Engineering Structures - octobre 2014

Publié:	octobre 2014

Auteur(s)	Titre	Page(s)
Milani, Gabriele / Simoni, Michele / Tralli, Antonio	Advanced numerical models for the analysis of masonry cross vaults: A case-study in Italy	339-358
Lemnitzer, Anne / Massone, Leonardo M. / Skolnik, Derek A. / de la Llera Martin, Juan C. / Wallace, John W.	Aftershock response of RC buildings in Santiago, Chile, succeeding the magnitude 8.8 Maule earthquake	324-338
Rodríguez-León, M. T. / Sánchez-Sánchez, José	Analysis of wind action on unique structures with application to Seville Fair Gateways	138-146
Gašić, Vlada / Šalinić, Slaviša / Obradović, Aleksandar / Milovančević, Milorad	Application of the lumped mass technique in dynamic analysis of a flexible L-shaped structure under moving loads	383-392
Sireteanu, Tudor / Mitu, Ana-Maria / Giuclea, Marius / Solomon, Ovidiu	A comparative study of the dynamic behavior of Ramberg–Osgood and Bouc–Wen hysteresis models with application to seismic protection devices	255-269
Gu, Jianzhong	Design of regular and shear-reinforced panel web beams for long-span construction	187-192
Seim, Werner / Hummel, Johannes / Vogt, Tobias	Earthquake design of timber structures – Remarks on force-based design procedures for different wall systems	124-137
Ramos, A. Pinho / Lúcio, Válter J. G. / Faria, Duarte M. V.	The effect of the vertical component of prestress forces on the punching strength of flat slabs	90-98
Carbonell-Márquez, Juan F. / Gil-Martín, Luisa M. / Alejandro Fernández-Ruíz, M. / Hernández-Montes, Enrique	Effective area in tension stiffening of reinforced concrete piles subjected to flexure according to Eurocode 2	62-74
Vu, Ngoc Son / Li, Bing / Beyer, Katrin	Effective stiffness of reinforced concrete coupling beams	371-382
Meda, Alberto / Mostosi, Serena / Rinaldi, Zila / Riva, Paolo	Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns	112-123
Remennikov, Alex M. / Kaewunruen, Sakdirat	Experimental load rating of aged railway concrete sleepers	147-162
Thermou, Georgia E. / Papanikolaou, Vassilis K. / Kappos, Andreas J.	Flexural behaviour of reinforced concrete jacketed columns under reversed cyclic loading	270-282
Wang, Zhenghua / Dueñas-Osorio, Leonardo / Padgett, Jamie E.	Influence of scour effects on the seismic response of reinforced concrete bridges	202-214
Spizzuoco, Mariacristina / Calabrese, Andrea / Serino, Giorgio	Innovative low-cost recycled rubber–fiber reinforced isolator: Experimental tests and Finite Element Analyses	99-111
Reynolds, Thomas / Harris, Richard / Chang, Wen-Shao	Nonlinear pre-yield modal properties of timber structures with large-diameter steel dowel connections	235-244
Dikaros, I. C. / Sapountzakis, E. J.	Nonuniform shear warping effect in the analysis of composite beams by BEM	215-234
Tohidi, M. / Yang, J. / Baniotopoulos, C.	Numerical evaluations of codified design methods for progressive collapse resistance of precast concrete cross wall structures	177-186
de Miranda, Stefano / Patruno, Luca / Ubertini, Francesco / Vairo, Giuseppe	On the identification of flutter derivatives of bridge decks via RANS turbulence models: Benchmarking on rectangular prisms	359-370
Palermo, Michele / Ricci, Ilaria / Silvestri, Stefano / Gasparini, Giada / Trombetti, Tomaso / Foti, Dora / Ivorra, Salvador	Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls	75-89
Le, Jia-Liang / Xue, Bing	Probabilistic analysis of reinforced concrete frame structures against progressive collapse	313-323
Koppitz, Robert / Kenel, Albin / Keller, Thomas	Punching shear strengthening of flat slabs using prestressed carbon fiber-reinforced polymer straps	283-294
Pantelides, C. P. / Garfield, T. T. / Richins, W. D. / Larson, T. K. / Blakeley, J. E.	Reinforced concrete and fiber reinforced concrete panels subjected to blast detonations and post-blast static tests	24-33
Fadwa, Issa / Ali, Tasnimi Abbas / Nazih, Eilouch / Sara, Mirzabagheri	Reinforced concrete wide and conventional beam–column connections subjected to lateral load	34-48
Liu, Zhifeng / Atamturktur, Sez / Juang, C. Hsein	Reliability based multi-objective robust design optimization of steel moment resisting frame considering spatial variability of connection parameters	393-403
Summers, P. T. / Case, S. W. / Lattimer, B. Y.	Residual mechanical properties of aluminum alloys AA5083-H116 and AA6061-T651 after fire	49-61
Shen, Jay / Wen, Rou / Akbas, Bülent / Doran, Bilge / Uckan, Eren	Seismic demand on brace-intersected beams in two-story X-braced frames	295-312
Saadat, Sanaz / Camp, Charles V. / Pezeshk, Shahram	Seismic performance-based design optimization considering direct economic loss and direct social loss	193-201
Natário, Francisco / Ruiz, Miguel Fernández / Muttoni, Aurelio	Shear strength of RC slabs under concentrated loads near clamped linear supports	10-23
Kryžanowski, A. / Planinc, I. / Schnabl, S.	Slip-buckling analysis of longitudinally delaminated composite columns	404-414
Palermo, Michele / Silvestri, Stefano / Gasparini, Giada / Trombetti, Tomaso	A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions	163-176
Kong, B. / Cai, C. S. / Kong, X.	Thermal property analysis and applications of GFRP panels to integral abutment bridges	1-9
Wieghaus, Kyle T. / Hurlebaus, Stefan / Mander, John B. / Fry, Gary T.	Wind-induced traffic signal structure response: Experiments and reduction via helical arm strakes	245-254

Auteur(s)

Titre

Page(s)

Milani, Gabriele / Simoni, Michele / Tralli, Antonio

Advanced numerical models for the analysis of masonry cross vaults: A case-study in Italy

339-358

Lemnitzer, Anne / Massone, Leonardo M. / Skolnik, Derek A. / de la Llera Martin, Juan C. / Wallace, John W.

Aftershock response of RC buildings in Santiago, Chile, succeeding the magnitude 8.8 Maule earthquake

324-338

Rodríguez-León, M. T. / Sánchez-Sánchez, José

Analysis of wind action on unique structures with application to Seville Fair Gateways

138-146

Gašić, Vlada / Šalinić, Slaviša / Obradović, Aleksandar / Milovančević, Milorad

Application of the lumped mass technique in dynamic analysis of a flexible L-shaped structure under moving loads

383-392

Sireteanu, Tudor / Mitu, Ana-Maria / Giuclea, Marius / Solomon, Ovidiu

A comparative study of the dynamic behavior of Ramberg–Osgood and Bouc–Wen hysteresis models with application to seismic protection devices

255-269

Gu, Jianzhong

Design of regular and shear-reinforced panel web beams for long-span construction

187-192

Seim, Werner / Hummel, Johannes / Vogt, Tobias

Earthquake design of timber structures – Remarks on force-based design procedures for different wall systems

124-137

Ramos, A. Pinho / Lúcio, Válter J. G. / Faria, Duarte M. V.

The effect of the vertical component of prestress forces on the punching strength of flat slabs

90-98

Carbonell-Márquez, Juan F. / Gil-Martín, Luisa M. / Alejandro Fernández-Ruíz, M. / Hernández-Montes, Enrique

Effective area in tension stiffening of reinforced concrete piles subjected to flexure according to Eurocode 2

62-74

Vu, Ngoc Son / Li, Bing / Beyer, Katrin

Effective stiffness of reinforced concrete coupling beams

371-382

Meda, Alberto / Mostosi, Serena / Rinaldi, Zila / Riva, Paolo

Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns

112-123

Remennikov, Alex M. / Kaewunruen, Sakdirat

Experimental load rating of aged railway concrete sleepers

147-162

Thermou, Georgia E. / Papanikolaou, Vassilis K. / Kappos, Andreas J.

Flexural behaviour of reinforced concrete jacketed columns under reversed cyclic loading

270-282

Wang, Zhenghua / Dueñas-Osorio, Leonardo / Padgett, Jamie E.

Influence of scour effects on the seismic response of reinforced concrete bridges

202-214

Spizzuoco, Mariacristina / Calabrese, Andrea / Serino, Giorgio

Innovative low-cost recycled rubber–fiber reinforced isolator: Experimental tests and Finite Element Analyses

99-111

Reynolds, Thomas / Harris, Richard / Chang, Wen-Shao

Nonlinear pre-yield modal properties of timber structures with large-diameter steel dowel connections

235-244

Dikaros, I. C. / Sapountzakis, E. J.

Nonuniform shear warping effect in the analysis of composite beams by BEM

215-234

Tohidi, M. / Yang, J. / Baniotopoulos, C.

Numerical evaluations of codified design methods for progressive collapse resistance of precast concrete cross wall structures

177-186

de Miranda, Stefano / Patruno, Luca / Ubertini, Francesco / Vairo, Giuseppe

On the identification of flutter derivatives of bridge decks via RANS turbulence models: Benchmarking on rectangular prisms

359-370

Palermo, Michele / Ricci, Ilaria / Silvestri, Stefano / Gasparini, Giada / Trombetti, Tomaso / Foti, Dora / Ivorra, Salvador

Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls

75-89

Le, Jia-Liang / Xue, Bing

Probabilistic analysis of reinforced concrete frame structures against progressive collapse

313-323

Koppitz, Robert / Kenel, Albin / Keller, Thomas

Punching shear strengthening of flat slabs using prestressed carbon fiber-reinforced polymer straps

283-294

Pantelides, C. P. / Garfield, T. T. / Richins, W. D. / Larson, T. K. / Blakeley, J. E.

Reinforced concrete and fiber reinforced concrete panels subjected to blast detonations and post-blast static tests

24-33

Fadwa, Issa / Ali, Tasnimi Abbas / Nazih, Eilouch / Sara, Mirzabagheri

Reinforced concrete wide and conventional beam–column connections subjected to lateral load

34-48

Liu, Zhifeng / Atamturktur, Sez / Juang, C. Hsein

Reliability based multi-objective robust design optimization of steel moment resisting frame considering spatial variability of connection parameters

393-403

Summers, P. T. / Case, S. W. / Lattimer, B. Y.

Residual mechanical properties of aluminum alloys AA5083-H116 and AA6061-T651 after fire

49-61

Shen, Jay / Wen, Rou / Akbas, Bülent / Doran, Bilge / Uckan, Eren

Seismic demand on brace-intersected beams in two-story X-braced frames

295-312

Saadat, Sanaz / Camp, Charles V. / Pezeshk, Shahram

Seismic performance-based design optimization considering direct economic loss and direct social loss

193-201

Natário, Francisco / Ruiz, Miguel Fernández / Muttoni, Aurelio

Shear strength of RC slabs under concentrated loads near clamped linear supports

10-23

Kryžanowski, A. / Planinc, I. / Schnabl, S.

Slip-buckling analysis of longitudinally delaminated composite columns

404-414

Palermo, Michele / Silvestri, Stefano / Gasparini, Giada / Trombetti, Tomaso

A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions

163-176

Kong, B. / Cai, C. S. / Kong, X.

Thermal property analysis and applications of GFRP panels to integral abutment bridges

1-9

Wieghaus, Kyle T. / Hurlebaus, Stefan / Mander, John B. / Fry, Gary T.

Wind-induced traffic signal structure response: Experiments and reduction via helical arm strakes

245-254

Publicité

Engineering Structures - octobre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - octobre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.