0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Assessment of the torsional behaviour of hollow core slabs

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Bulletin of the New Zealand Society for Earthquake Engineering, , n. 2, v. 56
Page(s): 104-114
DOI: 10.5459/bnzsee.1572
Abstrait:

There are many applications in buildings in which precast pre-stressed hollow-core (HC) slabs are subjected to shear, torsion, or combined shear and torsion. Nonetheless, extruded HC units contain no transverse reinforcement, being inherently vulnerable to brittle failure modes due to shear and torsional actions. In previous work by the authors, a finite element (FE) modelling approach for HC units failing in shear was developed and validated against experimental test data. This paper aims to extend the applicability of the proposed FE approach to help improve the understanding of the torsional behavior of HC units. For this purpose, the developed model is further validated against experimental data available in the literature and then used to predict the torsional capacity of New Zealand-specific 200 mm deep HC units. Results suggest that the FE model is capable of predicting the capacity of HC slabs with and without eccentricity of the applied vertical load. Finally, the numerical results are used to evaluate the performance of available simplified analysis approaches for assessing the torsional capacity of HC units, which are found to be non-conservative if used with expected material properties.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.5459/bnzsee.1572.
  • Informations
    sur cette fiche
  • Reference-ID
    10731898
  • Publié(e) le:
    13.06.2023
  • Modifié(e) le:
    13.06.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine