Construction and Building Materials - novembre 2015

Publié:	novembre 2015

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Mohebi, Reza / Behfarnia, Kiachehr / Shojaei, Mohammad	Abrasion resistance of alkali-activated slag concrete designed by Taguchi method	792-798
Ko, Ming-Sheng / Chen, Ying-Liang / Jiang, Jhih-Hua	Accelerated carbonation of basic oxygen furnace slag and the effects on its mechanical properties	286-293
Darain, Kh Mahfuz ud / Shamshirband, Sahaboddin / Jumaat, Mohd Zamin / Obaydullah, M.	Adaptive neuro fuzzy prediction of deflection and cracking behavior of NSM strengthened RC beams	276-285
Wang, Xiao-Yong / Park, Ki-Bong	Analysis of compressive strength development of concrete containing high volume fly ash	810-819
Carmo, R. N. F. / Valença, J. / Silva, D. / Dias-Da-Costa, D.	Assessing steel strains on reinforced concrete members from surface cracking patterns	265-275
Calligaris, Guilherme A. / Franco, Margareth K. K. D. / Aldrige, Laurence P. / Rodrigues, Michelle S. / Beraldo, Antônio Ludovico / Yokaichiya, Fabiano / Turrillas, Xavier / Cardoso, Lisandro P.	Assessing the pozzolanic activity of cements with added sugar cane straw ash by synchrotron X-ray diffraction and Rietveld analysis	44-50
Sengun, N. / Demirdag, S. / Ugur, I. / Akbay, D. / Altindag, R.	Assessment of the physical and mechanical variations of some travertines depend on the bedding plane orientation under physical weathering conditions	641-648
Singh, M. / Vinodh Kumar, S. / Waghmare, Sujata A.	Characterization of 6–11th century A.D decorative lime plasters of rock cut caves of Ellora	156-170
Gao, X. / Yu, Q. L. / Brouwers, H. J. H.	Characterization of alkali activated slag–fly ash blends containing nano-silica	397-406
Jamshidi, Ali / Mohd Hasan, Mohd Rosli / Yao, Hui / You, Zhanping / Hamzah, Meor Othman	Characterization of the rate of change of rheological properties of nano-modified asphalt	437-446
Real, Sofia / Bogas, J. Alexandre / Pontes, Jorge	Chloride migration in structural lightweight aggregate concrete produced with different binders	425-436
Mengxiao, Shi / Qiang, Wang / Zhikai, Zhou	Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition	649-655
Berto, Luisa / Saetta, Anna / Talledo, Diego	Constitutive model of concrete damaged by freeze–thaw action for evaluation of structural performance of RC elements	559-569
Yun, Kyong-Ku / Choi, Pangil / Yeon, Jung Heum	Correlating rheological properties to the pumpability and shootability of wet-mix shotcrete mixtures	884-891
Echeverry, Juan S. / Correal, Juan F.	Cyclic behavior of Laminated Guadua Mat sheathing-to-framing connections	69-79
Gentilini, P. / Yazoghli-Marzouk, O. / Delmotte, V. / Descantes, Y.	Determination of the water content of fillerised fine aggregates in the saturated surface dry state	662-670
Kazem, Hamid / Bunn, William G. / Seliem, Hatem M. / Rizkalla, Sami H. / Gleich, Harry	Durability and long term behavior of FRP/foam shear transfer mechanism for concrete sandwich panels	722-734
Al-Mosawe, Alaa / Al-Mahaidi, Riadh / Zhao, Xiao-Ling	Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading	489-501
Awal, A. S. M. Abdul / Shehu, I. A. / Ismail, Mohammad	Effect of cooling regime on the residual performance of high-volume palm oil fuel ash concrete exposed to high temperatures	875-883
Kamali, Mahsa / Ghahremaninezhad, Ali	Effect of glass powders on the mechanical and durability properties of cementitious materials	407-416
Li, Rui / Pei, Jianzhong / Sun, Changle	Effect of nano-ZnO with modified surface on properties of bitumen	656-661
Ji, Tao / Zheng, Deng-Deng / Chen, Xian-Feng / Lin, Xu-jian / Wu, Hwai-Chung	Effect of prewetting degree of ceramsite on the early-age autogenous shrinkage of lightweight aggregate concrete	102-111
Luo, Rong / Zhang, Derun / Zeng, Zhe / Lytton, Robert L.	Effect of surface tension on the measurement of surface energy components of asphalt binders using the Wilhelmy Plate Method	900-909
Cunha, Sandra / Aguiar, José / Pacheco-Torgal, Fernando	Effect of temperature on mortars with incorporation of phase change materials	89-101
Bernal, Susan A.	Effect of the activator dose on the compressive strength and accelerated carbonation resistance of alkali silicate-activated slag/metakaolin blended materials	217-226
Wang, Lei / Zhang, Xuhui / Zhang, Jianren / Ma, Yafei / Liu, Yongming	Effects of stirrup and inclined bar corrosion on shear behavior of RC beams	537-546
Mehrara, A. / Khodaii, A.	Evaluation of moisture conditioning effect on damage recovery of asphalt mixtures during rest time application	294-304
Ma, Tao / Huang, Xiaoming / Zhao, Yongli / Zhang, Yao	Evaluation of the diffusion and distribution of the rejuvenator for hot asphalt recycling	530-536
Karakaş, Ahmet Sertaç / Kuloğlu, Necati / Kök, Baha Vural / Yilmaz, Mehmet	The evaluation of the field performance of the neat and SBS modified hot mixture asphalt	678-684
Behnood, Ali / Verian, Kho Pin / Modiri Gharehveran, Mahsa	Evaluation of the splitting tensile strength in plain and steel fiber-reinforced concrete based on the compressive strength	519-529
Asadollahfardi, Gholamreza / Asadi, Mohsen / Jafari, Hamidreza / Moradi, Abdolmohammad / Asadollahfardi, Rashin	Experimental and statistical studies of using wash water from ready-mix concrete trucks and a batching plant in the production of fresh concrete	305-314
Indacoechea-Vega, I. / Pascual-Muñoz, P. / Castro-Fresno, D. / Calzada-Pérez, M. A.	Experimental characterization and performance evaluation of geothermal grouting materials subjected to heating–cooling cycles	583-592
Khouadjia, Mohamed Lyes Kamel / Mezghiche, Bouzidi / Drissi, Mounsif	Experimental evaluation of workability and compressive strength of concrete with several local sand and mineral additions	194-203
Toraldo, Emanuele / Mariani, Edoardo / Alberti, Susanna / Crispino, Maurizio	Experimental investigation into the thermal behavior of wearing courses for road pavements due to environmental conditions	846-852
Shafabakhsh, G. H. / Ani, O. Jafari	Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates	692-702
Han, Qinghua / Wang, Lichen / Xu, Jie	Experimental research on mechanical properties of transverse enhanced and high-temperature-resistant CFRP tendons for prestressed structure	864-874
Gesoǧlu, Mehmet / Güneyisi, Erhan / Öz, Hatice Öznur / Taha, Ihsan / Yasemin, Mehmet Taner	Failure characteristics of self-compacting concretes made with recycled aggregates	334-344
Micaelo, R. / Pereira, A. / Quaresma, L. / Cidade, M. T.	Fatigue resistance of asphalt binders: Assessment of the analysis methods in strain-controlled tests	703-712
Amin, M. S. / El-Gamal, S. M. A. / Hashem, F. S.	Fire resistance and mechanical properties of carbon nanotubes – clay bricks wastes (Homra) composites cement	237-249
Mertol, Halit Cenan / Baran, Eray / Bello, Hussain Jibril	Flexural behavior of lightly and heavily reinforced steel fiber concrete beams	185-193
Zhou, Yong / Gao, Jie / Sun, Zhihui / Qu, Wenjun	A fundamental study on compressive strength, static and dynamic elastic moduli of young concrete	137-145
Kanellopoulos, A. / Qureshi, T. S. / Al-Tabbaa, A.	Glass encapsulated minerals for self-healing in cement based composites	780-791
Phoo-ngernkham, Tanakorn / Sata, Vanchai / Hanjitsuwan, Sakonwan / Ridtirud, Charoenchai / Hatanaka, Shigemitsu / Chindaprasirt, Prinya	High calcium fly ash geopolymer mortar containing Portland cement for use as repair material	482-488
Holstov, Artem / Bridgens, Ben / Farmer, Graham	Hygromorphic materials for sustainable responsive architecture	570-582
Corrêa, Andréa Aparecida Ribeiro / Mendes, Lourival Marin / Barbosa, Normando Perazzo / Protásio, Thiago de Paula / Campos, Nathalia de Aguiar / Tonoli, Gustavo Henrique Denzin	Incorporation of bamboo particles and "synthetic termite saliva" in adobes	250-256
Zhang, Jiake / Shi, Caijun / Li, Yake / Pan, Xiaoying / Poon, Chi-Sun / Xie, Zhaobin	Influence of carbonated recycled concrete aggregate on properties of cement mortar	1-7
Ge, Zhi / Wang, Yuanyuan / Sun, Renjuan / Wu, Xinsheng / Guan, Yanhua	Influence of ground waste clay brick on properties of fresh and hardened concrete	128-136
Hidallana-Gamage, H. D. / Thambiratnam, D. P. / Perera, N. J.	Influence of interlayer properties on the blast performance of laminated glass panels	502-518
Hemalatha, T. / Ram Sundar, K. R. / Murthy, A. Ramachandra / Iyer, Nagesh R.	Influence of mixing protocol on fresh and hardened properties of self-compacting concrete	119-127
Zhang, Henglong / Zhu, Chongzheng / Yu, Jianying / Shi, Caijun / Zhang, Dongmei	Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles	735-740
Grabiec, Anna M. / Zawal, Daniel / Szulc, Jakub	Influence of type and maximum aggregate size on some properties of high-strength concrete made of pozzolana cement in respect of binder and carbon dioxide intensity indexes	17-24
Ince, Ceren / Derogar, Shahram / Tiryakioğlu, Nesrin Yardımcı / Toklu, Y. Cengiz	The influence of zeolite and powdered Bayburt stones on the water transport kinetics and mechanical properties of hydrated lime mortars	345-352
Yang, Bohan / Weng, Xingzhong	The influence on the durability of semi-flexible airport pavement materials to cyclic wheel load test	171-175
Zheng, Keren / Zhou, Jin / Gbozee, Mulbah	Influences of phosphate tailings on hydration and properties of Portland cement	593-601
Xu, Ouming / Han, Sen / Zhang, Caili / Liu, Yamin / Xiao, Feipeng / Xu, Jin	Laboratory investigation of andesite and limestone asphalt mixtures containing sodium chloride-based anti-icing filler	671-677
Ortiz, R. / Ortiz, P. / Colao, F. / Fantoni, R. / Gómez-Morón, M. A. / Vázquez, M. A.	Laser spectroscopy and imaging applications for the study of cultural heritage murals	35-43
Mueller, A. / Schnell, A. / Ruebner, K.	The manufacture of lightweight aggregates from recycled masonry rubble	376-387
Zhong, Rui / Wille, Kay	Material design and characterization of high performance pervious concrete	51-60
Araujo, Victor M. C. / Bessa, Iuri S. / Castelo Branco, Verônica T. F.	Measuring skid resistance of hot mix asphalt using the aggregate image measurement system (AIMS)	476-481
Rasheed, Mohammad Abdur / Prakash, S. Suriya	Mechanical behavior of sustainable hybrid-synthetic fiber reinforced cellular light weight concrete for structural applications of masonry	631-640
Ferretti, Daniele / Michelini, Elena / Rosati, Gianpaolo	Mechanical characterization of autoclaved aerated concrete masonry subjected to in-plane loading: Experimental investigation and FE modeling	353-365
Sgobba, Sara / Borsa, Massimo / Molfetta, Marcello / Marano, Giuseppe Carlo	Mechanical performance and medium-term degradation of rubberised concrete	820-831
Okoye, F. N. / Durgaprasad, J. / Singh, N. B.	Mechanical properties of alkali activated flyash/Kaolin based geopolymer concrete	685-691
Iqbal, Shahid / Ali, Ahsan / Holschemacher, Klaus / Bier, Thomas A.	Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)	325-333
Si, Wei / Zhou, Xue-yan / Ma, Biao / Li, Ning / Ren, Jun-ping / Chang, Yu-jiao	The mechanism of different thermoregulation types of composite shape-stabilized phase change materials used in asphalt pavement	547-558
Zhang, Weiping / Min, Hongguang / Gu, Xianglin / Xi, Yunping / Xing, Yishan	Mesoscale model for thermal conductivity of concrete	8-16
Kim, Baek-Joong / Yi, Chongku / Kang, Kyung-In	Microwave curing of alkali-activated binder using hwangtoh without calcination	465-475
Gaspar, Florindo / Cruz, Helena / Gomes, Augusto	Modeling the influence of delamination on the mechanical performance of straight glued laminated timber beams	447-455
García, Álvaro / Hassn, Abdushaffi / Chiarelli, Andrea / Dawson, Andrew	Multivariable analysis of potential evaporation from moist asphalt mixture	80-88
Villegas, Laura / Moran, Richard / García, José Jaime	A new joint to assemble light structures of bamboo slats	61-68
Gómez-Meijide, B. / Pérez, I.	Nonlinear elastic behavior of bitumen emulsion-stabilized materials with C&D waste aggregates	853-863
Ahmed, N. M. / Mohamed, M. G. / Mabrouk, M. R. / ELShami, A. A.	Novel anticorrosive pigments based on waste material for corrosion protection of reinforced concrete steel	388-396
Erić, Suzana / Matović, Vesna / Kremenović, Aleksandar / Colomban, Philippe / Batoćanin, Danica Srećković / Nešković, Marina / Jelikić, Aleksa	The origin of Mg sulphate and other salts formed on pure calcium carbonate substrate – Tufa stone blocks built into the Gradac Monastery, Serbia	25-34
Wu, Jun / Liu, Xuemei / Chew, Soon Hoe	Parametric study on cement-based soft-hard-soft (SHS) multi-layer composite pavement against blast load	602-619
Yusuf, Moruf Olalekan	Performance of slag blended alkaline activated palm oil fuel ash mortar in sulfate environments	417-424
Liu, Zhichao / Hansen, Will	Pore damage in cementitious binders caused by deicer salt frost exposure	204-216
Al Aqtash, Umaima / Bandini, Paola	Prediction of unsaturated shear strength of an adobe soil from the soil–water characteristic curve	892-899
Escalera, E. / Garcia, G. / Terán, R. / Tegman, R. / Antti, M.-L. / Odén, M.	The production of porous brick material from diatomaceous earth and Brazil nut shell ash	257-264
Akça, Kutalmış Recep / Çakır, Özgür / Ipek, Metin	Properties of polypropylene fiber reinforced concrete using recycled aggregates	620-630
Petcherdchoo, Aruz	Repairs by fly ash concrete to extend service life of chloride-exposed concrete structures considering environmental impacts	799-809
Yu, Ke-Quan / Lu, Zhou-Dao / Yu, Jiangtao	Residual compressive properties of strain-hardening cementitious composite with different curing ages exposed to high temperature	146-155
Xiao, Feipeng / Putman, Bradley / Amirkhanian, Serji	Rheological characteristics investigation of high percentage RAP binders with WMA technology at various aging states	315-324
Lynn, Ciarán J. / Dhir, Ravindra K. / Ghataora, Gurmel S. / West, Roger P.	Sewage sludge ash characteristics and potential for use in concrete	767-779
Pisano, Gabriele / Royer Carfagni, Gianni	The statistical interpretation of the strength of float glass for structural applications	741-756
Kardos, Adam J. / Durham, Stephan A.	Strength, durability, and environmental properties of concrete utilizing recycled tire particles for pavement applications	832-845
Xue, Xiao / Yang, Jingna / Zhang, Weidong / Jiang, Lihong / Qu, Jian / Xu, Lijin / Zhang, Hongqiang / Song, Jianrong / Zhang, Rongpu / Li, Yanwen / Qin, Jie / Zhang, Ziying	The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose—Part I: Optical properties, estimated cooling effect and relevant properties after dirt and accelerated exposures	176-184
Feng, Huan / Pettinari, Matteo / Stang, Henrik	Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method	366-375
Liu, Peng / Yu, Zhiwu / Guo, Fengqi / Chen, Ying / Sun, Peiwei	Temperature response in concrete under natural environment	713-721
Shafabakhsh, G. H. / Faramarzi, M. / Sadeghnejad, M.	Use of Surface Free Energy method to evaluate the moisture susceptibility of sulfur extended asphalts modified with antistripping agents	456-464
Andreozzi, Laura / Briccoli Bati, Silvia / Fagone, Mario / Ranocchiai, Giovanna / Zulli, Fabio	Weathering action on thermo-viscoelastic properties of polymer interlayers for laminated glass	757-766
Chen, Caiyi / Ji, Tao / Zhuang, Yizhou / Lin, Xujian	Workability, mechanical properties and affinity of artificial reef concrete	227-236
Nadiv, Roey / Shtein, Michael / Peled, Alva / Regev, Oren	WS2 nanotube – Reinforced cement: Dispersion matters	112-118

Informations
sur cette fiche
IssueID
22574
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.