0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Investigation of Indoor Asymmetric Thermal Radiation in Tibet Plateau: Case Study of a Typical Office Building

Auteur(s): ORCID

Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 2, v. 12
Page(s): 129
DOI: 10.3390/buildings12020129
Abstrait:

The unique climate in cold plateaus leads to long and cold winters, which result in the characteristics and creation of an indoor thermal environment different from that of plain areas. However, there is a lack of detailed research on and evaluation of indoor temperature distributions. This study took an office building in Lhasa as an example to study the indoor non-uniform temperature distributions with radiator and solar radiation. The indoor and outdoor thermal environment parameters were tested. Next, a numerical model was established and verified. On a typical winter weather day, although the average indoor air temperature and radiation temperature in Lhasa are higher than those in Beijing (both are cold areas), the temperature in both is lower than comfortable levels. The indoor vertical air temperature differences are below 3 °C, with a 5% dissatisfaction most of the time. Solar radiation and radiators seriously affect the uniformity of the indoor thermal environment. The radiation asymmetry in Lhasa is significant, and the maximum radiation temperature asymmetry can reach 8.73 °C. In addition, the setting of north-facing windows should be avoided as far as possible in Tibetan areas. Suitable design and evaluation standards should pay attention to the obvious phenomenon of uneven indoor temperature distribution.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

Lieux géographiques

  • Informations
    sur cette fiche
  • Reference-ID
    10657646
  • Publié(e) le:
    17.02.2022
  • Modifié(e) le:
    01.06.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine