0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental Study of an Industrial Tower-Type Supporting Frame with Facades Subjected to the Stationary Wind Effect

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 4, v. 13
Page(s): 866
DOI: 10.3390/buildings13040866
Abstrait:

Aerodynamic studies of canceled structures are important for design of buildings, analysis of air flows inside buildings, evaluation of buildings’ effects on air flow patterns of the adjoining area, and optimal choice of enclosing structures. The analysis of wind effects during the design of canceled structures is governed by codes and standards of general purpose. These statutory documents do not regulate the mounting procedure of wind protection screens, nor do they contain the analysis of wind effects on structures with different angles of attack of an incident wind flow. The codes prescribe aeroelastic model testing in special civil engineering wind tunnels during the design of such structures. The purpose of this research project is to analyze wind effects on the force and torque specification of a canceled structure at different wind effect angles accounting for the mounting sequence of wind protection screens. The subject of the article is an experimental aeroelastic study of wind effects on a canceled structure accounting for sequential mounting of wind protection screens on the structure’s facade. The obtained data will allow for the analysis of effects of the wind flow angle on internal forces of the structure, given that a change in its permeability is taken into account. At the initial design stage, experimental modeling of wind effects in a wind tunnel is thereby considered a structure model validation step. The relevance of the paper lies in the need to identify optimum operating conditions of canceled structures, subjected to a wind effect, to ensure safe and comfortable work of people and reliable operation of process equipment installed inside the facility.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10728353
  • Publié(e) le:
    30.05.2023
  • Modifié(e) le:
    01.06.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine