Construction and Building Materials - v. 22, n. 8 (août 2008)

Publié:	août 2008

Auteur(s)	Titre	Page(s)
Smadi, M. M. / Bani Yasin, I. S.	Behavior of high-strength fibrous concrete slab–column connections under gravity and lateral loads	1863-1873
El-Mahllawy, Medhat S.	Characteristics of acid resisting bricks made from quarry residues and waste steel slag	1887-1896
Köksal, Fuat / Altun, Fatih / Yiğit, İlhami / Şahin, Yuşa	Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes	1874-1880
Lo, T. Y. / Tang, W. C. / Nadeem, A.	Comparison of carbonation of lightweight concrete with normal weight concrete at similar strength levels	1648-1655
Altinok, Mustafa / Burdurlu, Erol / Ozkaya, Kadir	Deformation analysis of curved laminated structural wood elements	1643-1647
Yeo, Insoo / Suh, Youngchan / Mun, Sungho	Development of a remaining fatigue life model for asphalt black base through accelerated pavement testing	1881-1886
Hassan, Hossam F. / Al-Nuaimi, Ali / Al-Oraimi, Salim / Jafar, Tufool M. A.	Development of asphalt binder performance grades for Omani climate	1684-1690
Chindaprasirt, Prinya / Rukzon, Sumrerng / Sirivivatnanon, Vute	Effect of carbon dioxide on chloride penetration and chloride ion diffusion coefficient of blended Portland cement mortar	1701-1707
Jain, Neeraj / Garg, Mridul	Effect of Cr(VI) on the hydration behavior of marble dust blended cement: Solidification, leachability and XRD analyses	1851-1856
Demirdag, S. / Ugur, I. / Sarac, S.	The effects of cement/fly ash ratios on the volcanic slag aggregate lightweight concrete masonry units	1730-1735
Özbay, Erdoğan / Gesoǧlu, Mehmet / Güneyisi, Erhan	Empirical modeling of fresh and hardened properties of self-compacting concretes by genetic programming	1831-1840
Ouyang, Xinping / Guo, Yongxia / Qiu, Xueqing	The feasibility of synthetic surfactant as an air entraining agent for the cement matrix	1774-1779
Atzeni, C. / Pia, G. / Sanna, U. / Spanu, N.	A fractal model of the porous microstructure of earth-based materials	1607-1613
Perera, Ricardo / Huerta, Consuelo / Orquı´n, Juan Manuel	Identification of damage in RC beams using indexes based on local modal stiffness	1656-1667
Steiger, Michael / Kiekbusch, Jana / Nicolai, Andreas	An improved model incorporating Pitzer's equations for calculation of thermodynamic properties of pore solutions implemented into an efficient program code	1841-1850
Tangchirapat, Weerachart / Buranasing, Rak / Jaturapitakkul, Chai / Chindaprasirt, Prinya	Influence of rice husk–bark ash on mechanical properties of concrete containing high amount of recycled aggregates	1812-1819
Venkatarama Reddy, B. V. / Gupta, Ajay	Influence of sand grading on the characteristics of mortars and soil–cement block masonry	1614-1623
Mo, Xiangyin / Zhang, Yue / Yao, Jie / Li, Gang / Feng, Yuying	Influence of various parameters on Li2CO3 against alkali–silica reaction	1668-1674
Pavía, S. / Caro, S.	An investigation of Roman mortar technology through the petrographic analysis of archaeological material	1807-1811
Lanzón, Marcos / García-Ruiz, P. A.	Lightweight cement mortars: Advantages and inconveniences of expanded perlite and its influence on fresh and hardened state and durability	1798-1806
Khatib, J. M.	Metakaolin concrete at a low water to binder ratio	1691-1700
Bentayeb, F. / Ait Tahar, K. / Chateauneuf, A.	New technique for reinforcement of concrete columns confined by embedded composite grid	1624-1633
Liska, M. / Al-Tabbaa, A.	Performance of magnesia cements in pressed masonry units with natural aggregates: Production parameters optimisation	1789-1797
Espinosa, Rosa Maria / Franke, Lutz / Deckelmann, Gernod	Phase changes of salts in porous materials: Crystallization, hydration and deliquescence	1758-1773
Torrijos, M. C. / Barragán, B. E. / Zerbino, R. L.	Physical–mechanical properties, and mesostructure of plain and fibre reinforced self-compacting concrete	1780-1788
Zhang, Ji / Wang, Junlong / Wu, Yiqian / Wang, Youpeng / Wang, Yunpu	Preparation and properties of organic palygorskite SBR/organic palygorskite compound and asphalt modified with the compound	1820-1830
Shui, Zhonghe / Xuan, Dongxing / Wan, Huiwen / Cao, Beibei	Rehydration reactivity of recycled mortar from concrete waste experienced to thermal treatment	1723-1729
Zhang, Yongjuan / Zhang, Xiong	Research on effect of limestone and gypsum on C3A, C3S and PC clinker system	1634-1642
Ganesan, K. / Rajagopal, K. / Thangavel, K.	Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete	1675-1683
Chan, Cesar / Hover, Kenneth C. / Folliard, Kevin J.	Segmental retaining wall (SRW) split face delaminations and practical implications	1749-1757
Chindaprasirt, P. / Rukzon, S.	Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar	1601-1606
Girhammar, Ulf Arne / Pajari, Matti	Tests and analysis on shear strength of composite slabs of hollow core units and concrete topping	1708-1722
Degirmenci, Nurhayat	Utilization of phosphogypsum as raw and calcined material in manufacturing of building products	1857-1862
Pavlík, Zbyšek / Michálek, Petr / Pavlíková, Milena / Kopecká, Ivana / Maxová, Ivana / Černý, Robert	Water and salt transport and storage properties of Mšené sandstone	1736-1748

Auteur(s)

Titre

Page(s)

Smadi, M. M. / Bani Yasin, I. S.

Behavior of high-strength fibrous concrete slab–column connections under gravity and lateral loads

1863-1873

El-Mahllawy, Medhat S.

Characteristics of acid resisting bricks made from quarry residues and waste steel slag

1887-1896

Köksal, Fuat / Altun, Fatih / Yiğit, İlhami / Şahin, Yuşa

Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes

1874-1880