Estimation of Soil-Water Characteristic Curve for Cohesive Soils with Methylene Blue Value

This study described a new methylene blue test to measure the methylene blue value (MBV) for 15 cohesive soils and established the relationship between MBV and plasticity index (PI) and between MBV and percent passing No. 200 sieve (P₂₀₀), respectively. Thereafter, the soil-water characteristic curves (SWCCs) for 15 cohesive soils based on Fredlund and Xing's model were generated by the pressure plate test. Then, regression equations for determining the four fitting parameters in a previously developed SWCC equation by using the measured MBV were utilized to generate the SWCC for the cohesive soils. At the same time, the slope parameter,b_f, in the SWCC equations was found to be associated with the moisture susceptibility of cohesive soils. A higherb_fvalue indicates that the material is more moisture susceptible. In addition, a lower MBV/PI/P₂₀₀shows a lower suction at the same degree of saturation; on the other hand, a higher MBV/PI/P₂₀₀presents a higher suction. Therefore, the moisture-holding capacity of cohesive soils increases with increasing MBV, PI, and P₂₀₀. Finally, the proposed estimation method was validated by a comparison between the four determined fitting parameters from MBV and the pressure plate test.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.