0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Modal identification for superstructure using virtual impulse response

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Structural Engineering, , n. 16, v. 22
Page(s): 136943321986295
DOI: 10.1177/1369433219862951
Abstrait:

In civil engineering, structural modes are identified with the assumption of stationary white noise, which cannot be satisfied in practical engineering. This article proposes a new method, which contains the virtual impulse response and eigensystem realization algorithm. The formulation of virtual impulse response is derived from the inverse Fourier transform of the ratio of the cross-power to auto-power spectral density functions of the measurement responses, which is based on the concept of frequency response function. During the formulation derivation, a single point excitation is only considered. Frequency response function would not change with different excitations and responses, which means that the excitation cannot influence frequency response function. The impulse response is pointed out to only represent the behavior of superstructure. After obtaining impulse responses, eigensystem realization algorithm is then performed to identify the modes of superstructure. The proposed method is validated by a numerical example. The results show that virtual impulse response can have much better free decayed behavior than natural excitation technique and identify very precise modal parameters for superstructure.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1177/1369433219862951.
  • Informations
    sur cette fiche
  • Reference-ID
    10323387
  • Publié(e) le:
    22.07.2019
  • Modifié(e) le:
    07.11.2019
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine