Construction and Building Materials - août 2017

Publié:	août 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhutovsky, Semion / Hooton, R. Douglas	Accelerated testing of cementitious materials for resistance to physical sulfate attack	98-106
Zhang, Zhengqi / Huang, Shuolei / Zhang, Ke	Accurate detection method for compaction uniformity of asphalt pavement	88-97
Botas, Sandro / Veiga, Rosário / Velosa, Ana	Air lime mortars for conservation of historic tiles: Bond strength of new mortars to old tiles	426-434
Alonso, M. M. / Gismera, S. / Blanco, M. T. / Lanzón, M. / Puertas, F.	Alkali-activated mortars: Workability and rheological behaviour	576-587
Sañudo, Roberto / Cerrada, Mikel / Alonso, Borja / dell'Olio, Luigi	Analysis of the influence of support positions in transition zones. A numerical analysis	207-217
Loaiza, Alexandra / Cifuentes, Sergio / Colorado, Henry A.	Asphalt modified with superfine electric arc furnace steel dust (EAF dust) with high zinc oxide content	538-547
Al-Dahawi, Ali / Yıldırım, Gürkan / Öztürk, Oğuzhan / Şahmaran, Mustafa	Assessment of self-sensing capability of Engineered Cementitious Composites within the elastic and plastic ranges of cyclic flexural loading	1-10
Ferdous, Wahid / Manalo, Allan / Aravinthan, Thiru	Bond behaviour of composite sandwich panel and epoxy polymer matrix: Taguchi design of experiments and theoretical predictions	76-87
Zhang, Jun / Weng, Xingzhong / Yang, Bohan / Li, Yifeng / Liu, Junzhong / Jiang, Le	Bonding characteristics of grouting layer in Prefabricated Cement Concrete Pavement	528-537
Arulrajah, Arul / Mohammadinia, Alireza / D'Amico, Angelo / Horpibulsuk, Suksun	Cement kiln dust and fly ash blends as an alternative binder for the stabilization of demolition aggregates	218-225
Kazemian, Ali / Yuan, Xiao / Cochran, Evan / Khoshnevis, Behrokh	Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture	639-647
Park, Sun-Jong / Kim, Gyu Jin / Kwak, Hyo-Gyoung	Characterization of stress-dependent ultrasonic nonlinearity variation in concrete under cyclic loading using nonlinear resonant ultrasonic method	272-282
Lee, Kang Seok / Choi, Jeong-Il / Kim, Sang-Koo / Lee, Bong-Kee / Hwang, Jae-Seung / Lee, Bang Yeon	Damping and mechanical properties of composite composed of polyurethane matrix and preplaced aggregates	68-75
Teixeira, S. / Santilli, A. / Puente, I.	Demoulding vertical elements: Recommendations for apply maturity functions	392-401
Heidari, Mojtaba / Torabi-Kaveh, Mehdi / Chastre, Carlos / Ludovico-Marques, Marco / Mohseni, Hassan / Akefi, Hossein	Determination of weathering degree of the Persepolis stone under laboratory and natural conditions using fuzzy inference system	28-41
Wu, B. / Ye, G.	Development of porosity of cement paste blended with supplementary cementitious materials after carbonation	52-61
Dodds, Wayne / Goodier, Chris / Christodoulou, Christian / Austin, Simon / Dunne, David	Durability performance of sustainable structural concrete: Effect of coarse crushed concrete aggregate on microstructure and water ingress	183-195
Zhu, Cong / Niu, Jiangang / Li, Jingjun / Wan, Chaojun / Peng, Jiahui	Effect of aggregate saturation degree on the freeze–thaw resistance of high performance polypropylene fiber lightweight aggregate concrete	367-375
Khanfour, Mohamed-Akram / El Refai, Ahmed	Effect of freeze-thaw cycles on concrete reinforced with basalt-fiber reinforced polymers (BFRP) bars	135-146
Teymen, Ahmet	Effect of mineral admixture types on the grout strength of fully-grouted rockbolts	376-382
Cho, Young-Keun / Yoo, Sung-Won / Jung, Sang-Hwa / Lee, Kwang-Myong / Kwon, Seung-Jun	Effect of Na2O content, SiO2/Na2O molar ratio, and curing conditions on the compressive strength of FA-based geopolymer	253-260
Martín-Morales, M. / Cuenca-Moyano, G. M. / Valverde-Espinosa, I. / Valverde-Palacios, I.	Effect of recycled aggregate on physical-mechanical properties and durability of vibro-compacted dry-mixed concrete hollow blocks	303-310
Zani, L. / Giustozzi, F. / Harvey, J.	Effect of storage stability on chemical and rheological properties of polymer-modified asphalt binders for road pavement construction	326-335
Hosseini Balam, Nafise / Mostofinejad, Davood / Eftekhar, Mohamadreza	Effects of bacterial remediation on compressive strength, water absorption, and chloride permeability of lightweight aggregate concrete	107-116
Cavaco, Eduardo S. / Bastos, Afonso / Santos, Filipe	Effects of corrosion on the behaviour of precast concrete floor systems	411-418
Li, Xiangyu / Liu, Yan Ming / Li, Wen Gui / Li, Chen Yang / Sanjayan, Jay G. / Duan, Wen Hui / Li, Zongjin	Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste	402-410
Li, Chao / Chen, Zongwu / Wu, Shaopeng / Li, Bo / Xie, Jun / Xiao, Yue	Effects of steel slag fillers on the rheological properties of asphalt mastic	383-391
Li, Ming / Liu, Jiaping / Tian, Qian / Wang, Yujiang / Xu, Wen	Efficacy of internal curing combined with expansive agent in mitigating shrinkage deformation of concrete under variable temperature condition	354-360
de Almeida Souza, Luan. Rodrigo / Farias de Medeiros, Marcelo Henrique / Pereira, Eduardo / Capraro, Ana Paula Brandão	Electrochemical chloride extraction: Efficiency and impact on concrete containing 1% of NaCl	435-444
Ulzurrun, Gonzalo S. D. / Zanuy, Carlos	Enhancement of impact performance of reinforced concrete beams without stirrups by adding steel fibers	166-182
Shi, Tao / Zheng, Liwei / Xu, Xiuchao	Evaluation of alkali reactivity of concrete aggregates via AC impedance spectroscopy	548-554
Gong, Minghui / Zhu, Haoran / Pauli, Troy / Yang, Jun / Wei, Jianming / Yao, Zeheng	Evaluation of bio-binder modified asphalt's adhesion behavior using sessile drop device and atomic force microscopy	42-51
Wu, Shenghua / Li, Xiaojun	Evaluation of effect of curing time on mixture performance of Advera warm mix asphalt	62-67
Fan, Haifeng / Vassilopoulos, Anastasios P. / Keller, Thomas	Evaluation of grout materials for CFRP ground anchors with strap ends	196-206
Zhang, Jinrui / Ding, Xiaoping / Zhao, Qingxin	Experimental and numerical investigation of scattering gravels on the surface bond strength of self-compacting concrete	11-19
Lee, Su Hyung / Lee, Sung Jin / Park, Jeung Geun / Choi, Yeong-Tae	An experimental study on the characteristics of polyurethane-mixed coarse aggregates by large-scale triaxial test	117-125
Luo, Sang / Qian, Zhendong / Yang, Xu / Lu, Qing	Fatigue behavior of epoxy asphalt concrete and its moisture susceptibility from flexural stiffness and phase angle	506-517
Dehghani, Morteza / Tremblay, Robert / Leclerc, Martin	Fatigue failure of 350WT steel under large-strain seismic loading at room and subfreezing temperatures	602-618
Lei, Dong / Zhang, Pei / He, Jintao / Bai, Pengxiang / Zhu, Feipeng	Fatigue life prediction method of concrete based on energy dissipation	419-425
Irshidat, Mohammad R. / Al-Saleh, Mohammed H.	Flexural strength recovery of heat-damaged RC beams using carbon nanotubes modified CFRP	474-482
Foglar, Marek / Hajek, Radek / Fladr, Josef / Pachman, Jiri / Stoller, Jiri	Full-scale experimental testing of the blast resistance of HPFRC and UHPFRC bridge decks	588-601
Rasool, Raqiqa tur / Wang, Shifeng / Zhang, Yong / Li, Yue / Zhang, Guangtai	Improving the aging resistance of SBS modified asphalt with the addition of highly reclaimed rubber	126-134
Ranieri, Vittorio / Kowalski, Karol J. / Berloco, Nicola / Colonna, Pasquale / Perrone, Paola	Influence of wax additives on the properties of porous asphalts	261-271
Zhang, Dongmei / Zhang, Henglong / Shi, Caijun	Investigation of aging performance of SBS modified asphalt with various aging methods	445-451
Zhang, Jinrui / Xu, Lingna / Zhao, Qingxin	Investigation of carbon fillers modified electrically conductive concrete as grounding electrodes for transmission towers: Computational model and case study	347-353
Chen, Jun / Wang, Hao / Zhu, Hongzhou	Investigation of permeability of open graded asphalt mixture considering effects of anisotropy and two-dimensional flow	318-325
Liu, Peiyao / Farzana, Rifat / Rajarao, Ravindra / Sahajwalla, Veena	Lightweight expanded aggregates from the mixture of waste automotive plastics and clay	283-291
Anania, Laura / D'Agata, Giuseppe	Limit analysis of vaulted structures strengthened by an innovative technology in applying CFRP	336-346
Donnini, Jacopo / Corinaldesi, Valeria	Mechanical characterization of different FRCM systems for structural reinforcement	565-575
Ahmad, Zakiah / Lum, Wei Chen / Lee, Seng Hua / Razlan, Mohd Azran / Wan Mohamad, Wan Hazira	Mechanical properties of finger jointed beams fabricated from eight Malaysian hardwood species	464-473
Mendes, Julia Castro / Kuster Moro, Taís / Santana Figueiredo, Aline / do Carmo Silva, Keoma Defáveri / Cordeiro Silva, Gabriela / Brigolini Silva, Guilherme Jorge / Fiorotti Peixoto, Ricardo André	Mechanical, rheological and morphological analysis of cement-based composites with a new LAS-based air entraining agent	648-661
Gao, Pinhai / Wei, Jiangxiong / Zhang, Tongsheng / Hu, Jie / Yu, Qijun	Modification of chloride diffusion coefficient of concrete based on the electrical conductivity of pore solution	361-366
Xu, Lihua / Deng, Fangqian / Chi, Yin	Nano-mechanical behavior of the interfacial transition zone between steel-polypropylene fiber and cement paste	619-638
El Cheikh, K. / Rémond, S. / Khalil, N. / Aouad, G.	Numerical and experimental studies of aggregate blocking in mortar extrusion	452-463
Alderete, Natalia / Villagrán, Yury / Mignon, Arn / Snoeck, Didier / De Belie, Nele	Pore structure description of mortars containing ground granulated blast-furnace slag by mercury intrusion porosimetry and dynamic vapour sorption	157-165
Wei, Bo / Zhang, Yimin / Bao, Shenxu	Preparation of geopolymers from vanadium tailings by mechanical activation	236-242
Zhu, Wenjun / François, Raoul / Liu, Yong	Propagation of corrosion and corrosion patterns of bars embedded in RC beams stored in chloride environment for various periods	147-156
Valivonis, Juozas / Skuturna, Tomas / Daugevičius, Mykolas / Šneideris, Arnoldas	Punching shear strength of reinforced concrete slabs with plastic void formers	518-527
Bastos, Juceline B. S. / Babadopulos, Lucas F. A. L. / Soares, Jorge B.	Relationship between multiple stress creep recovery (MSCR) binder test results and asphalt concrete rutting resistance in Brazilian roadways	20-27
Wang, Tao / Xiao, Feipeng / Amirkhanian, Serji / Huang, Weidong / Zheng, Mulian	A review on low temperature performances of rubberized asphalt materials	483-505
Overby, David / Kowalsky, Mervyn / Seracino, Rudolf	Stress-strain response of A706 grade 80 reinforcing steel	292-302
Kumar, Sanjeev / Sharma, Ajay Kumar / Sherawat, Deepak / Dutt, Mohit / Gupta, Ramesh Chandra	Technical note on sorption and permeability of concrete containing rubber and quartz sandstone aggregates	311-317
O'Neill, Caoimhe / McPolin, Daniel / Taylor, Su E. / Harte, Annette M. / O'Ceallaigh, Conan / Sikora, Karol S.	Timber moment connections using glued-in basalt FRP rods	226-235
Soliman, Nancy A. / Tagnit-Hamou, Arezki	Using glass sand as an alternative for quartz sand in UHPC	243-252
Wu, Yunpeng / Krishnan, Padmaja / Yu, Liya E. / Zhang, Min-Hong	Using lightweight cement composite and photocatalytic coating to reduce cooling energy consumption of buildings	555-564

Informations
sur cette fiche
IssueID
22631
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - août 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.