0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Medium- and High-Frequency Vibration Characteristics of a Box-Girder by the Waveguide Finite Element Method

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: International Journal of Structural Stability and Dynamics, , n. 11, v. 18
Page(s): 1850141
DOI: 10.1142/s0219455418501419
Abstrait:

An approach to predicting the vibration responses of a bridge and analyzing the wave propagation characteristics along the bridge is proposed based on the waveguide finite element (WFE) method. For verification, a field vibration test was performed on a 30[Formula: see text]m-long simply supported box-girder on the fourth line of Guangzhou Metro in China. The numerical results were shown to agree well with the test results, demonstrating the accuracy of the proposed approach. The advantages of the WFE approach are discussed by comparing the WFE with finite element (FE) analyses. The dispersion characteristics and mode shapes of waves propagating in the box-girder are calculated by using the WFE method, from which the dominant wave modes corresponding to the peaks of the medium- and high-frequency train-induced vibrations are identified. A vibration reduction measure is considered. Both the test and numerical results show that the medium- and high-frequency vibrations of the box-girder are predominately in the 1/3 octave center frequency range of 63–100[Formula: see text]Hz with maximum occurring at the center frequency of 80[Formula: see text]Hz. The WFE method has higher computational efficiency and requires smaller storage space than the FE counterpart, but provides similar predictions as the latter. In total, there are 14 wave modes propagating in the box-girder below 200[Formula: see text]Hz. The G1, A1 and D2 wave modes are the dominant wave modes generating vibration velocity peaks on the top, bottom and flange slabs, respectively. Adding a middle web slab to the center of the cross-section is an effective way to mitigate the vibration of the box-girder bridge.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1142/s0219455418501419.
  • Informations
    sur cette fiche
  • Reference-ID
    10352150
  • Publié(e) le:
    10.08.2019
  • Modifié(e) le:
    10.08.2019
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine