Construction and Building Materials - v. 22, n. 4 (avril 2008)

Publié:	avril 2008

Auteur(s)	Titre	Page(s)
Bitaraf, M. / Mohammadi, S.	Analysis of chloride diffusion in concrete structures for prediction of initiation time of corrosion using a new meshless approach	546-556
Peng, Gai-Fei / Huang, Zhi-Shan	Change in microstructure of hardened cement paste subjected to elevated temperatures	593-599
Mueller, A. / Sokolova, S. N. / Vereshagin, V. I.	Characteristics of lightweight aggregates from primary and recycled raw materials	703-712
Goktepe, A. B. / Sezer, A. / Sezer, G. İ. / Ramyar, K.	Classification of time-dependent unconfined strength of fly ash treated clay	675-683
Kim, Bumjoo / Prezzi, Monica	Compaction characteristics and corrosivity of Indiana class-F fly and bottom ash mixtures	694-702
Felekoğlu, Burak	A comparative study on the performance of sands rich and poor in fines in self-compacting concrete	646-654
Söylev, T. A. / Richardson, M. G.	Corrosion inhibitors for steel in concrete: State-of-the-art report	609-622
Niu, L. / Cheng, Y. F.	Development of innovative coating technology for pipeline operation crossing the permafrost terrain	417-422
Lo, Tommy Y. / Cui, H. Z. / Tang, W. C. / Leung, W. M.	The effect of aggregate absorption on pore area at interfacial zone of lightweight concrete	623-628
Ahmedzade, Perviz / Yilmaz, Mehmet	Effect of polyester resin additive on the properties of asphalt binders and mixtures	481-486
Yazıcı, Halit	The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete	456-462
Trocónis de Rincón, Oladis / Hernández-López, Yolanda / de Valle-Moreno, Angélica / Torres-Acosta, Andrés A. / Barrios, Freddy / Montero, Pablo / Oidor-Salinas, Patricia / Montero, José Rodríguez	Environmental influence on point anodes performance in reinforced concrete	494-503
Roma, Luiz C. / Martello, Luciane S. / Savastano, Holmer	Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers	668-674
Yang, Te-Hsin / Wang, Song-Yung / Lin, Cheng-Jung / Tsai, Ming-Jer	Evaluation of the mechanical properties of Douglas-fir and Japanese cedar lumber and its structural glulam by nondestructive techniques	487-493
Chen, Bing / Liu, Juanyu	Experimental application of mineral admixtures in lightweight concrete with high strength and workability	655-659
Hindi, Riyadh / Turechek, Wesley	Experimental behavior of circular concrete columns under reversed cyclic loading	684-693
Corradi, M. / Tedeschi, C. / Binda, L. / Borri, A.	Experimental evaluation of shear and compression strength of masonry wall before and after reinforcement: Deep repointing	463-472
Chow, W. K. / Leung, C. W. / Zou, Gaowan / Dong, Hui / Gao, Ye	Flame spread over plastic materials in flashover room fires	629-634
Benayoune, A. / Samad, A. A. Abdul / Trikha, D. N. / Ali, A. A. Abang / Ellinna, S. H. M.	Flexural behaviour of pre-cast concrete sandwich composite panel – Experimental and theoretical investigations	580-592
Aydın, Serdar / Yazıcı, Halit / Baradan, Bülent	High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers	504-512
Özçifçi, Ayhan / Özpak, Ahmet Sertan	Impacts of impregnation solutions on the adhesion strength of outer usage varnish coatings	513-520
Özçifçi, Ayhan	Impacts of impregnation with boron compounds on the bonding strength of wood materials	541-545
Li, Jianquan / Li, Guozhong / Yu, Yanzhen	The influence of compound additive on magnesium oxychloride cement/urban refuse floor tile	521-525
Tossavainen, Mia / Lind, Lotta	Leaching results of reactive materials	566-572
Arisoy, Bengi / Wu, Hwai-Chung	Material characteristics of high performance lightweight concrete reinforced with PVA	635-645
Leivo, Virpi / Rantala, Jukka	Moisture behaviour of slab-on-ground structures in operating conditions: Steady-state analysis	526-531
Wardeh, G. / Perrin, B.	Numerical modelling of the behaviour of consolidated porous media exposed to frost action	600-608
Felekoğlu, Burak	Optimization of self-compacting filling grout mixtures for repair purposes	660-667
Topçu, İlker Bekir / Sarıdemir, Mustafa	Prediction of rubberized concrete properties using artificial neural network and fuzzy logic	532-540
Qiao, X. C. / Ng, B. R. / Tyrer, M. / Poon, C. S. / Cheeseman, C. R.	Production of lightweight concrete using incinerator bottom ash	473-480
Poutos, K. H. / Alani, A. M. / Walden, P. J. / Sangha, C. M.	Relative temperature changes within concrete made with recycled glass aggregate	557-565
El Maaddawy, Tamer / Soudki, Khaled	Strengthening of reinforced concrete slabs with mechanically-anchored unbonded FRP system	444-455
Benazzouk, A. / Douzane, O. / Mezreb, K. / Laidoudi, B. / Queneudec, M.	Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling	573-579
Apostolopoulos, Charis / Sotiropoulos, Panagiotis	Venetian churches of Lefkada, Greece Construction documentation and seismic behaviour "Virgin Mary of the Strangers"	434-443
Berdahl, Paul / Akbari, Hashem / Levinson, Ronnen / Miller, William A.	Weathering of roofing materials – An overview	423-433

Auteur(s)

Titre

Page(s)

Bitaraf, M. / Mohammadi, S.

Analysis of chloride diffusion in concrete structures for prediction of initiation time of corrosion using a new meshless approach

546-556

Peng, Gai-Fei / Huang, Zhi-Shan

Change in microstructure of hardened cement paste subjected to elevated temperatures

593-599

Mueller, A. / Sokolova, S. N. / Vereshagin, V. I.

Characteristics of lightweight aggregates from primary and recycled raw materials

703-712

Goktepe, A. B. / Sezer, A. / Sezer, G. İ. / Ramyar, K.

Classification of time-dependent unconfined strength of fly ash treated clay

675-683

Kim, Bumjoo / Prezzi, Monica

Compaction characteristics and corrosivity of Indiana class-F fly and bottom ash mixtures

694-702

Felekoğlu, Burak

A comparative study on the performance of sands rich and poor in fines in self-compacting concrete

646-654

Söylev, T. A. / Richardson, M. G.

Corrosion inhibitors for steel in concrete: State-of-the-art report

609-622

Niu, L. / Cheng, Y. F.

Development of innovative coating technology for pipeline operation crossing the permafrost terrain

417-422

Lo, Tommy Y. / Cui, H. Z. / Tang, W. C. / Leung, W. M.

The effect of aggregate absorption on pore area at interfacial zone of lightweight concrete

623-628

Ahmedzade, Perviz / Yilmaz, Mehmet

Effect of polyester resin additive on the properties of asphalt binders and mixtures

481-486

Yazıcı, Halit

The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete

456-462

Trocónis de Rincón, Oladis / Hernández-López, Yolanda / de Valle-Moreno, Angélica / Torres-Acosta, Andrés A. / Barrios, Freddy / Montero, Pablo / Oidor-Salinas, Patricia / Montero, José Rodríguez

Environmental influence on point anodes performance in reinforced concrete

494-503

Roma, Luiz C. / Martello, Luciane S. / Savastano, Holmer

Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers

668-674

Yang, Te-Hsin / Wang, Song-Yung / Lin, Cheng-Jung / Tsai, Ming-Jer

Evaluation of the mechanical properties of Douglas-fir and Japanese cedar lumber and its structural glulam by nondestructive techniques

487-493

Chen, Bing / Liu, Juanyu

Experimental application of mineral admixtures in lightweight concrete with high strength and workability

655-659

Hindi, Riyadh / Turechek, Wesley