Journal of Materials in Civil Engineering (ASCE) - v. 23, n. 4 (avril 2011)

Publié:	avril 2011

Auteur(s)	Titre	Page(s)
Demircan, Emrah / Harendra, Sivaram / Vipulanandan, Cumaraswamy	Artificial Neural Network and Nonlinear Models for Gelling Time and Maximum Curing Temperature Rise in Polymer Grouts	372-377
Joseph, Glory / Ramamurthy, K.	Autogenous Curing of Cold-Bonded Fly-Ash-Aggregate Concrete	393-401
Dapena, E. / Alaejos, P. / Lobet, A. / Pérez, D.	Effect of Recycled Sand Content on Characteristics of Mortars and Concretes	414-422
Al-Hadidy, A. I. / Yi-qiu, Tan	Effect of Styrene-Butadiene-Styrene on the Properties of Asphalt and Stone-Matrix-Asphalt Mixture	504-510
Nigro, E. / Di Ludovico, M. / Bilotta, A.	Experimental Investigation of FRP-Concrete Debonding under Cyclic Actions	360-371
Underwood, B. Shane / Yun, Taeyoung / Kim, Y. Richard	Experimental Investigations of the Viscoelastic and Damage Behaviors of Hot-Mix Asphalt in Compression	459-466
Vasconcelos, Kamilla L. / Bhasin, Amit / Little, Dallas N. / Lytton, Robert L.	Experimental Measurement of Water Diffusion through Fine Aggregate Mixtures	445-452
Xiao, Feipeng / Amirkhanian, Armen N. / Amirkhanian, Serji N.	Influence of Carbon Nanoparticles on the Rheological Characteristics of Short-Term Aged Asphalt Binders	423-431
Naik, Tarun R. / Kraus, Rudolph N. / Kumar, Rakesh	Influence of Types of Coarse Aggregates on the Coefficient of Thermal Expansion of Concrete	467-472
Hossain, Khandaker M. Anwar / Ahmed, Saifuddin	Lightweight Concrete Incorporating Volcanic Ash-Based Blended Cement and Pumice Aggregate	493-498
Han, Rongbin / Jin, Xin / Glover, Charles J.	Modeling Pavement Temperature for Use in Binder Oxidation Models and Pavement Performance Prediction	351-359
Mollo, Luigi / Greco, Roberto	Moisture Measurements in Masonry Materials by Time Domain Reflectometry	441-444
Huh, Jung Do / Mun, Sung Ho / Huang, Shin-Che	New Unified Viscoelastic Constitutive Equation for Asphalt Binders and Asphalt Aggregate Mixtures	473-484
Udoeyo, Felix F. / Anyanwu, Chinedu I. O. / Brooks, Robert / Udo-Inyang, Philip	Properties of Palm Nut Fiber–Reinforced Cement Composite Containing Pulverized Kernel Shell as Supplementary Material	378-384
Otero Chans, D. / Estévez Cimadevila, J. / Martín Gutiérrez, E.	Strength of Joints with Epoxy-Glued Threaded Steel Rods in Tali Timber	453-458
Tang, Xinwei / Zhou, Yuande / Zhang, Chuhan / Shi, Jianjun	Study on the Heterogeneity of Concrete and Its Failure Behavior Using the Equivalent Probabilistic Model	402-413
Bhasin, Amit / Bommavaram, Rammohan / Greenfield, Michael L. / Little, Dallas N.	Use of Molecular Dynamics to Investigate Self-Healing Mechanisms in Asphalt Binders	485-492
Chindaprasirt, Prinya / Chotetanorm, Chaicharn / Rukzon, Sumrerng	Use of Palm Oil Fuel Ash to Improve Chloride and Corrosion Resistance of High-Strength and High-Workability Concrete	499-503
Naderi, Mahmood	Using Twist-Off Method for Measuring Surface Strength of Concretes Cured under Different Environments	385-392
Consoli, Nilo Cesar / Rosa, Amanda Dalla / Saldanha, Rodrigo Beck	Variables Governing Strength of Compacted Soil–Fly Ash–Lime Mixtures	432-440

Auteur(s)

Titre

Page(s)

Demircan, Emrah / Harendra, Sivaram / Vipulanandan, Cumaraswamy

Artificial Neural Network and Nonlinear Models for Gelling Time and Maximum Curing Temperature Rise in Polymer Grouts

372-377

Joseph, Glory / Ramamurthy, K.

Autogenous Curing of Cold-Bonded Fly-Ash-Aggregate Concrete

393-401

Dapena, E. / Alaejos, P. / Lobet, A. / Pérez, D.

Effect of Recycled Sand Content on Characteristics of Mortars and Concretes

414-422