Case Studies in Construction Materials - juin 2018

Publié:	juin 2018

Auteur(s)	Titre	Page(s)
Rao, K. Jagannadha / Keerthi, K. / Vasam, Srinivas	Acid resistance of quaternary blended recycled aggregate concrete	423-433
Lahdensivu, Jukka / Köliö, Arto / Husaini, David	Alkali-silica reaction in Southern-Finland’s bridges	469-475
Zoccali, Pablo / Moretti, Laura / Di Mascio, Paola / Loprencipe, Giuseppe / D'Andrea, Antonio / Bonin, Guido / Teltayev, Bagdat / Caro, Silvia	Analysis of natural stone block pavements in urban shared areas	498-506
Uchaeva, T. V. / Loganina, V. I.	Analysis of the risk at the finishing of the building products and construction of paint compositions	213-216
Bumanis, Girts / Dembovska, Laura / Korjakins, Aleksandrs / Bajare, Diana	Applicability of freeze-thaw resistance testing methods for high strength concrete at extreme −52.5 °C and standard −18 °C testing conditions	139-149
Thaickavil, Nassif Nazeer / Thomas, Job	Behaviour and strength assessment of masonry prisms	23-38
Marshdi, Qosai S. Radi	Benefits of using mineral additives, as components of the modern oil-well cement	455-458
Fonna, S. / Huzni, S. / Ariffin, A. K.	Boundary element inverse analysis for rebar corrosion detection: Study on the 2004 tsunami-affected structure in Aceh	292-298
Sassani, Alireza / Ceylan, Halil / Kim, Sunghwan / Arabzadeh, Ali / Taylor, Peter C. / Gopalakrishnan, Kasthurirangan	Development of Carbon Fiber-modified Electrically Conductive Concrete for Implementation in Des Moines International Airport	277-291
Idris, Irham Hameeda Mohamad / Yusof, Nur Zulaikha	Development of low thermal mass cement-sand block utilizing peat soil and effective microorganism	8-15
S Mohammed, Bashar / Liew, Mohd Shahir / S Alaloul, Wesam / Al-Fakih, Amin / Ibrahim, Wadhah / Adamu, Musa	Development of rubberized geopolymer interlocking bricks	401-408
Kissi, Ernest / Abdulai Sadick, Mohammed / Agyemang, Daniel Yamoah	Drivers militating against the pricing of sustainable construction materials: The Ghanaian quantity surveyors perspective	507-516
Amar, Mouhamadou / Benzerzour, Mahfoud / Safhi, Amine el Mahdi / Abriak, Nor-Edine	Durability of a cementitious matrix based on treated sediments	258-276
Palanisamy, P. / Kumar, P. Suresh	Effect of molarity in geo polymer earth brick reinforced with fibrous coir wastes using sandy soil and quarry dust as fine aggregate. (Case study)	347-358
Bala, Nura / Napiah, Madzlan / Kamaruddin, Ibrahim	Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance	447-454
Meisuh, Bismark K. / Kankam, Charles K. / Buabin, Thomas K.	Effect of quarry rock dust on the flexural strength of concrete	16-22
Hou, Chaoping / Meng, Xi / Gao, Yanna / Mao, Wei / Long, Enshen	Effect of the insulation materials filling on the thermal performance of sintered hollow bricks under the air-conditioning intermittent operation	217-225
Elbar, M. / Senhadji, Y. / Benosman, A. S. / Khelafi, H. / Mouli, M.	Effect of thermo-activation on mechanical strengths and chlorides permeability in pozzolanic materials	459-468
Mohammed, Bashar S. / Adamu, Musa / Liew, Mohd Shahir	Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques	380-391
Leramo, Richard O. / Adekoya, Lawson O. / Loto, Cleophas A.	Evaluation of surface geometries and physical properties of concrete reinforcement steel rods rolled in Nigeria	150-159
Shaaban, Ibrahim G. / Seoud, Osama A.	Experimental behavior of full-scale exterior beam-column space joints retrofitted by ferrocement layers under cyclic loading	61-78
Ridha, Maha M. S. / Sarsam, Kaiss F. / Al-Shaarbaf, Ihsan A. S.	Experimental Study and Shear Strength Prediction for Reactive Powder Concrete Beams	434-446
Shaaban, Ibrahim G. / Said, Mohamed	Finite element modeling of exterior beam-column joints strengthened by ferrocement under cyclic loading	333-346
Yoshitake, Isamu / Maeda, Tomoyuki / Hieda, Masahiro	Image analysis for the detection and quantification of concrete bugholes in a tunnel lining	116-130
Sultan, Mohamed E. / Abo-El-Enein, Salah A. / Sayed, Ahmed Z. / El-Sokkary, Tarek M. / Hammad, Hamdy A.	Incorporation of cement bypass flue dust in fly ash and blast furnace slag-based geopolymer	315-322
Rahnavard, Rohola / Naghavi, Mohammad / Aboudi, Maryam / Suleiman, Mohamed	Investigating modeling approaches of buckling-restrained braces under cyclic loads	476-488
Janotka, Ivan / Bačuvčík, Michal / Paulík, Peter	Low carbonation of concrete found on 100-year-old bridges	97-115
Kiani, Behnam / Liang, Robert Y. / Gross, Jacob	Material selection for repair of structural concrete using VIKOR method	489-497
Sair, S. / Oushabi, A. / Kammouni, A. / Tanane, O. / Abboud, Y. / El Bouari, A.	Mechanical and thermal conductivity properties of hemp fiber reinforced polyurethane composites	203-212
Muttashar, Habeeb Lateef / Ali, Nazri Bin / Ariffin, Mohd Azreen Mohd / Hussin, Mohd Warid	Microstructures and physical properties of waste garnets as a promising construction materials	87-96
Arooz, F. R. / Halwatura, R. U.	Mud-concrete block (MCB): mix design & durability characteristics	39-50
Rahnavard, Rohola / Fard, Faramarz Fathi Zadeh / Hosseini, Ali / Suleiman, Mohamed	Nonlinear analysis on progressive collapse of tall steel composite buildings	359-379
Olonade, Kolawole Adisa / Ajibola, Ibrahim Kayode / Okeke, Chigozie Lawrence	Performance evaluation of concrete made with sands from selected locations in Osun State, Nigeria	160-171
Li, Yeou-Fong / Badjie, Sainey / Chiu, Yu-Tsung / Chen, Walter W.	Placing an FRP bridge in Taijiang national park and in virtual reality	226-237
Ababneh, Ayman / Matalkah, Faris	Potential use of Jordanian volcanic tuffs as supplementary cementitious materials	193-202
Bediako, Mark	Pozzolanic potentials and hydration behavior of ground waste clay brick obtained from clamp-firing technology	1-7
Mohammed, Bashar S. / Liew, Mohd Shahir / Alaloul, Wesam S. / Khed, Veerendrakumar C. / Hoong, Cheah Yit / Adamu, Musa	Properties of nano-silica modified pervious concrete	409-422
Barozzi, G. / Cosentino, N. / Lanzoni, L. / Tarantino, A. M.	Safety assessment of historic timber structural elements	530-541
Farzi, Mohsen / Pakbaz, Mohammad S. / Aminpour, Hesam A.	Selection of support system for urban deep excavations: A case study in Ahvaz geology	131-138
Huang, Yaoying / Yuan, Bin / Xiao, Lei / Liu, Yu	Studies on the wet expansion deformation of hydraulic concrete with fly ash under non-standard temperatures	392-400
Chitrala, Sreenivasulu / Jadaprolu, Guru Jawahar / Chundupalli, Sashidhar	Study and predicting the stress-strain characteristics of geopolymer concrete under compression	172-192
Usahanunth, Nopagon / Tuprakay, Seree / Kongsong, Waranon / Tuprakay, Sirawan Ruangchuay	Study of mechanical properties and recommendations for the application of waste Bakelite aggregate concrete	299-314
Harith, Iman Kattoof	Study on polyurethane foamed concrete for use in structural applications	79-86
Gardner, Diane / Lark, Robert / Jefferson, Tony / Davies, Robert	A survey on problems encountered in current concrete construction and the potential benefits of self-healing cementitious materials	238-247
Chidambaram, S.	Thermal damage of sulfur processed chamber under Claus operating reaction conditions—A case study	517-529
Bahtiar, Effendi Tri / Nugroho, Naresworo / Hermawan, Dede / Wirawan, Wilis	Triangle bracing system to reduce the vibration level of cooling tower – case study in PT Star Energy Geothermal (Wayang Windu) Ltd – Indonesia	248-257
Almuhanna, Raid R. A. / Ewadh, Hussein Ali / Alasadi, Saja J. M.	Using PAVER 6.5.7 and GIS program for pavement maintenance management for selected roads in Kerbala city	323-332
Sudprasert, Sudaporn / Sankaewthong, Sukhum	Utilization of rice husks in a water-permeable material for passive evaporative cooling	51-60

Auteur(s)

Titre

Page(s)

Rao, K. Jagannadha / Keerthi, K. / Vasam, Srinivas

Acid resistance of quaternary blended recycled aggregate concrete

423-433

Lahdensivu, Jukka / Köliö, Arto / Husaini, David

Alkali-silica reaction in Southern-Finland’s bridges

469-475

Zoccali, Pablo / Moretti, Laura / Di Mascio, Paola / Loprencipe, Giuseppe / D'Andrea, Antonio / Bonin, Guido / Teltayev, Bagdat / Caro, Silvia

Analysis of natural stone block pavements in urban shared areas

498-506

Uchaeva, T. V. / Loganina, V. I.

Analysis of the risk at the finishing of the building products and construction of paint compositions

213-216

Bumanis, Girts / Dembovska, Laura / Korjakins, Aleksandrs / Bajare, Diana

Applicability of freeze-thaw resistance testing methods for high strength concrete at extreme −52.5 °C and standard −18 °C testing conditions

139-149

Thaickavil, Nassif Nazeer / Thomas, Job

Behaviour and strength assessment of masonry prisms

23-38

Marshdi, Qosai S. Radi

Benefits of using mineral additives, as components of the modern oil-well cement

455-458

Fonna, S. / Huzni, S. / Ariffin, A. K.

Boundary element inverse analysis for rebar corrosion detection: Study on the 2004 tsunami-affected structure in Aceh

292-298

Sassani, Alireza / Ceylan, Halil / Kim, Sunghwan / Arabzadeh, Ali / Taylor, Peter C. / Gopalakrishnan, Kasthurirangan

Development of Carbon Fiber-modified Electrically Conductive Concrete for Implementation in Des Moines International Airport

277-291

Idris, Irham Hameeda Mohamad / Yusof, Nur Zulaikha

Development of low thermal mass cement-sand block utilizing peat soil and effective microorganism

8-15

S Mohammed, Bashar / Liew, Mohd Shahir / S Alaloul, Wesam / Al-Fakih, Amin / Ibrahim, Wadhah / Adamu, Musa

Development of rubberized geopolymer interlocking bricks

401-408

Kissi, Ernest / Abdulai Sadick, Mohammed / Agyemang, Daniel Yamoah

Drivers militating against the pricing of sustainable construction materials: The Ghanaian quantity surveyors perspective

507-516

Amar, Mouhamadou / Benzerzour, Mahfoud / Safhi, Amine el Mahdi / Abriak, Nor-Edine

Durability of a cementitious matrix based on treated sediments

258-276

Palanisamy, P. / Kumar, P. Suresh

Effect of molarity in geo polymer earth brick reinforced with fibrous coir wastes using sandy soil and quarry dust as fine aggregate. (Case study)

347-358

Bala, Nura / Napiah, Madzlan / Kamaruddin, Ibrahim

Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance

447-454

Meisuh, Bismark K. / Kankam, Charles K. / Buabin, Thomas K.

Effect of quarry rock dust on the flexural strength of concrete

16-22

Hou, Chaoping / Meng, Xi / Gao, Yanna / Mao, Wei / Long, Enshen

Effect of the insulation materials filling on the thermal performance of sintered hollow bricks under the air-conditioning intermittent operation

217-225

Elbar, M. / Senhadji, Y. / Benosman, A. S. / Khelafi, H. / Mouli, M.

Effect of thermo-activation on mechanical strengths and chlorides permeability in pozzolanic materials

459-468

Mohammed, Bashar S. / Adamu, Musa / Liew, Mohd Shahir

Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques

380-391

Leramo, Richard O. / Adekoya, Lawson O. / Loto, Cleophas A.

Evaluation of surface geometries and physical properties of concrete reinforcement steel rods rolled in Nigeria

150-159

Shaaban, Ibrahim G. / Seoud, Osama A.

Experimental behavior of full-scale exterior beam-column space joints retrofitted by ferrocement layers under cyclic loading

61-78

Ridha, Maha M. S. / Sarsam, Kaiss F. / Al-Shaarbaf, Ihsan A. S.

Experimental Study and Shear Strength Prediction for Reactive Powder Concrete Beams

434-446

Shaaban, Ibrahim G. / Said, Mohamed

Finite element modeling of exterior beam-column joints strengthened by ferrocement under cyclic loading

333-346

Yoshitake, Isamu / Maeda, Tomoyuki / Hieda, Masahiro

Image analysis for the detection and quantification of concrete bugholes in a tunnel lining

116-130

Sultan, Mohamed E. / Abo-El-Enein, Salah A. / Sayed, Ahmed Z. / El-Sokkary, Tarek M. / Hammad, Hamdy A.

Incorporation of cement bypass flue dust in fly ash and blast furnace slag-based geopolymer

315-322

Rahnavard, Rohola / Naghavi, Mohammad / Aboudi, Maryam / Suleiman, Mohamed

Investigating modeling approaches of buckling-restrained braces under cyclic loads

476-488

Janotka, Ivan / Bačuvčík, Michal / Paulík, Peter

Low carbonation of concrete found on 100-year-old bridges

97-115

Kiani, Behnam / Liang, Robert Y. / Gross, Jacob

Material selection for repair of structural concrete using VIKOR method

489-497

Sair, S. / Oushabi, A. / Kammouni, A. / Tanane, O. / Abboud, Y. / El Bouari, A.

Mechanical and thermal conductivity properties of hemp fiber reinforced polyurethane composites

203-212

Muttashar, Habeeb Lateef / Ali, Nazri Bin / Ariffin, Mohd Azreen Mohd / Hussin, Mohd Warid

Microstructures and physical properties of waste garnets as a promising construction materials

87-96

Arooz, F. R. / Halwatura, R. U.

Mud-concrete block (MCB): mix design & durability characteristics

39-50

Rahnavard, Rohola / Fard, Faramarz Fathi Zadeh / Hosseini, Ali / Suleiman, Mohamed

Nonlinear analysis on progressive collapse of tall steel composite buildings

359-379

Olonade, Kolawole Adisa / Ajibola, Ibrahim Kayode / Okeke, Chigozie Lawrence

Performance evaluation of concrete made with sands from selected locations in Osun State, Nigeria

160-171

Li, Yeou-Fong / Badjie, Sainey / Chiu, Yu-Tsung / Chen, Walter W.

Placing an FRP bridge in Taijiang national park and in virtual reality

226-237

Ababneh, Ayman / Matalkah, Faris

Potential use of Jordanian volcanic tuffs as supplementary cementitious materials

193-202

Bediako, Mark

Pozzolanic potentials and hydration behavior of ground waste clay brick obtained from clamp-firing technology

1-7

Mohammed, Bashar S. / Liew, Mohd Shahir / Alaloul, Wesam S. / Khed, Veerendrakumar C. / Hoong, Cheah Yit / Adamu, Musa

Properties of nano-silica modified pervious concrete

409-422

Barozzi, G. / Cosentino, N. / Lanzoni, L. / Tarantino, A. M.

Safety assessment of historic timber structural elements

530-541

Farzi, Mohsen / Pakbaz, Mohammad S. / Aminpour, Hesam A.

Selection of support system for urban deep excavations: A case study in Ahvaz geology

131-138

Huang, Yaoying / Yuan, Bin / Xiao, Lei / Liu, Yu

Studies on the wet expansion deformation of hydraulic concrete with fly ash under non-standard temperatures

392-400

Chitrala, Sreenivasulu / Jadaprolu, Guru Jawahar / Chundupalli, Sashidhar

Study and predicting the stress-strain characteristics of geopolymer concrete under compression

172-192

Usahanunth, Nopagon / Tuprakay, Seree / Kongsong, Waranon / Tuprakay, Sirawan Ruangchuay

Study of mechanical properties and recommendations for the application of waste Bakelite aggregate concrete

299-314

Harith, Iman Kattoof

Study on polyurethane foamed concrete for use in structural applications

79-86

Gardner, Diane / Lark, Robert / Jefferson, Tony / Davies, Robert

A survey on problems encountered in current concrete construction and the potential benefits of self-healing cementitious materials

238-247

Chidambaram, S.

Thermal damage of sulfur processed chamber under Claus operating reaction conditions—A case study

517-529

Bahtiar, Effendi Tri / Nugroho, Naresworo / Hermawan, Dede / Wirawan, Wilis

Triangle bracing system to reduce the vibration level of cooling tower – case study in PT Star Energy Geothermal (Wayang Windu) Ltd – Indonesia

248-257

Almuhanna, Raid R. A. / Ewadh, Hussein Ali / Alasadi, Saja J. M.

Using PAVER 6.5.7 and GIS program for pavement maintenance management for selected roads in Kerbala city

323-332

Sudprasert, Sudaporn / Sankaewthong, Sukhum

Utilization of rice husks in a water-permeable material for passive evaporative cooling

51-60

Publicité

Case Studies in Construction Materials - juin 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Case Studies in Construction Materials - juin 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.