Assessment of Fatigue of Structural Steels
| Auteur(s): |
J. Djubek
V. Ilanovský |
|---|---|
| Médium: | article de revue |
| Langue(s): | anglais |
| Publié dans: | Procedia Engineering, 2012, v. 40 |
| Conférence: | Steel Structures and Bridges 2012 |
| Page(s): | 148-153 |
| DOI: | 10.1016/j.proeng.2012.07.071 |
| Abstrait: | After the application of N cycles of stress range Δσ, the crack will grow from the initial to critical length according to the algebraic equation (4). The algebraic equation holds for any material, only if m>2. For structural ferritic steel, the critical length of crack is a=8mm (10), where the number of fatigue cycles is N=108 and cyclic stress range Δσ=27.5MPa. Under repeated shear loading the largest membrane and bending stresses are concentrated in the vicinity of corners of the web. The stress ranges for 106 cycles (steel and aluminium alloys) and the constants in equation of curve Δσ3.N=constant are given as follows in the fifth chapter. |
- Informations
sur cette fiche - Reference-ID
10077375 - Publié(e) le:
04.12.2017 - Modifié(e) le:
13.02.2020
Structurae coopère avec
