0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Steel and hybrid stress-ribbon pedestrian bridges

Auteur(s):





Médium: papier de conférence
Langue(s): anglais
Conférence: IABSE Symposium: Long-Span and High-Rise Structures, Kobe, Japan, September 1998
Publié dans:
Page(s): 329-334
Année: 1998
DOI: 10.5169/seals-59882
Abstrait: Not only the deck weight but also the sag ratio should be reduced in order that the type of stressnbbon may be applicable to roadway bridges. The deck weight of the proposed steel stressnbbon bridge could be reduced up to one-tenth of the conventional concrete stress-nbbon bridges. In another proposed hybrid structure, half of the inner cables inside this steel deck are stretehed outside and hfted up over the decks close to the abutments and supported by low towers. The side decks are hfted up honzontally by introducing the pre-tension force in the hangers suspended by the outer cables. Thus, this 'stress-nbbon Suspension bridge' type construcuon allows for a reduction in the deck sag as well an increase in the sag of about half of the cables remarkably yielding a remarkable reduction in the horizontal component of the tensile force in them.
Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.5169/seals-59882.
  • Informations
    sur cette fiche
  • Reference-ID
    10016562
  • Publié(e) le:
    09.01.2005
  • Modifié(e) le:
    04.08.2019
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine