PM2.5 is attracting increasing attention all over the world as PM2.5 can cause and exacerbate respiratory diseases. Compared with conventional natural ventilation and mechanical ventilation, air purifiers with particular filters are more efficient in the control of indoor PM2.5. Currently, there are limited studies on the operations of portable indoor air purifiers. To improve the efficiency of an air purifier in control of PM2.5, an optimal operational strategy is needed. This paper proposes a framework for the optimization of operations of air purifiers for control of indoor PM2.5 based on building information modeling (BIM) and computational fluid dynamics (CFD). A case study is conducted to validate the proposed optimization framework and the results are discussed. It can be shown from the results that the best location of the air purifier can increase efficiency by up to 33% compared with other locations.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10712679
  • Publié(e) le:
    21.03.2023
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine