Smart Materials and Structures - v. 23, n. 4 (avril 2014)

Publié:	avril 2014

Auteur(s)	Titre	Page(s)
Reynolds, M. / Daley, S.	An active viscoelastic metamaterial for isolation applications	045030
Roper, David A. / Good, Brandon L. / McCauley, Raymond / Yarlagadda, Shridhar / Smith, Jared / Good, Austin / Pa, Peter / Mirotznik, Mark S.	Additive manufacturing of graded dielectrics	045029
Aridogan, U. / Basdogan, I. / Erturk, A.	Analytical modeling and experimental validation of a structurally integrated piezoelectric energy harvester on a thin plate	045039
Zhou, Maoying / Ruan, Yuan / Liu, Weiting / Huang, Shuo / Fu, Xin	A bio-inspired piezoelectric motor with simple structured asymmetric stator	045003
Berasategui, J. / Elejabarrieta, M. J. / Bou-Ali, M. M.	Characterization analysis of a MR damper	045025
Cai, Jianguo / Feng, Jian	Concept and behavior of rolling joints for multistable plate structures	045011
Zhang, Benniu / Wang, Shuliang / Li, Xingxing / Zhang, Xu / Yang, Guang / Qiu, Minfeng	Crack width monitoring of concrete structures based on smart film	045031
Tallman, T. N. / Gungor, S. / Wang, K. W. / Bakis, C. E.	Damage detection and conductivity evolution in carbon nanofiber epoxy via electrical impedance tomography	045034
Anaya, Maribel / Tibaduiza, Diego A. / Torres-Arredondo, Miguel A. / Pozo, Francesc / Ruiz, Magda / Mujica, Luis E. / Rodellar, José / Fritzen, Claus-Peter	Data-driven methodology to detect and classify structural changes under temperature variations	045006
Min, Kyung-Won / Kim, JunHee / Kim, Young-Wook	Design and test of tuned liquid mass dampers for attenuation of the wind responses of a full scale building	045020
Quintero, Andrés Vásquez / Besse, Nadine / Janphuang, Pattanaphong / Lockhart, Robert / Briand, Danick / de Rooij, Nico F.	Design optimization of vibration energy harvesters fabricated by lamination of thinned bulk-PZT on polymeric substrates	045041
Cellini, Filippo / Intartaglia, Carmela / Soria, Leonardo / Porfiri, Maurizio	Effect of hydrodynamic interaction on energy harvesting in arrays of ionic polymer metal composites vibrating in a viscous fluid	045015
Gan, W. C. / Majid, W. H. Abd	Effect of TiO2on enhanced pyroelectric activity of PVDF composite	045026
Lim, Teik-Cheng	Elastic stability of thick auxetic plates	045004
Zhou, Jianyou / Jiang, Liying / Khayat, Roger E.	Electromechanical response and failure modes of a dielectric elastomer tube actuator with boundary constraints	045028
Mo, Changki / Davidson, Joseph / Clark, William W.	Energy harvesting with piezoelectric circular membrane under pressure loading	045005
Zhang, Haiyu / Wang, Xingzhe	Estimation of effective permeability for magnetoactive composites containing multi-chain-structured particles based on the generalized Mori–Tanaka approach	045009
Hosseinzadeh, Ali Zare / Bagheri, Abdollah / Amiri, Gholamreza Ghodrati / Koo, Ki-Young	A flexibility-based method via the iterated improved reduction system and the cuckoo optimization algorithm for damage quantification with limited sensors	045019
Eun, Youngkee / Kwon, Dae-Sung / Kim, Min-Ook / Yoo, Ilseon / Sim, Jaesam / Ko, Hee-Jin / Cho, Kyung-Ho / Kim, Jongbaeg	A flexible hybrid strain energy harvester using piezoelectric and electrostatic conversion	045040
Guo, Tong / Chen, Cheng / Xu, Weijie / Sanchez, Frank	A frequency response analysis approach for quantitative assessment of actuator tracking for real-time hybrid simulation	045042
Guadagno, Liberata / Raimondo, Marialuigia / Naddeo, Carlo / Longo, Pasquale / Mariconda, Annaluisa / Binder, Wolfgang H.	Healing efficiency and dynamic mechanical properties of self-healing epoxy systems	045001
Pozzi, Michele	Impulse excitation of piezoelectric bimorphs for energy harvesting: a dimensionless model	045044
Copp, P.	In-flight rotorcraft blade elastic twist sensor	045021
Mohammed, Arshed Abdulhamed / Haris, Sallehuddin Mohamed / Nuawi, Mohd Zaki	Influence of a silver epoxy dopant on the performance of broken piezoelectric ceramic transducer based on an analytical model	045036
Gherlone, Marco / Cerracchio, Priscilla / Mattone, Massimiliano / Di Sciuva, Marco / Tessler, Alexander	An inverse finite element method for beam shape sensing: theoretical framework and experimental validation	045027
Yang, Kai / Harne, R. L. / Wang, K. W. / Huang, Hai	Investigation of a bistable dual-stage vibration isolator under harmonic excitation	045033
Kim, Sang-Youn / Kim, Jaehwan / Kim, Ki-Baek	Investigation of size effect on film type haptic actuator made with cellulose acetate	045016
Ramakrishnan, Manjusha / Rajan, Ginu / Semenova, Yuliya / Callaghan, Dean / Farrell, Gerald	Investigation of the effect of vibration amplitude on vibration measurements of polarimetric fiber sensors embedded in composite beams	045037
Behrooz, Majid / Wang, Xiaojie / Gordaninejad, Faramarz	Modeling of a new semi-active/passive magnetorheological elastomer isolator	045013
Zhao, Jinling / Ji, Hongli / Qiu, Jinhao	Modeling of Lamb waves in composites using new third-order plate theories	045017
Lucantonio, Alessandro / Nardinocchi, Paola / Pezzulla, Matteo / Teresi, Luciano	Multiphysics of bio-hybrid systems: shape control and electro-induced motion	045043
Sheng, Junjie / Chen, Hualing / Li, Bo / Wang, Yongquan	Nonlinear dynamic characteristics of a dielectric elastomer membrane undergoing in-plane deformation	045010
Ubertini, Filippo / Laflamme, Simon / Ceylan, Halil / Materazzi, Annibale Luigi / Cerni, Gianluca / Saleem, Hussam / D'Alessandro, Antonella / Corradini, Alessandro	Novel nanocomposite technologies for dynamic monitoring of structures: a comparison between cement-based embeddable and soft elastomeric surface sensors	045023
Behrooz, Majid / Wang, Xiaojie / Gordaninejad, Faramarz	Performance of a new magnetorheological elastomer isolation system	045014
Lu, Haibao / Huang, Wei Min / Leng, Jinsong	A phenomenological model for simulating the chemo-responsive shape memory effect in polymers undergoing a permeation transition	045038
Yang, D. / He, L. H.	Photo-triggered wrinkling of glassy nematic films	045012
Wang, Huiming	Piezothermoelastic behavior of multilayered pyroelectric cylindrical actuators with weakly conducting interfaces resting on elastic foundations	045018
Wang, F. Z. / Wang, H. / Sun, H. J. / Hu, S. G.	Research on a 0–3 cement-based piezoelectric sensor with excellent mechanical–electrical response and good durability	045032
Feng, Guo-Hua / Zhan, Zhen-Hua	A room-temperature processed parylene-patterned helical ionic polymer–metal composite spring actuator with selectable active region	045002
Rossiter, Jonathan / Takashima, Kazuto / Scarpa, Fabrizio / Walters, Peter / Mukai, Toshiharu	Shape memory polymer hexachiral auxetic structures with tunable stiffness	045007
Balogun, Olaniyi / Mo, Changki	Shape memory polymers: three-dimensional isotropic modeling	045008
Yoon, Heonjun / Youn, Byeng D.	Stochastic quantification of the electric power generated by a piezoelectric energy harvester using a time–frequency analysis under non-stationary random vibrations	045035
Wang, Yiqiang / Luo, Zhen / Zhang, Xiaopeng / Kang, Zhan	Topological design of compliant smart structures with embedded movable actuators	045024
Park, Jong-Woong / Sim, Sung-Han / Jung, Hyung-Jo	Wireless displacement sensing system for bridges using multi-sensor fusion	045022

Auteur(s)

Titre

Page(s)

Reynolds, M. / Daley, S.

An active viscoelastic metamaterial for isolation applications

045030

Roper, David A. / Good, Brandon L. / McCauley, Raymond / Yarlagadda, Shridhar / Smith, Jared / Good, Austin / Pa, Peter / Mirotznik, Mark S.

Additive manufacturing of graded dielectrics

045029

Aridogan, U. / Basdogan, I. / Erturk, A.

Analytical modeling and experimental validation of a structurally integrated piezoelectric energy harvester on a thin plate

045039

Zhou, Maoying / Ruan, Yuan / Liu, Weiting / Huang, Shuo / Fu, Xin

A bio-inspired piezoelectric motor with simple structured asymmetric stator

045003

Berasategui, J. / Elejabarrieta, M. J. / Bou-Ali, M. M.

Characterization analysis of a MR damper

045025

Cai, Jianguo / Feng, Jian

Concept and behavior of rolling joints for multistable plate structures

045011

Zhang, Benniu / Wang, Shuliang / Li, Xingxing / Zhang, Xu / Yang, Guang / Qiu, Minfeng

Crack width monitoring of concrete structures based on smart film

045031

Tallman, T. N. / Gungor, S. / Wang, K. W. / Bakis, C. E.

Damage detection and conductivity evolution in carbon nanofiber epoxy via electrical impedance tomography

045034

Anaya, Maribel / Tibaduiza, Diego A. / Torres-Arredondo, Miguel A. / Pozo, Francesc / Ruiz, Magda / Mujica, Luis E. / Rodellar, José / Fritzen, Claus-Peter

Data-driven methodology to detect and classify structural changes under temperature variations

045006

Min, Kyung-Won / Kim, JunHee / Kim, Young-Wook

Design and test of tuned liquid mass dampers for attenuation of the wind responses of a full scale building

045020

Quintero, Andrés Vásquez / Besse, Nadine / Janphuang, Pattanaphong / Lockhart, Robert / Briand, Danick / de Rooij, Nico F.

Design optimization of vibration energy harvesters fabricated by lamination of thinned bulk-PZT on polymeric substrates

045041

Cellini, Filippo / Intartaglia, Carmela / Soria, Leonardo / Porfiri, Maurizio

Effect of hydrodynamic interaction on energy harvesting in arrays of ionic polymer metal composites vibrating in a viscous fluid

045015

Gan, W. C. / Majid, W. H. Abd

Effect of TiO2on enhanced pyroelectric activity of PVDF composite

045026

Lim, Teik-Cheng

Elastic stability of thick auxetic plates

045004

Zhou, Jianyou / Jiang, Liying / Khayat, Roger E.

Electromechanical response and failure modes of a dielectric elastomer tube actuator with boundary constraints

045028

Mo, Changki / Davidson, Joseph / Clark, William W.

Energy harvesting with piezoelectric circular membrane under pressure loading

045005

Zhang, Haiyu / Wang, Xingzhe

Estimation of effective permeability for magnetoactive composites containing multi-chain-structured particles based on the generalized Mori–Tanaka approach

045009

Hosseinzadeh, Ali Zare / Bagheri, Abdollah / Amiri, Gholamreza Ghodrati / Koo, Ki-Young

A flexibility-based method via the iterated improved reduction system and the cuckoo optimization algorithm for damage quantification with limited sensors

045019

Eun, Youngkee / Kwon, Dae-Sung / Kim, Min-Ook / Yoo, Ilseon / Sim, Jaesam / Ko, Hee-Jin / Cho, Kyung-Ho / Kim, Jongbaeg

A flexible hybrid strain energy harvester using piezoelectric and electrostatic conversion

045040

Guo, Tong / Chen, Cheng / Xu, Weijie / Sanchez, Frank

A frequency response analysis approach for quantitative assessment of actuator tracking for real-time hybrid simulation

045042

Guadagno, Liberata / Raimondo, Marialuigia / Naddeo, Carlo / Longo, Pasquale / Mariconda, Annaluisa / Binder, Wolfgang H.

Healing efficiency and dynamic mechanical properties of self-healing epoxy systems

045001

Pozzi, Michele

Impulse excitation of piezoelectric bimorphs for energy harvesting: a dimensionless model

045044

Copp, P.

In-flight rotorcraft blade elastic twist sensor

045021

Mohammed, Arshed Abdulhamed / Haris, Sallehuddin Mohamed / Nuawi, Mohd Zaki

Influence of a silver epoxy dopant on the performance of broken piezoelectric ceramic transducer based on an analytical model

045036

Gherlone, Marco / Cerracchio, Priscilla / Mattone, Massimiliano / Di Sciuva, Marco / Tessler, Alexander

An inverse finite element method for beam shape sensing: theoretical framework and experimental validation

045027

Yang, Kai / Harne, R. L. / Wang, K. W. / Huang, Hai

Investigation of a bistable dual-stage vibration isolator under harmonic excitation

045033

Kim, Sang-Youn / Kim, Jaehwan / Kim, Ki-Baek

Investigation of size effect on film type haptic actuator made with cellulose acetate

045016

Ramakrishnan, Manjusha / Rajan, Ginu / Semenova, Yuliya / Callaghan, Dean / Farrell, Gerald

Investigation of the effect of vibration amplitude on vibration measurements of polarimetric fiber sensors embedded in composite beams

045037

Behrooz, Majid / Wang, Xiaojie / Gordaninejad, Faramarz

Modeling of a new semi-active/passive magnetorheological elastomer isolator

045013

Zhao, Jinling / Ji, Hongli / Qiu, Jinhao

Modeling of Lamb waves in composites using new third-order plate theories

045017

Lucantonio, Alessandro / Nardinocchi, Paola / Pezzulla, Matteo / Teresi, Luciano

Multiphysics of bio-hybrid systems: shape control and electro-induced motion

045043

Sheng, Junjie / Chen, Hualing / Li, Bo / Wang, Yongquan

Nonlinear dynamic characteristics of a dielectric elastomer membrane undergoing in-plane deformation

045010

Ubertini, Filippo / Laflamme, Simon / Ceylan, Halil / Materazzi, Annibale Luigi / Cerni, Gianluca / Saleem, Hussam / D'Alessandro, Antonella / Corradini, Alessandro

Novel nanocomposite technologies for dynamic monitoring of structures: a comparison between cement-based embeddable and soft elastomeric surface sensors

045023

Behrooz, Majid / Wang, Xiaojie / Gordaninejad, Faramarz

Performance of a new magnetorheological elastomer isolation system

045014

Lu, Haibao / Huang, Wei Min / Leng, Jinsong

A phenomenological model for simulating the chemo-responsive shape memory effect in polymers undergoing a permeation transition

045038

Yang, D. / He, L. H.

Photo-triggered wrinkling of glassy nematic films

045012

Wang, Huiming