Construction and Building Materials - v. 25, n. 10 (octobre 2011)

Publié:	octobre 2011

Auteur(s)	Titre	Page(s)
Golroo, Amir / Tighe, Susan L.	Alternative modeling framework for pervious concrete pavement condition analysis	4043-4051
Bhatti, Abdul Qadir / Kishi, Norimitsu	An application of impact-response analysis on small-scale RC arch-type beams without stirrups	3972-3976
López-Gayarre, F. / López-Colina, C. / Serrano-López, M. A. / García Taengua, E. / López Martínez, A.	Assessment of properties of recycled concrete by means of a highly fractioned factorial design of experiment	3802-3809
Ozsayin, Berk / Yilmaz, Emre / Ispir, Medine / Özkaynak, Hasan / Yuksel, Ercan / Ilki, Alper	Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames	4017-4024
Abosrra, L. / Ashour, A. F. / Youseffi, M.	Corrosion of steel reinforcement in concrete of different compressive strengths	3915-3925
Li, Fumin / Yuan, Yingshu / Li, Chun-Qing	Corrosion propagation of prestressing steel strands in concrete subject to chloride attack	3878-3885
Raut, S. P. / Ralegaonkar, R. V. / Mandavgane, S. A.	Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks	4037-4042
Hamoush, Sameer / Abu-Lebdeh, Taher / Picornell, Miguel / Amer, Salah	Development of sustainable engineered stone cladding for toughness, durability, and energy conservation	4006-4016
Vlahovic, Milica M. / Martinovic, Sanja P. / Boljanac, Tamara Dj. / Jovanic, Predrag B. / Volkov-Husovic, Tatjana D.	Durability of sulfur concrete in various aggressive environments	3926-3934
Vu, Xuan Hong / Daudeville, Laurent / Malecot, Yann	Effect of coarse aggregate size and cement paste volume on concrete behavior under high triaxial compression loading	3941-3949
Soutsos, Marios N. / Tang, Kangkang / Khalid, Hussain A. / Millard, Stephen G.	The effect of construction pattern and unit interlock on the structural behaviour of block pavements	3832-3840
Akçaözoğlu, Semiha / Atis, Cengiz Duran	Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates	4052-4058
Bondar, Dali / Lynsdale, C. J. / Milestone, N. B. / Hassani, N. / Ramezanianpour, A. A.	Effect of heat treatment on reactivity-strength of alkali-activated natural pozzolans	4065-4071
Shebl, S. S. / Seddeq, H. S. / Aglan, H. A.	Effect of micro-silica loading on the mechanical and acoustic properties of cement pastes	3903-3908
Siddique, Rafat / Chahal, Navneet Kaur	Effect of ureolytic bacteria on concrete properties	3791-3801
Khan, Tabrez Alam / Sharma, D. K.	Effect of waste polymer modifier on the properties of bituminous concrete mixes	3841-3848
Malaiškienė, J. / Vaičienė, M. / Žurauskienė, R.	Effectiveness of technogenic waste usage in products of building ceramics and expanded clay concrete	3869-3877
Berndt, M. L.	Evaluation of coatings, mortars and mix design for protection of concrete against sulphur oxidising bacteria	3893-3902
Miró, Rodrigo / Valdés, Gonzalo / Martínez, Adriana / Segura, Pilar / Rodríguez, Celestino	Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction	3854-3862
Arslan, Deniz / Gürü, Metin / Çubuk, M. Kürşat / Çubuk, Meltem	Improvement of bitumen and bituminous mixtures performances by triethylene glycol based synthetic polyboron	3863-3868
Liu, Zhiyong / Zhang, Yunsheng / Jiang, Qian / Sun, Guowen / Zhang, Wenhua	In situ continuously monitoring the early age microstructure evolution of cementitious materials using ultrasonic measurement	3998-4005
Halicka, Anna	Influence new-to-old concrete interface qualities on the behaviour of support zones of composite concrete beams	4072-4078
Li, Beixing / Ke, Guoju / Zhou, Mingkai	Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete	3849-3853
Agrela, F. / Sánchez de Juan, M. / Ayuso, J. / Geraldes, V. L. / Jiménez, J. R.	Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete	3950-3955
Annerel, E. / Taerwe, L.	Methods to quantify the colour development of concrete exposed to fire	3989-3997
Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard	Microstructure-linked strength properties and impact response of conventional and recycled concrete reinforced with steel and synthetic macro fibres	4025-4036
Chen, Shyh-Haur / Chang, Chao-Shun / Wang, Her-Yung / Huang, Wei-Lun	Mixture design of high performance recycled liquid crystal glasses concrete (HPGC)	3886-3892
Sun, Guowen / Zhang, Yunsheng / Sun, Wei / Liu, Zhiyong / Wang, Caihui	Multi-scale prediction of the effective chloride diffusion coefficient of concrete	3820-3831
Toribio, J. / Kharin, V. / Ayaso, F. J. / González, B. / Matos, J. C. / Vergara, D. / Lorenzo, M.	Numerical and experimental analyses of the plasticity-induced fatigue crack growth in high-strength steels	3935-3940
Chen, Meizhu / Lin, Juntao / Wu, Shaopeng	Potential of recycled fine aggregates powder as filler in asphalt mixture	3909-3914
Abukersh, S. A. / Fairfield, C. A.	Recycled aggregate concrete produced with red granite dust as a partial cement replacement	4088-4094
Pires, Vera / Amaral, P. M. / Rosa, L. G. / Camposinhos, R. S.	Slate flexural and anchorage strength considerations in cladding design	3966-3971
Hui, Zhao / Sun, Wei	Study of properties of mortar containing cathode ray tubes (CRT) glass as replacement for river sand fine aggregate	4059-4064
Bouguerra, K. / Ahmed, E. A. / El-Gamal, S. / Benmokrane, B.	Testing of full-scale concrete bridge deck slabs reinforced with fiber-reinforced polymer (FRP) bars	3956-3965
Won, Jong-Pil / Kang, Hee-Byoung / Lee, Su-Jin / Lee, Sang-Woo / Kang, Joo-Won	Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber	3810-3819
Bhasin, Amit / Izadi, Anoosha / Bedgaker, Swapneel	Three dimensional distribution of the mastic in asphalt composites	4079-4087
Tamrakar, Sandeep / Lopez-Anido, Roberto A.	Water absorption of wood polypropylene composite sheet piles and its influence on mechanical properties	3977-3988

Auteur(s)

Titre

Page(s)

Golroo, Amir / Tighe, Susan L.

Alternative modeling framework for pervious concrete pavement condition analysis

4043-4051

Bhatti, Abdul Qadir / Kishi, Norimitsu

An application of impact-response analysis on small-scale RC arch-type beams without stirrups

3972-3976

López-Gayarre, F. / López-Colina, C. / Serrano-López, M. A. / García Taengua, E. / López Martínez, A.

Assessment of properties of recycled concrete by means of a highly fractioned factorial design of experiment

3802-3809

Ozsayin, Berk / Yilmaz, Emre / Ispir, Medine / Özkaynak, Hasan / Yuksel, Ercan / Ilki, Alper

Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames

4017-4024

Abosrra, L. / Ashour, A. F. / Youseffi, M.

Corrosion of steel reinforcement in concrete of different compressive strengths

3915-3925

Li, Fumin / Yuan, Yingshu / Li, Chun-Qing

Corrosion propagation of prestressing steel strands in concrete subject to chloride attack

3878-3885

Raut, S. P. / Ralegaonkar, R. V. / Mandavgane, S. A.

Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks

4037-4042

Hamoush, Sameer / Abu-Lebdeh, Taher / Picornell, Miguel / Amer, Salah

Development of sustainable engineered stone cladding for toughness, durability, and energy conservation

4006-4016

Vlahovic, Milica M. / Martinovic, Sanja P. / Boljanac, Tamara Dj. / Jovanic, Predrag B. / Volkov-Husovic, Tatjana D.

Durability of sulfur concrete in various aggressive environments

3926-3934

Vu, Xuan Hong / Daudeville, Laurent / Malecot, Yann

Effect of coarse aggregate size and cement paste volume on concrete behavior under high triaxial compression loading

3941-3949

Soutsos, Marios N. / Tang, Kangkang / Khalid, Hussain A. / Millard, Stephen G.

The effect of construction pattern and unit interlock on the structural behaviour of block pavements

3832-3840

Akçaözoğlu, Semiha / Atis, Cengiz Duran

Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates

4052-4058

Bondar, Dali / Lynsdale, C. J. / Milestone, N. B. / Hassani, N. / Ramezanianpour, A. A.

Effect of heat treatment on reactivity-strength of alkali-activated natural pozzolans

4065-4071

Shebl, S. S. / Seddeq, H. S. / Aglan, H. A.

Effect of micro-silica loading on the mechanical and acoustic properties of cement pastes

3903-3908

Siddique, Rafat / Chahal, Navneet Kaur

Effect of ureolytic bacteria on concrete properties

3791-3801

Khan, Tabrez Alam / Sharma, D. K.

Effect of waste polymer modifier on the properties of bituminous concrete mixes

3841-3848

Malaiškienė, J. / Vaičienė, M. / Žurauskienė, R.

Effectiveness of technogenic waste usage in products of building ceramics and expanded clay concrete

3869-3877

Berndt, M. L.

Evaluation of coatings, mortars and mix design for protection of concrete against sulphur oxidising bacteria

3893-3902

Miró, Rodrigo / Valdés, Gonzalo / Martínez, Adriana / Segura, Pilar / Rodríguez, Celestino

Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction

3854-3862

Arslan, Deniz / Gürü, Metin / Çubuk, M. Kürşat / Çubuk, Meltem

Improvement of bitumen and bituminous mixtures performances by triethylene glycol based synthetic polyboron

3863-3868

Liu, Zhiyong / Zhang, Yunsheng / Jiang, Qian / Sun, Guowen / Zhang, Wenhua

In situ continuously monitoring the early age microstructure evolution of cementitious materials using ultrasonic measurement

3998-4005

Halicka, Anna

Influence new-to-old concrete interface qualities on the behaviour of support zones of composite concrete beams

4072-4078

Li, Beixing / Ke, Guoju / Zhou, Mingkai

Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete

3849-3853

Agrela, F. / Sánchez de Juan, M. / Ayuso, J. / Geraldes, V. L. / Jiménez, J. R.

Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete

3950-3955

Annerel, E. / Taerwe, L.

Methods to quantify the colour development of concrete exposed to fire

3989-3997

Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard

Microstructure-linked strength properties and impact response of conventional and recycled concrete reinforced with steel and synthetic macro fibres

4025-4036

Chen, Shyh-Haur / Chang, Chao-Shun / Wang, Her-Yung / Huang, Wei-Lun

Mixture design of high performance recycled liquid crystal glasses concrete (HPGC)

3886-3892

Sun, Guowen / Zhang, Yunsheng / Sun, Wei / Liu, Zhiyong / Wang, Caihui

Multi-scale prediction of the effective chloride diffusion coefficient of concrete

3820-3831

Toribio, J. / Kharin, V. / Ayaso, F. J. / González, B. / Matos, J. C. / Vergara, D. / Lorenzo, M.

Numerical and experimental analyses of the plasticity-induced fatigue crack growth in high-strength steels

3935-3940

Chen, Meizhu / Lin, Juntao / Wu, Shaopeng

Potential of recycled fine aggregates powder as filler in asphalt mixture

3909-3914

Abukersh, S. A. / Fairfield, C. A.

Recycled aggregate concrete produced with red granite dust as a partial cement replacement

4088-4094

Pires, Vera / Amaral, P. M. / Rosa, L. G. / Camposinhos, R. S.

Slate flexural and anchorage strength considerations in cladding design

3966-3971

Hui, Zhao / Sun, Wei

Study of properties of mortar containing cathode ray tubes (CRT) glass as replacement for river sand fine aggregate

4059-4064

Bouguerra, K. / Ahmed, E. A. / El-Gamal, S. / Benmokrane, B.

Testing of full-scale concrete bridge deck slabs reinforced with fiber-reinforced polymer (FRP) bars

3956-3965

Won, Jong-Pil / Kang, Hee-Byoung / Lee, Su-Jin / Lee, Sang-Woo / Kang, Joo-Won

Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber

3810-3819

Bhasin, Amit / Izadi, Anoosha / Bedgaker, Swapneel

Three dimensional distribution of the mastic in asphalt composites

4079-4087

Tamrakar, Sandeep / Lopez-Anido, Roberto A.

Water absorption of wood polypropylene composite sheet piles and its influence on mechanical properties

3977-3988

Publicité

Construction and Building Materials - v. 25, n. 10 (octobre 2011)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - v. 25, n. 10 (octobre 2011)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.