Construction and Building Materials - août 2016

Publié:	août 2016

Auteur(s)	Titre	Page(s)
Barros, Sâmea Valensca Alves / Araújo Marciano, João Emanuell / Ferreira, Heber Carlos / Menezes, Romualdo Rodrigues / Neves, Gelmires de Araújo	Addition of quartzite residues on mortars: Analysis of the alkali aggregate reaction and the mechanical behavior	344-351
Riccardi, C. / Cannone Falchetto, A. / Losa, M. / Wistuba, M.	Back-calculation method for determining the maximum RAP content in Stone Matrix Asphalt mixtures with good fatigue performance based on asphalt mortar tests	364-372
Park, Yeonho / Abolmaali, Ali / Kim, Young Hoon / Ghahremannejad, Masoud	Compressive strength of fly ash-based geopolymer concrete with crumb rubber partially replacing sand	43-51
Lin, Wuguang / Ryu, SungWoo / Hao, Han / Cho, Yoon-Ho	Development of a horizontal shifting mechanistic-empirical prediction model for concrete block pavement	245-255
Raposeiras, A. C. / Rojas-Mora, J. / Piffaut, E. / Movilla-Quesada, D. / Castro-Fresno, D.	Development of an estimative model for the optimal tack coat dosage based on aggregate gradation of hot mix asphalt pavements	1-10
Lin, Wuguang / Park, Dae-Geun / Ryu, Sung Woo / Lee, Byeong-Tae / Cho, Yoon-Ho	Development of permeability test method for porous concrete block pavement materials considering clogging	20-26
Kabir, M. H. / Fawzia, S. / Chan, T. H. T. / Badawi, M.	Durability of CFRP strengthened steel circular hollow section member exposed to sea water	216-225
Golpazir, Iman / Ghalandarzadeh, Abbas / Jafari, Mohammad Kazem / Mahdavi, Mehdi	Dynamic properties of polyurethane foam-sand mixtures using cyclic triaxial tests	104-115
Singh, B. / Rahman, M. R. / Paswan, R. / Bhattacharyya, S. K.	Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete	171-179
Kothandaraman, S. / Kandasamy, S. / Sivaraman, K.	The effect of controlled permeable formwork liner on the mechanical and durability properties of self compacting concrete	319-326
Garrido, Mário / Correia, João R. / Keller, Thomas	Effect of service temperature on the shear creep response of rigid polyurethane foam used in composite sandwich floor panels	235-244
Bahmani, Sayed Hessam / Farzadnia, Nima / Asadi, Afshin / Huat, Bujang B. K.	The effect of size and replacement content of nanosilica on strength development of cement treated residual soil	294-306
Lin, Hongwei / Zhao, Yuxi	Effects of confinements on the bond strength between concrete and corroded steel bars	127-138
El-Gamal, S. E. / Al-Nuaimi, A. / Al-Saidy, A. / Al-Lawati, A.	Efficiency of near surface mounted technique using fiber reinforced polymers for the flexural strengthening of RC beams	52-62
Behbahani, H. / Ziari, H. / Kamboozia, N.	Evaluation of the visco-elasto-plastic behavior of glasphalt mixtures through generalized and classic Burger's models modification	36-42
Hassanieh, A. / Valipour, H. R. / Bradford, M. A.	Experimental and analytical behaviour of steel-timber composite connections	63-75
Prusty, Rajesh Kumar / Rathore, Dinesh Kumar / Singh, Bhanu Pratap / Mohanty, Sarat Chandra / Mahato, Kishore Kumar / Ray, Bankim Chandra	Experimental optimization of flexural behaviour through inter-ply fibre hybridization in FRP composite	327-336
Chen, Xia / Yang, Hua-quan / Li, Wen-wei	Factors analysis on autogenous volume deformation of MgO concrete and early thermal cracking evaluation	276-285
Duan, Ping / Yan, Chunjie / Zhou, Wei / Ren, Daming	Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle	76-88
Tannert, Thomas	Improved performance of reinforced rounded dovetail joints	262-267
Du, Shaowen	Influence of chemical additives on mixing procedures and performance properties of asphalt emulsion recycled mixture with reclaimed cement-stabilized macadam	146-154
Cheng, Yongchun / Tao, Jinglin / Jiao, Yubo / Tan, Guojin / Guo, Qinglin / Wang, Shurong / Ni, Ping	Influence of the properties of filler on high and medium temperature performances of asphalt mastic	268-275
Rao, S. Krishna / Sravana, P. / Rao, T. Chandrasekhar	Investigating the effect of M-sand on abrasion resistance of Fly Ash Roller Compacted Concrete (FRCC)	352-363
Chung, Sang-Yeop / Abd Elrahman, Mohamed / Stephan, Dietmar / Kamm, Paul H.	Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography	204-215
Ulusu, Hayati / Aruntas, Huseyin Yilmaz / Gencel, Osman	Investigation on characteristics of blended cements containing pumice	11-19
Li, Jing jun / Niu, Jian gang / Wan, Chao jun / Jin, Biao / Yin, Ya liu	Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete	27-35
Muñoz-Ruiperez, C. / Rodríguez, A. / Gutiérrez-González, S. / Calderón, V.	Lightweight masonry mortars made with expanded clay and recycled aggregates	139-145
Hung, Chung-Chan / Su, Yen-Fang	Medium-term self-healing evaluation of Engineered Cementitious Composites with varying amounts of fly ash and exposure durations	194-203
Uchima, Juan S. / Restrepo-Baena, Oscar Jaime / Tobón, Jorge I.	Mineralogical evolution of portland cement blended with metakaolin obtained in simultaneous calcination of kaolinitic clay and rice husk	286-293
Negrão, João H. / Brito, Leandro D. / Dias, Alfredo G. / Júnior, Carlito C. / Lahr, Francisco R.	Numerical and experimental study of small-scale moment-resistant reinforced concrete joints for timber frames	89-103
Andalib, Ramin / Abd Majid, Muhd Zaimi / Hussin, Mohd Warid / Ponraj, Mohanadoss / Keyvanfar, Ali / Mirza, Jahangir / Lee, Han-Seung	Optimum concentration of Bacillus megaterium for strengthening structural concrete	180-193
Sutherland, L. S. / Sá, M. F. / Correia, J. R. / Guedes Soares, C. / Gomes, A. / Silvestre, N.	Quasi-static indentation response of pedestrian bridge multicellular pultruded GFRP deck panels	307-318
Wang, D. Y. / Wang, Z. Y. / Smith, S. T. / Yu, T.	Size effect on axial stress-strain behavior of CFRP-confined square concrete columns	116-126
Pan, Hongke / Yang, Zisheng / Xu, Fuwei	Study on concrete structure's durability considering the interaction of multi-factors	256-261
Ahmed, N. M. / Mohamed, M. G. / Mabrouk, M. R.	Study on the anticorrosive behavior of new core-shell pigments for protection of reinforced concrete steel in sulfate environment	226-234
Cheng, Yunhong / Huang, Fei / Li, Wenchuan / Liu, Rui / Li, Guanglu / Wei, Jingming	Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete	164-170
Wu, Haijie / Liang, Xu / Huang, Langhuan / Xie, Yushan / Tan, Shaozao / Cai, Xiang	The utilization of cotton stalk bark to reinforce the mechanical and thermal properties of bio-flour plastic composites	337-343
Wu, Hao / Huang, Baoshan / Shu, Xiang / Yin, Jian	Utilization of solid wastes/byproducts from paper mills in Controlled Low Strength Material (CLSM)	155-163

Auteur(s)

Titre

Page(s)

Barros, Sâmea Valensca Alves / Araújo Marciano, João Emanuell / Ferreira, Heber Carlos / Menezes, Romualdo Rodrigues / Neves, Gelmires de Araújo

Addition of quartzite residues on mortars: Analysis of the alkali aggregate reaction and the mechanical behavior

344-351

Riccardi, C. / Cannone Falchetto, A. / Losa, M. / Wistuba, M.

Back-calculation method for determining the maximum RAP content in Stone Matrix Asphalt mixtures with good fatigue performance based on asphalt mortar tests

364-372

Park, Yeonho / Abolmaali, Ali / Kim, Young Hoon / Ghahremannejad, Masoud

Compressive strength of fly ash-based geopolymer concrete with crumb rubber partially replacing sand

43-51

Lin, Wuguang / Ryu, SungWoo / Hao, Han / Cho, Yoon-Ho

Development of a horizontal shifting mechanistic-empirical prediction model for concrete block pavement

245-255

Raposeiras, A. C. / Rojas-Mora, J. / Piffaut, E. / Movilla-Quesada, D. / Castro-Fresno, D.

Development of an estimative model for the optimal tack coat dosage based on aggregate gradation of hot mix asphalt pavements

1-10

Lin, Wuguang / Park, Dae-Geun / Ryu, Sung Woo / Lee, Byeong-Tae / Cho, Yoon-Ho

Development of permeability test method for porous concrete block pavement materials considering clogging

20-26

Kabir, M. H. / Fawzia, S. / Chan, T. H. T. / Badawi, M.

Durability of CFRP strengthened steel circular hollow section member exposed to sea water

216-225

Golpazir, Iman / Ghalandarzadeh, Abbas / Jafari, Mohammad Kazem / Mahdavi, Mehdi

Dynamic properties of polyurethane foam-sand mixtures using cyclic triaxial tests

104-115

Singh, B. / Rahman, M. R. / Paswan, R. / Bhattacharyya, S. K.

Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete

171-179

Kothandaraman, S. / Kandasamy, S. / Sivaraman, K.

The effect of controlled permeable formwork liner on the mechanical and durability properties of self compacting concrete

319-326

Garrido, Mário / Correia, João R. / Keller, Thomas

Effect of service temperature on the shear creep response of rigid polyurethane foam used in composite sandwich floor panels

235-244

Bahmani, Sayed Hessam / Farzadnia, Nima / Asadi, Afshin / Huat, Bujang B. K.

The effect of size and replacement content of nanosilica on strength development of cement treated residual soil

294-306

Lin, Hongwei / Zhao, Yuxi

Effects of confinements on the bond strength between concrete and corroded steel bars

127-138

El-Gamal, S. E. / Al-Nuaimi, A. / Al-Saidy, A. / Al-Lawati, A.

Efficiency of near surface mounted technique using fiber reinforced polymers for the flexural strengthening of RC beams

52-62

Behbahani, H. / Ziari, H. / Kamboozia, N.

Evaluation of the visco-elasto-plastic behavior of glasphalt mixtures through generalized and classic Burger's models modification

36-42

Hassanieh, A. / Valipour, H. R. / Bradford, M. A.

Experimental and analytical behaviour of steel-timber composite connections

63-75

Prusty, Rajesh Kumar / Rathore, Dinesh Kumar / Singh, Bhanu Pratap / Mohanty, Sarat Chandra / Mahato, Kishore Kumar / Ray, Bankim Chandra

Experimental optimization of flexural behaviour through inter-ply fibre hybridization in FRP composite

327-336

Chen, Xia / Yang, Hua-quan / Li, Wen-wei

Factors analysis on autogenous volume deformation of MgO concrete and early thermal cracking evaluation

276-285

Duan, Ping / Yan, Chunjie / Zhou, Wei / Ren, Daming

Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle

76-88

Tannert, Thomas

Improved performance of reinforced rounded dovetail joints

262-267

Du, Shaowen

Influence of chemical additives on mixing procedures and performance properties of asphalt emulsion recycled mixture with reclaimed cement-stabilized macadam

146-154

Cheng, Yongchun / Tao, Jinglin / Jiao, Yubo / Tan, Guojin / Guo, Qinglin / Wang, Shurong / Ni, Ping

Influence of the properties of filler on high and medium temperature performances of asphalt mastic

268-275

Rao, S. Krishna / Sravana, P. / Rao, T. Chandrasekhar

Investigating the effect of M-sand on abrasion resistance of Fly Ash Roller Compacted Concrete (FRCC)

352-363

Chung, Sang-Yeop / Abd Elrahman, Mohamed / Stephan, Dietmar / Kamm, Paul H.

Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography

204-215

Ulusu, Hayati / Aruntas, Huseyin Yilmaz / Gencel, Osman

Investigation on characteristics of blended cements containing pumice

11-19

Li, Jing jun / Niu, Jian gang / Wan, Chao jun / Jin, Biao / Yin, Ya liu

Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete

27-35

Muñoz-Ruiperez, C. / Rodríguez, A. / Gutiérrez-González, S. / Calderón, V.

Lightweight masonry mortars made with expanded clay and recycled aggregates

139-145

Hung, Chung-Chan / Su, Yen-Fang

Medium-term self-healing evaluation of Engineered Cementitious Composites with varying amounts of fly ash and exposure durations

194-203

Uchima, Juan S. / Restrepo-Baena, Oscar Jaime / Tobón, Jorge I.

Mineralogical evolution of portland cement blended with metakaolin obtained in simultaneous calcination of kaolinitic clay and rice husk

286-293

Negrão, João H. / Brito, Leandro D. / Dias, Alfredo G. / Júnior, Carlito C. / Lahr, Francisco R.

Numerical and experimental study of small-scale moment-resistant reinforced concrete joints for timber frames

89-103

Andalib, Ramin / Abd Majid, Muhd Zaimi / Hussin, Mohd Warid / Ponraj, Mohanadoss / Keyvanfar, Ali / Mirza, Jahangir / Lee, Han-Seung

Optimum concentration of Bacillus megaterium for strengthening structural concrete

180-193

Sutherland, L. S. / Sá, M. F. / Correia, J. R. / Guedes Soares, C. / Gomes, A. / Silvestre, N.

Quasi-static indentation response of pedestrian bridge multicellular pultruded GFRP deck panels

307-318

Wang, D. Y. / Wang, Z. Y. / Smith, S. T. / Yu, T.

Size effect on axial stress-strain behavior of CFRP-confined square concrete columns

116-126

Pan, Hongke / Yang, Zisheng / Xu, Fuwei

Study on concrete structure's durability considering the interaction of multi-factors

256-261

Ahmed, N. M. / Mohamed, M. G. / Mabrouk, M. R.

Study on the anticorrosive behavior of new core-shell pigments for protection of reinforced concrete steel in sulfate environment

226-234

Cheng, Yunhong / Huang, Fei / Li, Wenchuan / Liu, Rui / Li, Guanglu / Wei, Jingming

Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete

164-170

Wu, Haijie / Liang, Xu / Huang, Langhuan / Xie, Yushan / Tan, Shaozao / Cai, Xiang

The utilization of cotton stalk bark to reinforce the mechanical and thermal properties of bio-flour plastic composites

337-343

Wu, Hao / Huang, Baoshan / Shu, Xiang / Yin, Jian

Utilization of solid wastes/byproducts from paper mills in Controlled Low Strength Material (CLSM)

155-163

Publicité

Construction and Building Materials - août 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.